Parts for Lg LRSOC2306S/00: Freezer Compartment Parts

Replace your refrigerator's rear handle if it's cracked, broken, or missing. This structural support handle mounts to the back panel of your unit.

Water pooling in your refrigerator? This drain tube assembly channels defrost water from the drain pan to prevent leaks and buildup in side-by-side models.

Connector link between refrigerator door and cabinet. Replace if original is broken, cracked, or worn. Essential for smooth door operation and alignment.

This duct assembly routes airflow inside the appliance to restore proper ventilation and performance. It replaces a damaged, crushed, or disconnected duct to help reduce restricted airflow and related operation issues. What it does:

• Channels air through the appliance's ventilation path to maintain correct airflow
• Helps resolve symptoms caused by restricted or misdirected airflow, such as reduced drying/venting performance or overheating warnings
• Replaces ducts that are cracked, collapsed, or disconnected and may cause unusual noises or airflow loss
• Works as the internal airflow connector between housing components

• One duct assembly

• Disconnect power (and gas if applicable) before beginning any service
• Handle edges carefully; use gloves to avoid cuts from sheet metal
• Secure all clamps/fasteners; check seals and clearances before returning the appliance to service

Fix ice spilling or not dispensing properly with a new ice bucket assembly. Collects and stores ice from your ice maker. Moderate DIY repair.

Removable ice bucket assembly that collects and stores ice from your refrigerator's icemaker. Replace if cracked, warped, damaged, or missing.

Plastic cap that covers the air duct opening in your refrigerator. Replace if cracked, broken, or missing to restore proper airflow channel coverage.

Replace a cracked, broken, or missing inner refrigerator drawer tray. Restores storage in the lower compartment for organized produce and food containment.

Replace a cracked, warped, or damaged refrigerator drawer tray. This assembly restores the drawer surface for secure storage and smooth operation.

Replace a cracked, broken, or missing refrigerator shelf. Restores storage space with a stable surface for food and containers. Installs in existing rails.

Replace a cracked, broken, or missing refrigerator shelf assembly. Restores storage space and organization in your side-by-side refrigerator.

Replace a cracked, chipped, or missing refrigerator shelf. Restores usable storage space with a solid, level surface for secure food placement.

Refrigerator control panel cover assembly that protects the display and control interface. Replace if cracked, broken, or discolored to restore appearance.

Replaces cracked, broken, or missing cabinet TV cover assembly on side-by-side refrigerators. Restores fit and appearance while protecting components.

Fix refrigerator door misalignment or poor sealing with this door alignment magnet. Restores magnetic retention to keep panels and components secure.

Replaces deteriorated freezer door insulation foam to restore proper sealing and temperature control. Install when foam is torn, compressed, or water-damaged.

Seals your refrigerator door to maintain stable temperatures and prevent frost buildup. Replace if torn, warped, or leaking. Confirm fit with your model.

Cushions and controls your refrigerator door to prevent slamming and maintain proper alignment. Replace if door slams, misaligns, or stopper is damaged.

Replaces a cracked, broken, or missing door basket on your side-by-side refrigerator. Mounts to the inner door to hold bottles, jars, and condiments.

Restore a tight seal on your refrigerator door. Replace this gasket when you notice frost buildup, warm spots, or air leaks. Confirm fit with your model.

Refrigerator door basket mounts to the inner door liner to hold bottles, jars, and condiments. Replace your cracked, broken, or missing basket.

Lower door bin for side-by-side refrigerators. Stores condiments, jars, and bottles. Replace if cracked, broken, or won't stay in place on door tabs.

Replace a cracked, broken, or missing hinge cover on your side-by-side refrigerator. This cosmetic trim piece covers the door hinge mechanism for a clean look.

Secures the top refrigerator door to the cabinet and provides the pivot point for smooth opening. Replace if hinge is cracked, broken, or worn.

Fix a refrigerator that's not cooling properly or making loud noises with this evaporator fan motor. Accessed through the freezer's rear panel.

Lower door hinge assembly for side-by-side refrigerators. Mounts at the bottom of the door to support weight and allow smooth opening. Replace if cracked or worn.

Fix temperature fluctuations or error codes with this refrigerator sensor control board. Moderate repair requiring basic tools and 30-45 minutes to install.

Refrigerator roller wheel for leveling and mobility. Replaces worn, cracked, or broken rollers that prevent smooth movement or proper leveling.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Fix a refrigerator that's not cooling or running constantly with this compressor set assembly. Includes condenser coil, filter drier, and accumulator.

Fix incorrect temperature readings or inconsistent cooling with this refrigerator thermistor assembly. Moderately easy repair for bottom-mount models.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Fridge door baffle won't stay flat when opening? This door restrainer spring keeps the baffle panel sealed. Common fix for French door models.

Secures the drier assembly to the refrigerator frame. Replace if the clip is cracked, broken, or missing to restore stability and reduce movement.

If your refrigerator has uneven cooling or fan noise, the fan guide may be damaged. This part channels airflow properly and prevents blade rubbing.

This condenser assembly wire harness routes power and signals to the refrigerator condenser and fan components, restoring proper condenser operation and improving cooling reliability. Replaces a damaged or disconnected condenser wiring assembly. What it does:

• Provides the electrical connection between the condenser, fan motor, and control components.
• Restores power and signal continuity to condenser components when wiring is frayed, burned, or broken.
• Helps eliminate intermittent condenser or fan failures and related cooling issues.
• Matches OEM connector types and routing for correct fit and function when installed.

• Disconnect power to the appliance before attempting any service to avoid shock or injury.
• Verify connectors and routing match the original harness; secure wiring away from moving parts and heat sources.
• Use proper tools and follow OEM service instructions.
• Inspect associated terminals and components for damage and replace as needed to ensure reliable operation.

Refrigerator making loud noise or not cooling evenly? This fan assembly circulates air to eliminate hot spots and restore consistent temperatures.

Fix uneven cooling or warm spots in your refrigerator with a new evaporator fan blade. This part circulates cold air throughout the unit for consistent temps.

Protective fan grill assembly for side-by-side refrigerators. Covers and shields the internal fan. Replace if cracked, broken, or missing parts.

If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Replace a failed DC motor when your refrigerator's system stops rotating or won't start. Direct-fit motor assembly restores consistent operation.

Fixes refrigerator running warm or compressor area overheating. This fan motor assembly circulates air over the condenser coils to regulate temperature.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.

Fix a refrigerator that won't power on with this power cord assembly. Connects your side-by-side refrigerator to the electrical outlet. Simple installation.

Fix a refrigerator that won't cool, power on, or respond to controls. This main control board restores power distribution and normal operation.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

This cover assembly protects the appliance control PCB and wiring from dust, moisture, and accidental contact to help maintain reliable operation. It provides a clean mounting point and helps prevent shorting or damage to the electronics. What it does:

• Shields the control printed circuit board from debris and incidental contact
• Helps route and secure wiring around the board to reduce strain and wear
• Reduces risk of short circuits caused by foreign objects or moisture
• Restores proper enclosure fit and alignment after board service or replacement

• Disconnect power and unplug the appliance before servicing to prevent shock or injury
• Remove access panels as required to reach the control board; handle PCB and cover carefully to avoid damaging components
• Secure the cover with the original mounting hardware; only use screws specified by the manufacturer
• Replace damaged components before re-energizing the appliance

Deodorizer cover assembly for side-by-side refrigerators. Secures and protects the air filter deodorizer unit. Replace if cracked, broken, or missing.

Reduces food and musty odors in your refrigerator's fresh food compartment. Replace every 6 months for optimal freshness. Confirm fit with your model.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

Restores clean-tasting water and steady flow by filtering sediment and contaminants. Replace every 6 months or when flow weakens. Verify fit with your model.

The Ice Maker Assembly Kit is an OEM part for LG refrigerators. It includes the ice maker along with all related components needed for installation and operation. This assembly works with the freezer to automatically produce ice cubes on demand.

Causes of a bad ice maker assembly include wear and tear over time, failure of electronic functions that control ice production, or buildup and blockages that prevent proper ice ejection. 

Symptoms of a bad assembly include:

• Insufficient or inconsistent ice production  
• Ice cubes jammed or clumped together
• Strange noises from the ice maker area
• Error codes displayed related to ice functions

This OEM LG part is also compatible with select Sears/Kenmore models.

Ice dispenser jammed or leaking? This in-door assembly channels ice through the chute and supports operating components. Restores reliable dispensing.

Duct cap assembly for side-by-side refrigerators. Covers and seals the air duct opening. Replace if cracked, broken, or missing to maintain proper airflow.

Fix weak water flow or leaking dispenser with this refrigerator water tank assembly. Restores proper chilled water storage and delivery to your dispenser.

Replaces cracked or broken tube connector in your refrigerator. Secures and routes tubing to prevent leaks from loose connections. Easy install.

If your ice maker isn't filling or water dispenser has stopped working, this inlet valve assembly controls water flow to restore normal operation.

Fix water dispenser leaks or no ice with this inline water connector tube. Joins refrigerator water lines to restore secure flow. Simple repair.

Replacement wire harness connector for refrigerators. Restores secure electrical connections between wiring and control components. Needed when damaged or worn.

Secures hoses and tubing in your refrigerator to prevent leaks. Replace if worn, cracked, or losing grip. Verify fit with your model number listed.