Parts for Maytag MRT311FFFZ00: 04 - Door Parts

This door trim is the molded finishing frame for the appliance door. Replacing a cracked, warped, or missing trim restores a clean look and helps keep door components properly aligned for a secure fit.

• Finishes the door edge and conceals gaps or fasteners for a clean appearance
• Depending on model, helps retain the outer panel or glass window
• Helps maintain proper alignment and feel of the door assembly
• Common symptoms: cracked/chipped trim, loose or rattling piece, gaps or sharp edges, cosmetic damage

• Disconnect power before servicing; shut off gas/water if applicable
• Protect the door and any glass; support the door if removal is required
• Transfer any clips, seals, or screws from the old trim; match the original orientation
• Secure the trim without overtightening and verify smooth door closing/latch alignment

Color: Grey

Color: Black

The Hinge-Sleeve Hole Plug is an OEM part for Whirlpool refrigerators. It is designed to cover the hinge sleeve holes on the refrigerator door, providing a finished look and protecting the internal components from dust and debris.

Common causes of a bad hinge-sleeve hole plug include physical damage during routine maintenance or accidental impacts. A missing or damaged plug can lead to exposure of internal hinge components, potentially causing further damage over time.

Symptoms of a bad hinge-sleeve hole plug include:

• Visible gaps or holes in the refrigerator door hinge area
• Accumulation of dust or debris in the hinge mechanism
• Loose or unstable refrigerator door hinges

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Endcap is an OEM part for Whirlpool refrigerators. It serves as a component for the interior shelving system, providing support and stability to the shelves that hold food and beverages.  

Causes of a bad endcap can include physical damage from overloading shelves, accidental breakage, or normal wear and tear over time. These scenarios can lead to the endcap becoming cracked, broken, or otherwise unable to properly support the shelf, potentially leading to the shelf collapsing or not being able to hold items securely.

Symptoms of a bad Endcap include:

• Shelves that sag or fail to stay level
• Difficulty in sliding shelves in or out
• Visible cracks or breaks in the endcap
• Loose or unstable shelves due to poor endcap support

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Door Gasket is an OEM part for Whirlpool refrigerators. This gasket forms an important seal around the refrigerator door, preventing warm air from entering the sealed interior compartment. Maintaining proper temperature and humidity levels inside depends on an intact, well-sealed door gasket.

Causes of a bad door gasket can include cracks, tears or deterioration over time due to exposure and normal compression/expansion cycles. Food particles or debris trapped against the gasket can also damage sealing integrity.

Symptoms of a bad door gasket include:

• Difficulty closing or sealing the door properly
• Higher electric bills from the refrigerator running more often
• Warm air leaking into the refrigerator sections
• Loss of interior temperature regulation

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This white door shelf trim is the front retainer for a refrigerator door shelf. It replaces a broken or missing rail to restore a secure edge that helps keep bottles and jars from sliding out. What it does:

• Acts as the front rail that snaps into the door liner to retain items on the shelf
• Helps prevent items from falling when the door is opened or closed
• Replaces cracked, warped, loose, or missing trim/end caps
• Common symptoms: broken or missing bar, trim won't stay seated, items fall from the door shelf

• One white door shelf trim with end caps

• Disconnect power and remove items from the affected door shelf before starting
• Gently release the old trim/end caps from the liner tabs—avoid prying directly on the door liner
• Align the new trim with the slots and snap/slide firmly into place until secure
• If plastic is cold/brittle, allow it to warm to room temperature and handle carefully

This replacement name plate restores the appliance's identification label so model and serial information is legible and the exterior looks complete. It's a simple cosmetic and identification part that helps owners read key appliance info. What it does

• Replaces a faded, damaged, or missing identification label
• Restores readable model/serial/manufacturer details for service and registration
• Improves cosmetic appearance where the original label is worn or peeled
• Helps prevent confusion when ordering parts or scheduling repairs

• One replacement name plate

• Clean and dry the mounting surface thoroughly before installing
• Align carefully and press firmly if adhesive-backed; use the original fasteners if applicable
• Handle by the edges to avoid transferring oils or smudges to the label

The Door Shelf Bin is an OEM part for Whirlpool refrigerators, designed to offer convenient storage space on the inside of the refrigerator door. This bin attaches to the door, providing an accessible place to store condiments, bottles, and other small items, maximizing the available space within your refrigerator. 

Causes of damage to the door shelf bin often include overloading with heavy items, impact from items being moved in and out of the refrigerator, or degradation over time due to the accumulation of moisture and exposure to temperature fluctuations. 

Symptoms of a bad Door Shelf Bin include:

• Cracks or breaks in the plastic
• Discoloration or warping, which can be caused by exposure to extreme temperatures or cleaning chemicals.
• Difficulty fitting into its designated slot on the refrigerator door

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This is a refrigerator door compartment bin. It provides organized storage on the door for condiments, jars, and small items, helping keep frequently used items within easy reach and preventing spills.

• Holds items on the refrigerator door and helps prevent tipping or sliding
• Replaces a cracked, loose, or missing door bin
• Common symptoms include items falling from the door, poor organization, or a bin that won't stay seated

• Unplug the refrigerator and remove contents from the old bin before replacement
• Lift the old bin straight up to release from the side rails; align and press the new bin into place
• Do not overload the bin; ensure a secure fit on the door rails
• Handle plastic parts carefully to avoid cracking

This door handle thimble is a small spacer/bushing used on select refrigerator and freezer doors. It sets the correct stand-off for the handle hardware so the handle mounts securely, aligns properly, and feels solid in use.

• Spaces and aligns the door handle to the correct distance from the door
• Supports the handle mounting stud/screw for a secure fit
• Helps reduce handle wobble, gaps, or scuffing against the door
• Replace if the handle won't tighten evenly or the original thimble is cracked, worn, or missing

• Disconnect power before servicing the appliance
• Support the handle to protect the door finish during removal
• Loosen the handle's set screw(s) or mounting bolt, remove the old thimble, and clean the area
• Seat the new thimble fully, reinstall hardware, and tighten evenly—do not overtighten

Color: White

The Freezer Door Gasket (Black) is an OEM part for Whirlpool refrigerators. This part ensures an airtight seal around the freezer door. This gasket prevents warm air from entering and cold air from escaping the freezer compartment, playing a crucial role in maintaining the freezer's internal temperature. The gasket measures approximately 20.19” x 31.29”.

Causes of a bad Freezer Door Gasket can include natural aging and wear over time, exposure to extreme temperatures that can degrade the material, and physical damage from cleaning or heavy use.

Symptoms of a bad Freezer Door Gasket include:

• Visible cracks, tears, or wear in the gasket, leading to poor sealing
• Condensation or ice buildup around the door edges, indicating air leaks
• Difficulty in maintaining the freezer's set temperature, resulting in increased energy consumption
• The freezer door not closing properly or feeling less resistant to opening

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement screw secures panels, brackets, or trim within your appliance. Replacing a worn, stripped, or missing screw restores a tight, rattle-free fit so components stay aligned and operate as intended. What it does:

• Fastens components at the original factory locations specified for this part
• Replaces missing, damaged, or stripped screws to restore holding power
• Helps reduce vibration and rattling from loose parts
• Maintains proper alignment of panels, covers, brackets, and trim

• Disconnect power (and gas, if applicable) before servicing
• Match to the original screw and install in the same location and orientation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver or nut-driver; transfer any washers or spacers from the original hardware if present

The Bracket-Door Stop is an OEM replacement part for Whirlpool appliances. This zinc-finished bracket is designed to prevent the appliance door from opening beyond its intended range, protecting both the door and surrounding components from potential damage. It ensures the door stays secure and functions smoothly during regular use.

Symptoms of a bad Bracket-Door Stop include:

• The door overextending when opened
• Difficulty in maintaining the door's position
• Visible bending, cracking, or damage to the bracket

Causes of a failing Bracket-Door Stop can include repeated stress from excessive force when opening the door, normal wear over time, or accidental impacts. A damaged bracket can compromise the door's alignment and overall functionality.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Screw is an OEM part for Whirlpool refrigerators, designed to secure components of the ice maker assembly. This screw maintains the structural integrity of the ice maker, ensuring that all parts are tightly fastened to prevent malfunction or inefficiency in ice production. 

Causes of failure can include stripping of the screw threads through over-tightening or corrosion, leading to a less secure fit.

Symptoms of a bad Screw include:

• Loose or dislodged components within the ice maker assembly.
• Inconsistent or halted ice production due to components shifting.
• Unusual noises emanating from the ice maker as a result of loose parts.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This manifold is the dishwasher's internal water feed tube that channels wash water from the pump to the upper spray levels. Replace a cracked, clogged, or leaking manifold to restore proper spray pressure and consistent cleaning performance.

• Routes wash water from the pump to mid/upper spray arms for full-rack coverage
• Helps maintain water pressure and flow to the upper spray zones
• Common symptoms of a failed manifold: weak or no spray on the upper rack, poor cleaning results, or leaks from the rear feed area

• Disconnect power and water supply before servicing
• Open the door and remove rack(s) as needed to access the rear feed tube
• Release locking tabs/clips, remove the old manifold, and fully seat the new one until it locks in place
• Run a short cycle to check for leaks