Parts for Lg LRFCS2503S/00: Door Parts

Secure refrigerator panels, brackets, and internal components with this replacement mounting screw. Ideal for missing, stripped, or damaged fasteners.

Replace your refrigerator's rear handle if it's cracked, broken, or missing. This structural support handle mounts to the back panel of your unit.

Replace your broken or cracked refrigerator door bin holder. This structural component secures door bins in place on bottom-mount refrigerators.

Replace your refrigerator's adjustable leveling leg assembly if cracked, broken, or missing. Installs at the base to level and stabilize your unit.

Multi-duct assembly for bottom-mount refrigerators. Includes insulation, damper assembly, thermistor, and wiring harness. Replace if cracked or broken.

Plastic rail holder that secures shelf rails inside your refrigerator. Replace this component when cracked, broken, or missing to restore shelf stability.

Holder assembly for bottom-mount refrigerators. Replaces broken, cracked, or missing holder components. Secures internal parts in place.

Rail guide assembly secures and guides refrigerator drawers for smooth sliding. Replaces broken, cracked, or worn guides causing misalignment or sticking.

Replacement freezer drip tray that installs inside the freezer compartment to catch drips and keep the interior organized. Replaces cracked or missing trays.

Freezer drawer roller assembly for refrigerators. Installs on bottom drawer to enable smooth gliding. Replace if roller is cracked, broken, or worn.

Roller assembly for refrigerator freezer drawers. Replaces broken, cracked, or missing rollers that prevent smooth drawer gliding. Snaps into place.

Replaces the drawer liner tray that forms the structural shelf inside your refrigerator drawer. Needed when the original is cracked, warped, or broken.

Refrigerator drawer tray assembly that supports and guides sliding drawers. Replace if cracked, broken, warped, or missing to restore level storage space.

Replacement drawer tray assembly for bottom-mount refrigerators. Restores storage space when original is cracked, warped, or broken. Direct fit.

Glass refrigerator shelf provides a stable surface for storing food inside your fridge. Replaces cracked, broken, or missing shelves to restore storage.

Covers the retractable flex zone tray area in your refrigerator door. Replace if warped, cracked, or deformed from temperature changes or wear.

Replacement rail holder that secures sliding rails in your refrigerator. Installs on the frame to restore alignment. Needed when cracked or broken.

Microwave door won't close properly or wobbles? This rail holder secures the door rail assembly to restore smooth alignment and operation.

Fresh room tray assembly for bottom-mount refrigerators. Holds fruits and vegetables in dedicated storage compartment. Replace if cracked or broken.

Covers the flex zone adjustable tray area in your refrigerator door when retracted. Replace if warped, cracked, broken, or missing from temperature damage.

This Vegetable Tray Assembly replaces a damaged or worn crisper pan to keep produce contained and stable in the refrigerator. It restores a clean, level surface for fruits and vegetables and helps maintain normal storage organization. What it does:

• Replaces cracked, warped, or broken crisper drawer pans that allow leaks or unstable storage
• Provides a smooth, easy-to-clean surface for storing fruits and vegetables
• Supports proper drawer alignment so the crisper slides in and out smoothly
• Helps prevent produce from sitting in spills or pooling liquids

• Disconnect power to the refrigerator or follow the manufacturer's safety guidance before servicing.
• Remove the existing crisper drawer and slide the tray into the drawer compartment, aligning rails and stops.
• Inspect drawer tracks and guides for damage; replace or clean as needed to ensure smooth operation.

A replacement vegetable tray assembly that holds produce in the refrigerator crisper area and restores proper storage support and airflow. Designed to fit into the factory crisper slot and keep fruits and vegetables organized. What it does:

• Replaces a cracked, warped, or missing crisper tray to restore stable storage for produce
• Supports the crisper drawer and helps maintain proper airflow around stored items
• Prevents direct contact between produce and the refrigerator floor, reducing bruising
• Fits into the existing crisper housing and works with the factory slide/rail system

• Installation is user-serviceable; remove crisper drawer and slide the tray into place on the rails
• Inspect surrounding rails and supports for damage before installing the new tray
• Use gentle pressure to seat the tray—do not force or bend the part
• Unplug refrigerator or disconnect power if removing components that expose electrical parts

Replaces cracked, broken or missing glass cover for the vegetable drawer in your bottom-mount refrigerator. Restores a clean appearance and protection.

Insulating foam assembly that fits inside the freezer door panel. Replace when foam is compressed, damaged, or missing to restore proper door insulation.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Small stopper that fits inside the handle assembly to limit travel and keep the handle properly seated. Replace if worn, missing, or broken to restore secure feel.

Insulating foam insert for refrigerator doors. Replace when door feels warm, seals poorly, or causes temperature fluctuations. Verify fit by model number.

Seals your refrigerator door to keep cold air in and prevent moisture buildup. Replace when torn, loose, or not sealing properly. Confirm fit with model.

Restores front cavity trim and protects internal components. Replace when damaged or worn to maintain proper seal and appearance. Verify fit with model.

Drawer guide rail for bottom-mount refrigerators. Installs on the side of the drawer to provide smooth sliding. Replace if cracked, broken, or worn.

Replace a broken or cracked refrigerator door basket that's causing items to fall or tip over. Restores convenient door storage in minutes.

Door stopper assembly for refrigerators. Installs on the door to limit opening angle and prevent wall damage. Replace if cracked, broken, or missing.

Door stop assembly for bottom-mount refrigerators. Mounts inside the door to control door closing and sealing. Replace if broken, cracked, or missing.

Fix clicking doors or misaligned refrigerator doors with a new hinge cam. Restores smooth open/close action and proper door alignment. DIY-friendly repair.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.

Replacement refrigerator door handle assembly. Installs on refrigerator door. Needed when original handle is cracked, broken, or damaged.

Slide rail for bottom-mount refrigerator freezer drawer. Replaces broken, binding, or worn rails that prevent drawer from opening or closing smoothly.

Slide rail for bottom-mount refrigerator freezer drawers. Replaces broken, cracked, or binding rails causing uneven drawer movement or closure issues.

Fixes intermittent cooling or component failures caused by loose or damaged wiring connections. This connector assembly restores secure electrical links.

Replace your refrigerator's center hinge assembly to fix sagging doors, uneven gaps, and alignment issues. Restores smooth operation and proper sealing.

Service spanner tool for refrigerator maintenance. Provides secure grip for loosening and tightening service fittings and retaining nuts. Replace if lost.

Secures and pivots the refrigerator door at the top. Replace this upper hinge assembly if it's cracked, broken, or causing misalignment issues.

Upper door hinge assembly supports your refrigerator door and ensures proper alignment. Replace if door sags, rubs, or won't seal. Verify fit with your model.

This display case assembly is the outer housing that holds the control board and user interface, restoring a finished, protective surface and visible display for the appliance. It helps protect electronics and keeps controls accessible and readable. What it does:

• Houses and protects the control board and display components from dust and moisture
• Provides the visible interface for status lights, icons, or touch controls
• Restores a secure mounting surface and proper alignment for buttons or touch areas
• Helps resolve issues where the front panel is cracked, warped, or missing

• One display case assembly (housing) as shown

• Power off and unplug the appliance before starting any work to avoid shock
• Removal typically requires accessing the front control area and removing retaining screws or clips
• Handle the display area carefully to avoid scratching or damaging lens/finish

Conceals and protects the door hinge area on your refrigerator. Replace this cover if cracked, loose, or missing to restore a clean appearance.

Plastic cover that snaps over the freezer door hinge to conceal hardware and protect the hinge area. Replace if cracked, broken, or missing.

Not cooling properly? This refrigerator evaporator coil assembly absorbs heat to enable cooling. Restores proper temperature control in bottom-mount models.

Rear machinery compartment cover for bottom-mount refrigerators. Shields compressor and components at the back. Replace if cracked, broken, or missing.

Refrigerator roller wheel for leveling and mobility. Replaces worn, cracked, or broken rollers that prevent smooth movement or proper leveling.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Protective cover for the PTC start relay on your refrigerator compressor. Replace if cracked, broken, or missing to shield relay components from damage.

Fix refrigerator vibration and rattling noise with this compressor damper. Cushions the compressor to reduce metal-on-metal contact and wear.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Secures the drier assembly to the refrigerator frame. Replace if the clip is cracked, broken, or missing to restore stability and reduce movement.

Water pooling under your refrigerator? This drip pan catches defrost and condensation water, directing it to evaporate safely and prevent leaks.

If your refrigerator has uneven cooling or fan noise, the fan guide may be damaged. This part channels airflow properly and prevents blade rubbing.

Fixes warm or cool spots in your refrigerator. This fan guide assembly directs proper airflow in the compartment. Compatible with multiple models.

Fix uneven cooling or warm spots in your refrigerator with a new evaporator fan blade. This part circulates cold air throughout the unit for consistent temps.

The Fan and Grille Assembly is an OEM component designed for LG refrigerators. This assembly circulates air within the refrigerator compartment to maintain even cooling temperatures. 

Causes of a bad fan and grille assembly can include failure of motorized fan components over time, buildup of dust or debris restricting airflow, or physical damage to fan blades.

Symptoms of a bad fan and grille assembly include:  

• Development of warm spots within the fridge
• Excessive frost or ice buildup inside 
• Louder than normal operating sounds
• Inability to maintain proper temperature settings

Replace yours today with this genuine OEM LG assembly to restore optimized air circulation for balanced cooling. This replacement assembly is compatible with Kenmore, Frigidaire, and GE refrigerator models. Proper airflow is essential for energy efficiency and food freshness.

Can't adjust refrigerator temperatures or display not responding? This control board assembly manages temperature regulation and user interface functions.

If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.

Fix warm refrigerator or freezer temps with this evaporator fan motor assembly. Circulates cold air throughout compartments. Located behind freezer wall.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.

Replace your refrigerator's LED light strip to restore interior illumination. Install when lights are dim, flickering, or not working. Verify fit with model number.

Refrigerator won't power on or no electrical connection? This power cord assembly connects your refrigerator to the wall outlet. Direct plug-in part.

Fixes intermittent electrical issues or burnt wiring in your refrigerator. This harness assembly routes power between control and components safely.

Fixes refrigerator frost buildup and cooling issues. This defrost heater melts ice from evaporator coils. Moderate DIY repair, typically 1-2 hours.

Fix uneven cooling or noisy fan operation with a new circulation fan motor. This DC motor restores proper airflow across coils. Moderate DIY repair.

Control panel unresponsive or erratic? This protective cover shields your refrigerator's circuit board from moisture and debris. Straightforward install.

Fixes refrigerator not cooling, compressor not running, or complete power failure after outage. Main control board regulates all fridge functions. 24hr test.

Ice maker stopped producing ice or cycles too slowly? This complete ice maker assembly replaces a faulty unit. DIY-friendly installation in 10-15 minutes.

Structural bracket that secures internal components in your refrigerator. Replace if cracked, broken, or worn to restore proper alignment and stability.

Replace your refrigerator's water filter assembly when water tastes bad, flows slowly, or the filter indicator light activates. Direct fit replacement part.

Restores clean-tasting water and steady flow by filtering sediment and contaminants. Replace every 6 months or when flow weakens. Verify fit with your model.

Fix water dispenser leaks or no water flow from your refrigerator. This tube assembly replaces kinked or damaged water lines. Moderate DIY repair.

Ice maker not filling or water dispenser not working? This water inlet valve controls water flow to your refrigerator. Moderately difficult repair.

Rail connector for refrigerator shelves and drawers. Replace if cracked, broken, or missing to restore proper rail alignment and support functionality.

Small trim cap that covers exposed fasteners or access holes on your refrigerator. Replace if cracked, broken, or missing to restore finished appearance.

Tube cover for refrigerator water lines. Replaces cracked, broken, or missing covers that protect tubing connections. Installs over exposed tubes.

Refrigerator hose clamp band secures water lines and hoses. Replace if cracked, loose, or causing leaks. Verify fit with your model number before ordering.

Fix temperature fluctuations or inaccurate readings with this refrigerator sensor control board. Manages temperature sensors for proper cooling control.

Fix a refrigerator that won't cool, has display errors, or won't power on by replacing the power control board assembly. Moderate DIY repair restores function.

Freezer not cooling below 24°F or refrigerator running too warm? This defrost thermostat sensor monitors temperature and signals the control board.