Parts for Lg LRGL5825F/00: Door Parts

Binding head screw that fastens microwave panels and components. Replaces missing, stripped, or damaged screws to restore secure assembly and eliminate rattling.

Replace your range's worn or missing insulator. This thermal protection component installs between heating elements to prevent heat transfer damage.

Insulator for electric and gas ranges. Installs between internal components to provide heat or electrical protection. Replace if cracked or missing.

Replacement screw secures panels and components in your microwave. Install when original hardware is stripped, rusted, or missing to stop rattles.

Secures interior panels and components. Replace when stripped, corroded, or missing to stop rattles and secure loose trim. Verify fit with your model number.

Fix intermittent power issues or non-working features with this range wiring harness. Restores reliable connections between electrical components.

Wire harness for electric and gas ranges. Connects electrical components inside your range. Replace if wires are damaged, frayed, melted, or connections are loose.

Factory mounting screw secures brackets, covers, and internal assemblies in your range. Replaces missing, stripped, or damaged fasteners for proper fit.

Replacement washer that secures fasteners and distributes load at connection points in ranges and ovens. Needed when original is missing, worn, or damaged.

Secures panels, brackets, and internal components in your range. Replace this screw if the original is missing, stripped, or rusted for proper fit.

Customized screw secures panels, brackets, and small assemblies in ranges and ovens. Replace when original specialized fastener is missing or damaged.

Hardware washer that distributes fastener load and maintains proper spacing in your range. Replace if missing, worn, or damaged to restore secure mounting.

Secures the fan blade to the motor shaft in ranges and ovens. Replace if loosened from vibration, stripped threads, or missing to restore proper mounting.

Replacement mounting screw for range panels and components. Needed when original screw is stripped, lost, or damaged. Secures panels for stable operation.

Secures panels, brackets, and trim on your gas range. Replace this self-tapping fastener if it's missing, stripped, or damaged to restore alignment.

Mounting screw for range bake element assembly. Secures heating element to oven cavity. Replace if screw is stripped, missing, or corroded during repair.

Fix F11 error codes or slow heating with this gas range oven igniter. Solves no-heat issues and temperature problems. DIY repair takes under 1 hour.

Adjustable metal leveling foot that elevates and stabilizes your range. Mounts to the bottom of the unit. Replace if broken, worn, or missing.

Replaces cracked or dented outer door trim to restore your range's appearance and seal support. Replace when damaged to maintain proper door sealing. Confirm fit.

Replacement door handle for electric and gas ranges. Installs on the oven door to restore safe opening and closing. Replaces cracked, broken, or worn handles.

Replacement window glass for range oven doors. Restores clear viewing area when original glass is cracked, chipped, cloudy, or shattered. Installs inside door.

Replacement door assembly that restores proper closing and sealing. Replace if your door is damaged, bent, or won't seal correctly. Confirm fit with your model.

Replacement window glass for range oven doors. Restores clear viewing area when original glass is cracked, chipped, cloudy, or shattered. Installs inside door.

Handle support bracket for electric and gas ranges. Secures and stabilizes the oven door handle. Replace if cracked, broken, or missing to restore proper support.

Replace your range oven door hinge assembly when the door sags, binds, or won't close properly. Restores alignment and smooth operation. Verify fit with your model.

Support bracket for range oven door window glass. Secures and stabilizes the inner window panel. Replace if cracked, broken, or missing to restore door.

Fix display issues, unresponsive buttons, or oven lock problems on your gas range. This main control board coordinates all appliance functions. Moderate DIY.

Fixes refrigerator not powering on or functions not working. This main control board manages all refrigerator operations. Requires rear panel removal.

Door lock parts assembly for gas ranges. Replaces broken, jammed, or malfunctioning door lock mechanisms. Installs on oven door to secure during cleaning.

Replace a worn, cracked, or missing gas range control knob. Installs on the control panel to restore heat and function setting selection.

Replace a damaged motor cover causing excessive noise or debris buildup. This housing shields the motor assembly and maintains proper airflow. DIY-friendly.

Burner won't ignite or flame is uneven? This gas range burner base supports the burner cap and channels gas for consistent ignition and stable flames.

Control panel plate assembly for gas ranges. Replaces cracked, damaged, or discolored front panel. Covers control area for clean appearance.

Replace your range motor cover if the motor assembly is exposed or damaged. This protective housing shields internal components from dust and debris.

Replace your cracked, warped, or missing range oven rack. Installs inside the oven cavity to support cookware during baking, roasting, and broiling.

Fix rattling or misaligned range components with this fixing holder bracket. Secures internal parts to restore proper positioning and quiet operation.

Unresponsive buttons or blank display? This control panel assembly restores touchpad and display function on your gas range. Direct replacement part.

If your gas range buttons don't respond or selectors fail, this control switch assembly restores reliable operation. Mounts in the control panel area.

Replace your gas range grille assembly if burners are uneven, grates don't sit properly, or the grill is warped. Covers two burners. Easy DIY fix.

Front lower grille assembly for gas ranges. Replaces the cracked, broken, or missing front trim and vent cover to restore appearance and protect components.

Controls gas flow to your range burner. Replace this valve assembly when the original is faulty, leaking, or damaged to restore safe gas regulation.

If your range burners won't light or heat unevenly, the gas valve assembly may have failed. This part regulates gas flow to restore proper ignition.

Gas range won't ignite or heat properly? This valve assembly controls gas flow to your oven and burners. Restores ignition and safe operation.

Gas valve assembly that controls and delivers gas to the burner. Mounts inside the range cabinet. Replace if cracked, leaking, or damaged to restore safe gas flow.

Replace a gas range burner head with uneven flames, weak heat output, or clogged ports. Sits at the center of the burner unit to control flame pattern.

Fix uneven flames or yellow burner tips with this gas range burner cap. Spreads flame evenly across the burner surface. Simple 5-minute swap.

Replace a burner cap when flames are uneven, yellow, or won't stay lit. This cap distributes heat evenly across your cooktop. Simple 5-minute swap—no tools.

Burner cap sits over sealed burner units to direct flame upward. Replace if cracked, chipped, or damaged from wear. Lifts off easily for quick replacement.

If your gas burner flame is uneven or yellow, the burner cap may be warped or cracked. This component covers flame ports for proper heat distribution.

Fix intermittent power or control failures with this gas range cable assembly. Routes power between the control board and components to restore operation.

This rigid molded pipe assembly routes water or drainage inside the appliance to ensure proper flow and prevent leaks. Replace a cracked, clogged, or damaged tube to restore reliable water movement and reduce leaks. What it does:

• Channels water or condensate between internal components for normal operation
• Prevents leaks caused by cracked or split tubing
• Helps restore normal filling, dispensing, or draining when the original pipe is blocked or broken
• Fits where a single molded or formed pipe is required to maintain proper routing

• One rigid molded pipe assembly

• Disconnect power and shut off water supply before beginning repairs
• Inspect surrounding fittings and seals; replace any damaged clamps or gaskets
• Securely fasten both ends and check for leaks after reconnecting water

Replacement gas supply pipe for gas range burners. Connects gas valve to burner assembly. Order if your original pipe is damaged, corroded, or missing.

Fixes oven light staying on or not turning on when door opens. This oven door light switch controls interior lighting. Simple 15-minute repair.

Range won't turn on or has no power? This power cord assembly replaces damaged or worn main power cables, restoring electrical connection. Direct fit.

Fix uneven baking or F2 E0 error codes with a new convection fan motor. Restores air circulation for consistent oven temperatures. Moderate DIY.

If your oven won't reach the right temperature or shows an F9 error, the temperature sensor may be faulty. Simple DIY repair in under 45 minutes.

Replace a damaged or corroded wire harness in your range. This single-connection harness restores proper electrical connections when original wiring is frayed, melted, or broken.

Secures the control panel to your range cabinet. Replace if the bracket is cracked, bent, stripped, or hardware no longer holds the console firmly in place.

Fixes uneven baking and noisy oven operation. This convection fan assembly circulates hot air for consistent cooking. Moderate DIY repair restores airflow.

Fixes loose components or electrical shorts caused by worn insulation. This mounting insulator secures internal parts and prevents vibration in gas ranges.

Insulator for gas range burners. Installs beneath burner components to provide heat protection. Replace if cracked, broken, or missing for proper operation.

Replace your damaged or broken range handle bar. This bar installs on the oven door, providing a secure grip for opening and closing. Order now.

Motor loose or vibrating excessively? This motor bracket secures the motor to the chassis, reducing vibration and maintaining alignment for quieter operation.

Halogen oven light bulb illuminates your range interior for monitoring food while cooking. Replace when bulb burns out or flickers. Verify fit with your model.

This hinge bracket secures the oven door hinge mechanism on your range. Replace if the bracket is cracked, broken, bent, or missing to restore door support.

Seals your range door to maintain stable temperatures and prevent air leaks. Replace when worn, cracked, or no longer creating an airtight seal.

Fix F11 error codes or slow heating with this gas range oven igniter. Solves no-heat issues and temperature problems. DIY repair takes under 1 hour.

Replace leaking or damaged gas range pipe tubing to restore proper fuel flow and prevent gas leaks. Direct-fit replacement part for reliable operation.

Gas pipe that connects the gas supply to the burner assembly in your gas range. Replace if the pipe is cracked, corroded, or leaking to restore safe operation.

If your gas range dispenser isn't working or you notice water leaks, this water line pipe restores proper flow from inlet to dispenser and ice maker.

Burner nozzle holder for gas ranges. Secures the gas nozzle in place on the burner assembly. Replace if cracked, broken, or missing to restore proper fit.

Fix inadequate or uneven broiling in your gas range with this broil burner orifice holder assembly. Restores proper heat distribution for cooking.

Fixes weak or uneven flames on gas range burners. This burner nozzle regulates gas flow for proper flame height. Simple DIY fix, takes 15 minutes.

Burner won't light or has uneven flames? This gas range burner assembly includes the ignition electrode, valve stem, and burner head for proper operation.

Fix a burner that won't light or heat unevenly with this gas range burner assembly. Common repair for weak or inconsistent flames on cooktop surfaces.

Fix weak or uneven flames with this gas range burner assembly. Complete replacement component restores proper ignition and heating performance.

Fix a gas range burner that won't light, has weak flames, or uneven heating. This burner assembly restores proper flame distribution. Moderate DIY repair.

Fix a gas range burner that won't light or has weak flames with this burner assembly. Moderate DIY repair typically completed in under an hour.

If your gas range burner won't light or has uneven flames, this burner assembly restores proper heating. Direct replacement part with moderate difficulty.

Pressure regulator assembly for gas ranges. Mounts to the gas supply line to control fuel pressure. Replace if cracked, leaking, or damaged.

Structural base that supports and secures the range cabinet and internal components. Replace if cracked, broken, or damaged to restore stability and alignment.

Fix a burner that won't ignite or heat evenly with this surface burner assembly. Restores consistent flame and reliable heat to your gas range cooktop.

Fixing frame that secures internal components in your range. Replace if your original frame is bent, cracked, or broken to properly mount parts inside the unit.

Outer front panel that restores your range's appearance. Replaces cracked, dented, or discolored original panel. Installs on the front exterior.

Rubber foot pad that supports and stabilizes your range on the floor. Replace if cracked, broken, worn, or missing to keep your appliance level.

Secures your range to the floor or wall to prevent tipping hazards. Replace if damaged or during installation. Verify compatibility with your model.

Storage drawer for electric and gas ranges. Installs at the bottom of your range for kitchen utensil storage. Replace if cracked, broken, or missing.

Range storage drawer rail guide directs adjustable drawer movement in and out of position. Replace if clips are broken, warped from heat, or damaged.

Fix an oven that won't heat or gives F9 error code. This gas valve regulates gas flow to burners. Moderate DIY repair requiring basic tools.

Mounting anchor for range door handles. Replaces worn, broken, or missing anchors to restore secure handle attachment and eliminate wobbling or loose fit.

Replace a missing or damaged gas range accessory assembly to restore proper fit, alignment, and securement of related components during installation.