Parts for Lg LFC25765SB: Door Parts

This door holder secures the microwave door assembly to the cabinet, restoring proper alignment and a snug close. Replace a broken or worn plastic retainer to reduce rattling and help the door seat correctly. What it does:

• Secures the door assembly to the oven frame so the door sits flush and aligned
• Helps the door engage the latch correctly for reliable closing
• Reduces door movement and rattling caused by a cracked or missing retainer
• Commonly replaced when the door feels loose, sags, or won't stay properly seated

• One door holder

• Disconnect power before starting work; never service a microwave while it's energized
• Remove door trim and glass panels carefully to avoid damage; keep track of small screws and clips
• Test door alignment and smooth operation after installation; do not force parts into place

This door gasket assembly replaces a worn or damaged refrigerator door seal to restore a tight closure and help maintain proper internal temperature. It fits the specified LG door opening and restores the cabinet-to-door seal. What it does:

• Seals the door perimeter to prevent warm air intrusion and reduce frost build-up.
• Helps maintain consistent internal temperature for food safety and efficient cooling.
• Reduces condensation and moisture that can lead to odor or spoilage.
• Addresses common symptoms like visible tears, gaps, or poor door closure.

• High-level replacement: remove the old gasket, clean the door channel, and press the new gasket into the retainer groove following the OEM pattern.
• Inspect the door frame and retainer for damage before installing; a warped frame can prevent a proper seal.
• Use gentle heat only if needed to ease seating; avoid open flames or excessive heat.
• Disconnect power to the appliance or follow manufacturer safety instructions if removing doors or working near electrical components.

This freezer handle assembly replaces a cracked, loose, or missing freezer door handle to restore safe opening and closing and improve grip. It fits original mounting points for a factory-like appearance and function. What it does:

• Replaces a damaged or worn freezer door handle so the door can be opened and closed securely
• Restores proper grip and lever action to prevent accidental drops or slippage
• Helps maintain door alignment when pulling to reduce stress on the latch and seal
• Compatible with factory bracket and mounting hardware where the original design is intact

• One freezer door handle assembly

• Check that existing mounting screws or trim clips are present and undamaged before installation
• Some installations require removing interior trim or lifting the door slightly to align mounting pins
• Use hand tools only; avoid overtightening fasteners which can crack plastic parts
• Disconnect power or follow manufacturer safety guidance if working near electrical components or lights

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

The Refrigerator Set Screw is an OEM part for LG refrigerators. This small but crucial component is used to secure various parts of the refrigerator, ensuring stability and proper alignment of the internal components. This set screw is sold individually.

Causes of a bad set screw can include stripping due to over-tightening, corrosion from moisture exposure, or wear and tear over time. A loose or missing set screw can lead to instability and misalignment of the refrigerator parts, potentially causing operational issues.

Symptoms of a bad refrigerator set screw include:

• Loose or wobbly internal components
• Doors not closing properly or misaligned
• Unusual noises from inside the refrigerator
• Parts becoming detached or misaligned

This OEM LG part is also compatible with Sears/Kenmore models.

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

The Mullion Flipper Assembly is an OEM part for LG refrigerators. This assembly, located between the refrigerator doors, helps seal the space between the doors when they are closed, improving energy efficiency by preventing cold air from escaping.

Causes of a bad mullion flipper assembly can include wear and tear over time, damage from frequent opening and closing of the doors, or issues with the hinges and connectors that secure it in place. A damaged or malfunctioning mullion flipper can lead to temperature inconsistencies and increased energy usage.

Symptoms of a bad mullion flipper assembly include:

• Visible damage or wear on the assembly
• Cold air escaping from between the refrigerator doors
• Increased frost buildup inside the refrigerator
• Higher energy bills due to the appliance working harder to maintain temperature

This OEM LG part is also compatible with Sears/Kenmore models.

This replacement door basket mounts on the refrigerator's fresh-food door to hold bottles, jars, and condiments. Restore secure, organized storage and prevent items from tipping or falling when the door opens and closes.

• Holds and organizes items on the refrigerator door
• Direct replacement for a cracked, broken, or missing bin
• Helps prevent spills and items falling during door operation
• Common symptoms: bin cracked, loose, falls off, or won't stay seated

• Unplug the refrigerator and remove contents from the bin before replacement
• Doors may use different bins by position—match location to your model diagram
• Align bin hooks with the door slots and press down until fully seated

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators. This hinge supports the refrigerator door, allowing it to open and close smoothly while maintaining proper alignment. It is designed to handle the weight of the door and ensure a secure and stable operation over time.

Causes of a bad lower refrigerator door hinge can include regular wear and tear, physical damage from overloading or impacts, and gradual loosening over time. A faulty hinge can lead to misalignment, difficulty in opening or closing the door, and potential damage to the door seal.

Symptoms of a bad lower refrigerator door hinge include:

• The door not closing properly or staying open
• Sagging or misaligned door
• Unusual noises when opening or closing the door
• Gaps in the door seal, causing cooling inefficiency

This OEM LG part is also compatible with Sears/Kenmore models.

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators, designed to support and pivot the refrigerator door, allowing it to open and close smoothly. This hinge is a critical component for the proper alignment and function of the door, ensuring an airtight seal when closed to maintain the internal temperature and efficiency of the refrigerator.

Causes of damage to the lower refrigerator door hinge often include normal wear and tear, excessive force when opening or closing the door, or corrosion due to moisture and cleaning agents. 

Symptoms of a bad Lower Refrigerator Door Hinge include:

• Difficulty in opening or closing the refrigerator door.
• A door that hangs unevenly or does not close properly
• Unusual noises during door operation 
• Visible wear or damage to the hinge itself.

This OEM LG part is also compatible with some Kenmore models.

This connector secures and transmits motion between the drawer drive and the sliding assembly, restoring smooth drawer movement and alignment. It's a direct-fit replacement that helps fix sticking, slipping, or non-moving drawers. What it does:

• Couples the drawer drive mechanism to the sliding gear, allowing the drawer to open and close reliably
• Replaces worn or broken connector teeth or mounts that cause skipping or jammed operation
• Helps correct uneven or noisy drawer movement caused by damaged linkage
• Restores proper engagement so the drawer responds to normal open/close controls

• One connector as shown

• Disconnect power to the appliance before servicing to avoid electrical shock or injury
• Inspect surrounding gears, tracks, and mounting points; replace any damaged parts for best results
• Basic hand tools are typically required; handle plastic gears carefully to avoid further damage