Parts for Lg LRFXS2503D/00: Door Parts

Secure refrigerator panels, brackets, and internal components with this replacement mounting screw. Ideal for missing, stripped, or damaged fasteners.

Rear handle for refrigerator models. Installs on the back of the unit. Replace if your original handle is cracked, broken, or missing for proper access.

Replace your broken or cracked refrigerator door bin holder. This structural component secures door bins in place on bottom-mount refrigerators.

Replace your refrigerator's adjustable leveling leg assembly if cracked, broken, or missing. Installs at the base to level and stabilize your unit.

Connector link between refrigerator door and cabinet. Replace if original is broken, cracked, or worn. Essential for smooth door operation and alignment.

Rail guide assembly for bottom-mount refrigerator drawers. Installs on drawer slides to ensure smooth gliding. Replace if cracked, broken, or worn.

Plastic rail holder that secures shelf rails inside your refrigerator. Replace this component when cracked, broken, or missing to restore shelf stability.

Holder assembly for bottom-mount refrigerators. Replaces broken, cracked, or missing holder components. Secures internal parts in place.

Rail guide assembly secures and guides refrigerator drawers for smooth sliding. Replaces broken, cracked, or worn guides causing misalignment or sticking.

Replacement freezer drip tray that installs inside the freezer compartment to catch drips and keep the interior organized. Replaces cracked or missing trays.

Freezer drawer roller assembly for refrigerators. Installs on bottom drawer to enable smooth gliding. Replace if roller is cracked, broken, or worn.

Roller assembly for refrigerator freezer drawers. Replaces broken, cracked, or missing rollers that prevent smooth drawer gliding. Snaps into place.

Replaces the drawer liner tray that forms the structural shelf inside your refrigerator drawer. Needed when the original is cracked, warped, or broken.

Refrigerator drawer tray assembly that supports and guides sliding drawers. Replace if cracked, broken, warped, or missing to restore level storage space.

Replacement drawer tray assembly for bottom-mount refrigerators. Restores storage space when original is cracked, warped, or broken. Direct fit.

Wire shelf assembly for bottom-mount refrigerators. Installs inside fresh food compartment. Replace if shelf is cracked, bent, rusted, or missing.

Covers the retractable flex zone tray area in your refrigerator door. Replace if warped, cracked, or deformed from temperature changes or wear.

Microwave door won't close properly or wobbles? This rail holder secures the door rail assembly to restore smooth alignment and operation.

Replacement rail holder that secures sliding rails in your refrigerator. Installs on the frame to restore alignment. Needed when cracked or broken.

Fresh room tray assembly for bottom-mount refrigerators. Holds fruits and vegetables in dedicated storage compartment. Replace if cracked or broken.

Covers the flex zone adjustable tray area in your refrigerator door when retracted. Replace if warped, cracked, broken, or missing from temperature damage.

Decorative cover panel for bottom-mount refrigerators. Covers and conceals internal components for a finished look. Replace if cracked, broken, or missing.

This Vegetable Tray Assembly replaces a damaged or worn crisper pan to keep produce contained and stable in the refrigerator. It restores a clean, level surface for fruits and vegetables and helps maintain normal storage organization. What it does:

• Replaces cracked, warped, or broken crisper drawer pans that allow leaks or unstable storage
• Provides a smooth, easy-to-clean surface for storing fruits and vegetables
• Supports proper drawer alignment so the crisper slides in and out smoothly
• Helps prevent produce from sitting in spills or pooling liquids

• Disconnect power to the refrigerator or follow the manufacturer's safety guidance before servicing.
• Remove the existing crisper drawer and slide the tray into the drawer compartment, aligning rails and stops.
• Inspect drawer tracks and guides for damage; replace or clean as needed to ensure smooth operation.

A replacement vegetable tray assembly that holds produce in the refrigerator crisper area and restores proper storage support and airflow. Designed to fit into the factory crisper slot and keep fruits and vegetables organized. What it does:

• Replaces a cracked, warped, or missing crisper tray to restore stable storage for produce
• Supports the crisper drawer and helps maintain proper airflow around stored items
• Prevents direct contact between produce and the refrigerator floor, reducing bruising
• Fits into the existing crisper housing and works with the factory slide/rail system

• Installation is user-serviceable; remove crisper drawer and slide the tray into place on the rails
• Inspect surrounding rails and supports for damage before installing the new tray
• Use gentle pressure to seat the tray—do not force or bend the part
• Unplug refrigerator or disconnect power if removing components that expose electrical parts

Replaces cracked, broken or missing glass cover for the vegetable drawer in your bottom-mount refrigerator. Restores a clean appearance and protection.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Small stopper that fits inside the handle assembly to limit travel and keep the handle properly seated. Replace if worn, missing, or broken to restore secure feel.

Seals your refrigerator door to keep cold air in and prevent moisture buildup. Replace when torn, loose, or not sealing properly. Confirm fit with model.

Front plate assembly for bottom-mount refrigerators. Installs on the front panel to provide structural support and finished appearance. Replace if cracked, broken, or missing.

Drawer guide rail for bottom-mount refrigerators. Installs on the side of the drawer to provide smooth sliding. Replace if cracked, broken, or worn.

Replacement door basket for bottom-mount refrigerators. Installs on the interior door to organize and store items. Replace if cracked, broken, or missing.

Mounts inside the refrigerator door to hold condiments, bottles, and small items. Replace when original basket is cracked, broken, or won't stay seated.

Replace a broken or cracked refrigerator door basket that's causing items to fall or tip over. Restores convenient door storage in minutes.

Door stop assembly that controls refrigerator door movement and positioning. Replace if the original is cracked, broken, or missing to restore proper function.

Fix clicking doors or misaligned refrigerator doors with a new hinge cam. Restores smooth open/close action and proper door alignment. DIY-friendly repair.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.

Replace your refrigerator's broken, cracked, or worn door handle assembly. Restores proper grip and door operation. Direct fit for select models.

Slide rail for bottom-mount refrigerator freezer drawer. Replaces broken, binding, or worn rails that prevent drawer from opening or closing smoothly.

Slide rail for bottom-mount refrigerator freezer drawers. Replaces broken, cracked, or binding rails causing uneven drawer movement or closure issues.

Fixes intermittent cooling or component failures caused by loose or damaged wiring connections. This connector assembly restores secure electrical links.

Replace your refrigerator's center hinge assembly to fix sagging doors, uneven gaps, and alignment issues. Restores smooth operation and proper sealing.

Service spanner tool for refrigerator maintenance. Provides secure grip for loosening and tightening service fittings and retaining nuts. Replace if lost.

Secures and pivots the refrigerator door at the top. Replace this upper hinge assembly if it's cracked, broken, or causing misalignment issues.

Upper door hinge assembly supports your refrigerator door and ensures proper alignment. Replace if door sags, rubs, or won't seal. Verify fit with your model.

Replaces damaged duct vent cap assembly on your refrigerator. Install when cap is cracked, broken, or missing to restore proper airflow. Verify fit with your model number before ordering.

Not cooling properly? This refrigerator evaporator coil assembly absorbs heat to enable cooling. Restores proper temperature control in bottom-mount models.

Rear machinery compartment cover for bottom-mount refrigerators. Shields compressor and components at the back. Replace if cracked, broken, or missing.

Refrigerator roller wheel for leveling and mobility. Replaces worn, cracked, or broken rollers that prevent smooth movement or proper leveling.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Protective cover for the PTC start relay on your refrigerator compressor. Replace if cracked, broken, or missing to shield relay components from damage.

Fix refrigerator vibration and rattling noise with this compressor damper. Cushions the compressor to reduce metal-on-metal contact and wear.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Secures the drier assembly to the refrigerator frame. Replace if the clip is cracked, broken, or missing to restore stability and reduce movement.

Water pooling under your refrigerator? This drip pan catches defrost and condensation water, directing it to evaporate safely and prevent leaks.

If your refrigerator has uneven cooling or fan noise, the fan guide may be damaged. This part channels airflow properly and prevents blade rubbing.

Fixes warm or cool spots in your refrigerator. This fan guide assembly directs proper airflow in the compartment. Compatible with multiple models.

Fix uneven cooling or warm spots in your refrigerator with a new evaporator fan blade. This part circulates cold air throughout the unit for consistent temps.

Fix rattling noises and restore airflow with this fan grille assembly. Protects the evaporator fan from debris and helps maintain proper cooling circulation.

Can't adjust refrigerator temperatures or display not responding? This control board assembly manages temperature regulation and user interface functions.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Fix warm refrigerator or freezer temps with this evaporator fan motor assembly. Circulates cold air throughout compartments. Located behind freezer wall.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.

Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.

If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.

Excessive vibration or motor noise? This motor mounting bracket secures the motor to reduce vibration and maintain proper alignment in your refrigerator.

Is your refrigerator running warm or not cooling properly? This condenser fan motor circulates air to cool the compressor system. Direct replacement part.

Replace your refrigerator's LED light strip to restore interior illumination. Install when lights are dim, flickering, or not working. Verify fit with model number.

Refrigerator won't power on or no electrical connection? This power cord assembly connects your refrigerator to the wall outlet. Direct plug-in part.

Fixes refrigerator frost buildup and cooling issues. This defrost heater melts ice from evaporator coils. Moderate DIY repair, typically 1-2 hours.

Fix refrigerator not cooling or warm temperatures with this compressor sealing pipe. Seals refrigerant lines to maintain proper pressure and cooling.

Fix uneven cooling or noisy fan operation with a new circulation fan motor. This DC motor restores proper airflow across coils. Moderate DIY repair.

This cover assembly protects the appliance control PCB from dust, debris and accidental contact, helping maintain reliable control-board operation and reducing risk of shorting or physical damage. It's a direct-fit replacement designed for the OEM board layout. What it does

• Shields the printed circuit board from loose debris and splashes that can cause failures
• Prevents accidental contact with exposed components during service or use
• Helps maintain correct spacing and mounting for the control PCB
• Supports safer handling when accessing the control area

• One cover assembly for the control PCB

• Power off and disconnect the appliance before accessing the control area
• Remove only the fasteners required to access the PCB; install cover so mounting points align with board standoffs
• If screws, clips or adhesive pads are damaged, replace with OEM-approved fasteners for secure fit

Control panel unresponsive or erratic? This protective cover shields your refrigerator's circuit board from moisture and debris. Straightforward install.

Fix unresponsive controls, no start issues, or error codes in your bottom-mount refrigerator. This main PCB manages power and electronic functions.

Replace a cracked or broken ice dispenser assembly when ice won't dispense properly. Includes mounting hardware for external dispenser repair.

Ice won't dispense but ice maker works? The ice bucket assembly stores and moves ice to the dispenser. Includes auger mount. DIY-friendly replacement.

Fix a refrigerator that's not making ice with this ice maker assembly kit. Includes ice bin, ejection mechanism, and water guide for clear ice cubes.

Ice not dispensing or slow to fill? This auger motor controls ice movement from the icemaker to the dispenser. Fixes clumping and jamming issues.

Structural bracket that secures internal components in your refrigerator. Replace if cracked, broken, or worn to restore proper alignment and stability.

Replace your refrigerator's water filter assembly when water tastes bad, flows slowly, or the filter indicator light activates. Direct fit replacement part.

Restores clean-tasting water and steady flow by filtering sediment and contaminants. Replace every 6 months or when flow weakens. Verify fit with your model.

Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.

Leaking water line connections? This inline tube connector joins two sections of tubing for a secure, leak-resistant seal. Quick 10-minute fix.

Fix a leaking water dispenser or ice maker that won't fill with this refrigerator water inlet valve assembly. Restores proper water flow in 30 minutes.

Fix a refrigerator that won't dispense water or make ice with this water inlet valve assembly. Controls water flow to dispenser and ice maker. DIY-friendly.

Rail connector for refrigerator shelves and drawers. Replace if cracked, broken, or missing to restore proper rail alignment and support functionality.

Small trim cap that covers exposed fasteners or access holes on your refrigerator. Replace if cracked, broken, or missing to restore finished appearance.

Tube cover for refrigerator water lines. Replaces cracked, broken, or missing covers that protect tubing connections. Installs over exposed tubes.

Refrigerator hose clamp band secures water lines and hoses. Replace if cracked, loose, or causing leaks. Verify fit with your model number before ordering.

Fix a broken ice bucket door latch or cracked cover with this refrigerator ice bucket cover assembly. Restores proper ice storage and dispenser operation.

Front cover for refrigerator door bin. Replaces cracked, broken, or missing covers on bottom-mount and standard refrigerator door storage bins.

Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.

Freezer not cooling below 24°F or refrigerator running too warm? This defrost thermostat sensor monitors temperature and signals the control board.