Parts for Maytag MRT711SMFZ02: Door Parts

This genuine OEM replacement door handle restores a secure grip and the original look to your refrigerator door. It replaces a cracked, loose or missing handle so the door opens and closes reliably. What it does

• Replaces a broken, cracked or worn refrigerator door handle
• Provides a solid, comfortable grip for opening and closing the door
• Restores proper door operation when a damaged handle interferes with use
• Improves appliance appearance by replacing a scuffed or faded handle

• One refrigerator door handle

• Follow the manufacturer's instructions; support the door while removing or installing the handle
• Use basic hand tools and avoid overtightening fasteners to prevent damage
• Wear gloves to protect hands from sharp edges during installation
• Unplug the appliance or cut power if removal requires working near electrical components

The Screw (Shoulder Bolt) is an OEM part for Whirlpool refrigerators. This part secures the refrigerator handle to the door, ensuring it remains firmly attached and functions correctly. The shoulder design of the bolt allows for proper spacing and alignment of the handle, providing stability and ease of use.

Causes of a bad handle screw can include regular wear and tear, over-tightening, or accidental damage during use or maintenance.

Symptoms of a bad handle screw include:

• Loose or wobbly refrigerator handle
• Handle detaching from the door
• Difficulty opening or closing the refrigerator
• Visible damage or wear on the screw

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This door trim is the outer decorative and protective ring that fits around the appliance door opening to restore appearance and help keep the door edge finished. Replace damaged trim to improve the door's look and protect the door edge. What it does

• Covers and protects the outer edge of the door for a finished appearance
• Replaces cracked, dented, or scuffed trim that detracts from the appliance
• Helps maintain a flush fit and reduces the chance of debris catching on the door edge
• Useful when door trim is bent or broken from impact or wear

• One door trim piece as shown

• Disconnect power (and gas if applicable) before starting any repair
• Remove the door from the appliance per the service manual to access trim fasteners
• Use appropriate trim/fastener tools to avoid damaging the new part or surrounding finish

This replacement name plate restores the appliance's identification label so model and serial information is legible and the exterior looks complete. It's a simple cosmetic and identification part that helps owners read key appliance info. What it does

• Replaces a faded, damaged, or missing identification label
• Restores readable model/serial/manufacturer details for service and registration
• Improves cosmetic appearance where the original label is worn or peeled
• Helps prevent confusion when ordering parts or scheduling repairs

• One replacement name plate

• Clean and dry the mounting surface thoroughly before installing
• Align carefully and press firmly if adhesive-backed; use the original fasteners if applicable
• Handle by the edges to avoid transferring oils or smudges to the label

This large door bin restores sturdy, easy-access storage on your refrigerator door. Replace a cracked or missing bin to keep condiments and bottles organized, prevent tip-overs, and free up space on the main shelves.

• Holds jars, condiments, and beverages on the door to maximize shelf space
• Replaces bins that are cracked, warped, loose, or missing
• Snaps into the designated large-bin positions for your model
• Helps prevent tipping and spills when opening and closing the door

• Unplug the appliance or disconnect power; remove items from the door
• Align the bin's tabs/hooks with the slots on the door liner
• Lower/slide into place until fully seated—do not force
• The bin is locked in before loading items

Color: Grey

Color: Black

This replacement screw secures panels, brackets, or trim within your appliance. Replacing a worn, stripped, or missing screw restores a tight, rattle-free fit so components stay aligned and operate as intended. What it does:

• Fastens components at the original factory locations specified for this part
• Replaces missing, damaged, or stripped screws to restore holding power
• Helps reduce vibration and rattling from loose parts
• Maintains proper alignment of panels, covers, brackets, and trim

• Disconnect power (and gas, if applicable) before servicing
• Match to the original screw and install in the same location and orientation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver or nut-driver; transfer any washers or spacers from the original hardware if present

The Bracket-Door Stop is an OEM replacement part for Whirlpool appliances. This zinc-finished bracket is designed to prevent the appliance door from opening beyond its intended range, protecting both the door and surrounding components from potential damage. It ensures the door stays secure and functions smoothly during regular use.

Symptoms of a bad Bracket-Door Stop include:

• The door overextending when opened
• Difficulty in maintaining the door's position
• Visible bending, cracking, or damage to the bracket

Causes of a failing Bracket-Door Stop can include repeated stress from excessive force when opening the door, normal wear over time, or accidental impacts. A damaged bracket can compromise the door's alignment and overall functionality.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Grey

This replacement handle end cap secures and finishes the end of a door handle. It restores a tight, clean look when the original cap is cracked, stripped, or missing and helps keep the handle firmly attached.

• Anchors and covers the mounting point at the end of the handle
• Helps maintain handle alignment and a solid feel in daily use
• Common fix for a loose or wobbly handle, broken/missing cap, or cosmetic damage
• Resolve gaps at the end of the handle or rattling during use

• Disconnect power to the appliance before servicing
• Support the handle while loosening/removing existing fastener(s) to prevent drops or door damage
• Transfer/reuse any set screw or fastener from the original as required
• Align the new end cap and secure fasteners snugly—do not overtighten

This factory-assembled door unit replaces a damaged or hard-to-close door, restoring proper fit, alignment, and appearance. It's built to match the original, helping the appliance open and close smoothly and operate as designed.

• Forms the complete door structure for the appliance
• Aligns on the hinges for smooth, consistent opening and closing
• Helps ensure proper closure for performance and safety
• Replace if the door is cracked, dented, warped, loose, or won't close/seal correctly

• Disconnect power at the breaker before servicing
• Support the door during removal/installation; large doors can be heavy and awkward
• Transfer any model-specific hardware or trim from the original door as required
• After installation, adjust hinges if needed

The French Door Bin is an OEM part for Whirlpool refrigerators. This durable bin attaches to the inside of the refrigerator door, offering convenient access to frequently used items such as drinks, condiments, and snacks. 

Causes of a bad French Door Bin can include overloading beyond its weight capacity, impact from items being moved in and out of the refrigerator, or degradation of the material over time due to the cold environment and frequent use.

Symptoms of a malfunctioning French Door Bin include:

• Cracks or breaks in the bin that prevent it from holding items securely
• Difficulty attaching or detaching the bin from the refrigerator door
• The bin sagging or not sitting flush against the door, indicating potential damage or wear

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This door trim is the finishing piece that frames the appliance door, concealing fasteners and protecting exposed edges. Replacing a damaged trim restores a clean appearance and helps keep door components properly secured as designed.

• Provides a finished border around the door and covers mounting hardware
• Helps protect door edges from chips, cracks, and sharp exposure
• Aids in retaining adjoining parts (panels, glass, nameplate) per design
• Common signs of wear: cracked or missing trim, loose fit, rattling, visible gaps, cosmetic damage

• Disconnect power to the appliance before servicing; allow any hot surfaces to cool
• Wear cut-resistant gloves—sheet metal edges can be sharp
• Remove the door if required, then remove screws/clips to release the old trim; transfer any reusable hardware from the original assembly
• Align and secure the new trim without overtightening to avoid damage

This snap bushing installs in a door panel opening to protect and guide wiring or tubing that passes through. Replacing a worn or missing bushing helps prevent chafing and pinching, supporting smooth, reliable operation. What it does:

• Snaps into the door panel hole to create a smooth pass-through
• Shields wiring harness or tubing from sharp edges and vibration
• Helps prevent pinched wires, damaged insulation, or leaks due to abrasion
• Common signs include a cracked/missing bushing, chafed wiring/tubing at the door pass-through, or rubbing noises when opening/closing

• 1 snap bushing

• Disconnect power; shut off water supply if applicable
• Depress the old bushing's locking tabs and remove from the door panel opening
• Route the harness/tubing through the new bushing; align and press until it snaps fully into place
• Verify nothing is pinched and restore power/water