Parts for Echo PE-200 (05001001-05999999): Fan Case / Clutch - Pe-200, 201 Parts

Hex head bolt for edgers. Secures housing and internal components. Replace if bolt is stripped, corroded, missing, or no longer holds parts firmly.

This genuine Echo ignition switch can be used as a replacement part for string trimmers, hedge trimmers, leaf blowers, leaf vacuums, and edgers. The function of an ignition switch in outdoor appliances is to turn on the engine by connecting to the spark plugs and firing them up in order to power the engine.An ignition switch can be worn down over time by overuse or exposure to the elements. An ignition switch can also be damaged by a direct impact collision that can warp the component. It may also suffer from corrosion to the metal or plastic material that can prevent it from sending voltage and creating a spark to power on the engine. If this form of damage occurs, the ignition switch should be removed and replaced with this genuine OEM part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This ignition switch is compatible with the following brands: Echo and Shindaiwa.

This is a clutch assembly specifically made for handheld Echo lawn and garden equipment. It uses centrifugal force to bring together two concentric shafts. This clutch assembly is high-quality, but performance should be monitored to determine when the part needs to be repaired or replaced. When replacing the clutch assembly, the first step is to turn off the power on the machine and place it on a flat surface. Remove the bolts that attach the head to the shaft to offer better access to the head of the trimmer or pruner. Next, take out the throttle cable and remove the screws holding the front cover to reach the clutch. A screwdriver can be wedged between the casing and fan to remove the clutch using a pair of vice grips. The new clutch can be installed using the same steps in reverse.This clutch assembly is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual item. The part can be used with Echo string trimmers, pole pruners, hedge trimmers, and pruners.

Clear yellow fuel return tube that connects the fuel tank to the carburetor on edgers and trimmers. Replace if cracked, brittle, or leaking fuel.

Connected to the fuel vent tube, this fuel tank vent is necessary for proper fuel flow. Without this part, gas might leak out and cause damage. The vent allows air into the tank but will keep gas from coming out. This part enables the tank to breathe and helps relieve vacuum and pressure. It might be a challenge to identify if the fuel tank vent is damaged. Finding an air leak isn't easy, but a machine that demands more fuel may signal such a case. The installation of this part must be done in a well-ventilated area. Do not begin the repair without draining the existing fuel from the tank and disconnecting the spark plug wire. This fuel tank vent is a genuine OEM product sourced directly from the manufacturer and comes as an individual part. It can be used on many lawn maintenance items, including chainsaws, hedge trimmers, power blowers, power pruners, and edgers. It is compatible with models from Echo, Mantis, and Shindaiwa.

Fix fuel odors or leaks with a new fuel line. This durable rubber pipe connects your tank to the engine. Simple replacement for hedge trimmers and blowers.

Won't start or smells like fuel? A damaged or clogged fuel line prevents proper fuel flow to the carburetor. Quick DIY fix—replace the line to restore performance.

Seals fuel line connections at the tank to prevent leaks. Replace when worn, cracked, or leaking fuel vapors. Verify fit with your model number.

Secures fuel line to carburetor or fuel filter on outdoor power tools. Replace if loose, brittle, or causing fuel leaks. Verify fit with your model.

Felt fuel filter cleans fuel before it reaches the carburetor. Replace if clogged to restore proper fuel flow and engine starting. Fits 3/16" fuel lines.

The 5x20 screw is designed for use with Echo engines. This is a standard piece of hardware that has multiple applications for securing engine components and housings depending on the exact model and type of machine. The screw can become stripped or worn over time, break off due to an incident or impact, or even get lost during other repairs. In any situation, this screw will need to be replaced as quickly as possible to prevent any further damage or issues with the operation of the equipment. This genuine OEM screw will work with select models of equipment from Echo, Shindaiwa, and Little Wonder. It can be used with over 150 trimmers, edgers, blowers, and hedge trimmers. This screw has multiple uses on various models so consult the parts diagram for exact location and replacement process. This screw requires a phillps head screwdriver for replacement. It is sold individually and includes the washer and lock washer to create a secure seal. Those who need additional screws will have to purchase multiple quantities.

Fuel cap assembly for gas-powered hedge trimmers and leaf blowers. Covers fuel tank opening to keep fuel secure and debris out. Replace if lost, cracked, or won't tighten properly. Includes retainer and gasket.

This is a genuine fuel cap gasket replacement designed for use in certain lawn and garden equipment engines. The fuel cap gasket is threaded onto the tank with the fuel cap, creating an airtight seal and ensuring that gasoline doesn't leak out while the machine is in use. This gasket can become corroded from the chemicals over time or simply become worn and ineffective at sealing as the rubber wears out. In some cases, the gasket is lost. A replacement with an OEM part like this will be required. This replacement fuel cap is manufactured to exact OEM standards by Echo and can be used for select models of hedge trimmers, blowers, edgers, and grass trimmers made by Echo, Little Wonder, and Shindaiwa. This gasket is sold as an individual unit and does not include any additional hardware or parts. This durable rubber gasket is easy to replace. Simply take off the fuel cap and remove the old gasket, if still present. Then, put the new gasket on the fuel tank or in the cap (depending on the requirement of the model being repaired) and replace the fuel cap. Be sure to allow the unit to cool and wear gloves when performing repairs.

Lost or cracked fuel cap connector on your edger? This cap connector keeps your fuel tank cap securely attached during use and prevents loss at refueling.