Parts for Husqvarna 96145001500: Drive Control / Gearcase / Wheels Parts

This is a transmission designed for use with lawn mowers with a self-propel feature. The transmission is used to take power in the engine and move it to the wheels. It also controls the torque to manage the lawn mower's speed based on current conditions. If the transmission is damaged or worn, the pulley may continue spinning while the wheels refuse to turn.Several tools are needed for the replacement, including pliers, a drill, a nut driver, a socket wrench set, and work gloves. First, make sure the spark plug wire is disconnected. Remove the fuel tank cover, place a bag over the opening, and replace the cap. Remove the driver cover before releasing the ground drive belt from the pulley. Release the drive control cable from the post and take off the front wheels. Access and remove the transmission. Install the new part in the same location and reassemble.This is an authentic OEM Husqvarna transmission that is sold on an individual basis. It is compatible with lawn mowers and lawn tractors made by Husqvarna and Craftsman. The part comes with all needed axles and gears.

This genuine Husqvarna replacement part is a zinc coated 22 inch drive belt for use with all wheel drive lawn mowers. It is also called a mower belt or a ground drive belt.A properly functioning drive belt is essential for the safe and reliable use of a lawn mower. The drive belt connects the engine crankshaft to the transaxle pulley. This provides the power to turn the wheels of the mower. If the mower is moving slowly, it may be a result of the drive belt slipping. The drive belt may become worn out or frayed through extended use, requiring a replacement. Remember to check the drive belt periodically to spot any wear or damage. This part is an identical replacement for a drive belt that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. Please note: original part number 580364602 is now obsolete, and manufacturer has replaced the original part number with this part.

This is a transmission that is intended for use with lawnmowers. A transmission rotates the axle to drive the wheels so that the lawnmower can move. The drive cable component pushes the transmission forward so that it engages the drive belt and spins the transmission pulley when the operator pulls the drive lever up. A new transmission may be needed if the transmission is locked up or if it won't drive the wheels when it is engaged. If, upon visual inspection, it is determined that the transmission is cracked, broken, or damaged in any way, it will need to be replaced if it is affecting the performance of the lawnmower unit. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This transmission is a genuine OEM Husqvarna part. It is sold individually. This particular transmission is compatible with lawnmowers that are manufactured by Husqvarna and Jonsered.

This replacement part is a pulley drive assembly. This is a genuine replacement part made by Husqvarna. Pulley drive assemblies are commonly found in different types of lawnmowers and are able to establish a connection between certain parts. These parts are then able to work together to ensure that everything is working properly. A new pulley drive assembly might be needed if the current one is damaged or not operating properly. Due to the nature of the pulley's job, it can easily become worn down over time and need to be replaced. If the user hears unusual noises coming from inside the engine it can be due to a pulley. Be sure the engine is shut down before replacing this part. This pulley drive assembly is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This is a genuine replacement height adjuster that is made for use with lawn tractors. The height adjuster is the part of the unit that is used to adjust the cutting height of the machine. This works by using the lever to make an adjustment, which then lowers or raises the cutting deck. In the event the height adjuster fails, it will be necessary for a replacement to be made to get the machine operable again. This OEM height adjuster is made to exact standards and designed for select models from Husqvarna. It is made from durable metal and provides an exact fit. Several tools will be required for the installation of this height adjuster.This durable component is sold as an individual piece and does not include any hardware or additional parts. Those will require a separate purchase. Gloves should be worn to protect the hands and the power should be disengaged before working on any parts of the lawn mower. Allow the engine to cool completely, as well.

This is a genuine OEM left front wheel adjuster kit that is sourced directly from the manufacturer. It is designed for use on lawn mowers and lawn tractors. The front wheel adjuster is responsible for the cutting height of the blades. The part is moved up or down to set the height for the desired lawn length. Over time, the part may become worn and will need to be replaced. If the wheel will not turn or the cutting pattern is not level, the wheel adjuster could be the cause. If the adjuster doesn't engage, it will need to be replaced.A nut driver and screwdriver are required to remove and replace this part. Removal and replacement is a relatively simple task that takes less than half an hour. Remove the spark plug before working on the machine to prevent accidental powering. Remove the old unit and install the new one. This kit is the left side front wheel adjuster. The right side wheel adjuster is sold separately. This left front wheel adjuster kit is made of metal; it is sold as a pre-assembled individual unit. This left front wheel adjuster kit is compatible with lawn tractors and lawnmowers manufactured by Craftsman, Husqvarna, and Poulan.

This genuine Husqvarna selector knob affixes to the selector spring as part of a mechanism that lowers and raises the handle of the lawn mower for flexible usage.The selector knob might have to be replaced in the event that it suffers damage that impedes its ability to lower and raise the handles of the lawn mower. This kind of damage can occur as a result of general wear and tear from long-term usage, exposure to the elements, or a direct collision that warps the selector knob beyond repair. If any of this form of damage occurs and prevents the adjustability of the handles, the selector knob should be replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This selector knob is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman.

This replacement part is a bolt and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A bolt is a small but important part in many tools. These parts are able to hold different areas of machinery together so that the different areas of the device stay secure and steady. A new bolt might be needed if the current ones are missing or damaged. If parts on the appliance are falling off or are loose, the user should look into replacing a bolt. To replace a bolt or many bolts, the user must have access to common household tools. Simply remove the old one and use a screwdriver to replace it with a new part. Reference the specific user manual for further directions. This bolt is sold individually and is an OEM replacement part. Note that some devices require more than one screw so be sure to purchase the correct amount.

This part is a replacement drive bracket. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective drive bracket in a variety of lawn tractor models. This drive bracket holds critical parts of the engine into place to prevent them from moving around, creating friction or becoming loose. If the drive bracket is broken or defective, it should be replaced as soon as possible. t's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this drive bracket, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this drive bracket is suitable for use on several different models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please This is a genuine part made of high-quality, durable metal and is sold individually.

A lawnmower, weed whacker, or trimmer is exposed to a lot of flying debris, and this puts many parts at risk of becoming clogged with grass and other materials. This cover is designed to prevent any debris from reaching the interior of the wheel or the axle. If a large amount of grass or clippings accumulate inside of the assembly, the machine will be almost impossible to move forward - whether self-propelled or manually operated. This cover prevents that from occurring and simply kicks it back in the direction it came. It does take a lot of wear and tear. Installing it is extremely easy and requires little more than a wrench. Even if the cover is aged, or broken, it will remove easily and take minutes to replace. Expect to replace this at least once over the average lifespan of a trimmer. This works with Husqvarna, Poulan, Craftsman, Ariens, Weed Eater, Jonsered, and Murray makes and models. It is a genuine OEM part sold individually.

This pawl drive is a genuine Husqvarna part, sold individually. This pawl drive can be used as a replacement part in lawn mowers and chainsaws. This pawl drive is made out of durable metal. A pawl drive might have to be replaced within the standard lifespan of a lawn mower or a chainsaw. A pawl drive could suffer damage as a result of general long-term usage or from a direct collision with a falling object or a hard surface; this damage could come in the form of puncturing, erosion to the metal material, or warping the part beyond repair. If this is the case, the pawl drive should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This Pawl drive is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, Weed Eater, and Ariens.

This strong plastic wheel assembly can be used on many Husqvarna lawnmowers. It is the rear drive wheel that is driven using the lawnmower transmission assembly. The wheel assembly ensures the lawnmower can quickly and easily move across a lawn or garden. When used regularly, the wheel assembly can become damaged and may need to be replaced. Using the lawnmower without two functioning rear wheels will cause serious damage to the mower.A socket set is needed to replace the wheel assembly on a mower. A 9/16 socket can be used to remove the rear wheel. Before doing so, make sure the lawnmower is on a stable surface and the spark plug wire has been disconnected. Once the old wheel is removed, the new wheel can be replaced on the same socket. Replace the spark plug wire before use.This is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold as an individual part. The wheel assembly is made for use with several models of lawnmowers from Husqvarna.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This O-ring is an OEM part sourced directly from the manufacturer, and it is sold individually. The manufacturer of this product is MTD. An O-ring is a small but important piece of hardware. It is designed for use with outdoor lawn and garden equipment including lawnmowers and string trimmers. It is compatible with products made by the following brands: Craftsman, Husqvarna, Weed Eater, Ryobi, Poulan, Murray, and Ariens.The design and purpose of the O-ring is relatively self-explanatory. It is an “O” shaped ring of material which is used as a gasket. It is designed to sit within a groove and be compressed during assembly. The reason for this is to create a perfect seal that blocks the path of liquids or gases from escaping or flowing into regions of the machine where they are not supposed to be.Replacing a damaged O-ring is crucial if the equipment is struggling to start. After checking the air filter cover, removing the carburetor, and cleaning it thoroughly, the next step is to replace the O-rings, carburetor gasket, and air filter, followed by the spark plug. Regular maintenance of the carburetor and routine evaluation of the suitability of the O-ring is essential to proper mechanical maintenance. This O-ring is made out of neoprene.

This genuine Husqvarna pulley can be used as a replacement part for lawn mowers. The pulley is a component on which a rope is coiled while attached to the belt drive; the function of the pulley is to move along with the belt drive, which maintains the rotation of the belt drive and keeps the lawn mower steering and operating.If the belt drive of the lawn mower is not working properly or is frequently slipping, this could be a symptom of a damaged pulley. Additionally, if the engine is stalling or misfiring frequently, this could be attributed to a broken pulley. If the pulley is damaged, it should be removed and replaced immediately with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This pulley is compatible with Husqvarna brand lawn mowers.

This spring is a genuine Husqvarna part, sold individually. This spring can be used as a replacement part in a lawn mower. This part secures various internal components while allowing for some flexibility in placement. The spring in a lawn mower might have to be replaced if it can no longer secure internal components.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.