Parts for Kitchenaid KRSC700HPS01: Freezer Liner Parts

This tempered glass shelf replaces a damaged or missing refrigerator shelf to restore storage space and a stable surface for food containers. Made to support everyday fridge use while keeping contents organized and visible. What it does:

• Provides a flat, durable surface for storing food and containers in the refrigerator.
• Replaces cracked, chipped, or missing shelves that cause items to be unstable or unsafe.
• Helps contain minor spills and makes cleanup easier compared to wire shelving.
• Restores correct shelf spacing to improve organization and usable storage.

• One tempered glass shelf

• Handle tempered glass with care; wear gloves and eye protection to avoid injury.
• Remove food and shelves from adjacent areas before installing; slide shelf into existing tracks or supports until fully seated.
• If shelf uses trim or retainer clips, ensure clips are intact and positioned per the appliance's shelf rails.
• Do not force the shelf into place; if it doesn't seat smoothly, check alignment of the rails or supports.

The Refrigerator Temperature Sensor is an OEM replacement part for Whirlpool refrigerators. It is a crucial component responsible for accurately monitoring and regulating the temperature inside the refrigerator and freezer compartments.

Symptoms of a faulty temperature sensor include:

• Inconsistent or fluctuating temperatures in the refrigerator or freezer
• The refrigerator running continuously or not cooling properly
• Error codes or indicators related to temperature control issues

Causes of a bad temperature sensor can include normal wear and tear over time, electrical malfunctions, sensor failure, or damage from moisture or condensation.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models. 

This glass shelf replaces a broken, chipped, or missing refrigerator shelf to restore usable storage space and keep foods organized. It provides a stable, flat surface for holding containers and groceries. What it does:

• Replaces a damaged or missing refrigerator interior shelf
• Restores a level surface so items sit securely and drawers can close properly
• Helps prevent spills by providing an even storage plane
• Commonly used when shelf glass is cracked, chipped, or no longer seating correctly

• One glass refrigerator shelf

• Remove food and containers from the shelf area before installing
• Slide into shelf supports until fully seated; it rests level and secure
• Handle with care to avoid chipping or cuts; wear gloves if needed
• No tools or electrical disconnection required for typical shelf replacement

This replacement freezer bin is the plastic storage drawer that organizes and contains frozen foods in the freezer compartment. It restores lost storage space and keeps items accessible and tidy. What it does:

• Provides a dedicated drawer for frozen goods to prevent loose items from shifting
• Helps contain spills and makes cleaning the freezer easier
• Slides into the freezer compartment to improve organization and access
• Replaces cracked, broken, or missing freezer drawers that no longer hold items

• Remove all food from the drawer before replacing; handle on a flat, stable surface
• Slide the bin onto the freezer rails/guides until it seats; ensure it moves smoothly
• Inspect mounting rails or stops for damage; replace separately if worn or broken
• Use gloves to avoid cuts on sharp edges when removing interior panels or rails

The Drawer Roller is an OEM part for Whirlpool refrigerators, specifically designed to facilitate the smooth and effortless sliding of drawers within the appliance. This small but crucial component ensures that the refrigerator's drawers open and close with ease, allowing for convenient access to fruits, vegetables, meats, and other items stored inside. 

Causes of a bad Drawer Roller can stem from wear and tear over time, accumulation of debris or food particles in the roller mechanism, or damage from overloading the drawer beyond its capacity.  

Symptoms of a bad Drawer Roller include:

• Drawers sticking or jamming when you try to open or close them
• A grinding or squeaking noise during drawer movement
• The drawer sagging or not aligning properly within the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Axle is an OEM part for Whirlpool refrigerators. It is the mechanism that supports and enables smooth extension of shelves and drawers on sliding tracks.

Causes of a bad slide axle can include normal wear to plastic bushings from constant shelf movement, or damage from sharp or heavy items that cause stress and premature failure.

Symptoms of a faulty slide axle include:

• Shelves or drawers that do not fully extend or retract
• Resistance felt while pulling shelves out
• Squeaking or grinding noises coming from sliding areas
• Shelves that do not stay securely in place once extended

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement freezer bin restores interior storage space and organization in the freezer compartment. It provides a sturdy, easy-to-clean shelf for frozen foods so items stay contained and accessible. What it does:

• Replaces a cracked, broken, or missing freezer storage bin to restore holding capacity
• Keeps frozen items organized and prevents smaller items from falling into lower areas
• Slides into existing door/rack channels for stable support during normal use
• Clear design makes it easy to see contents without removing the bin

• Remove all items from the affected area before installing the bin
• Typically installs by sliding or snapping into existing rails—no special tools required
• If binding or misaligned, inspect mounting rails for damage before forcing into place
• Disconnect power and empty nearby shelves if working in tight spaces to avoid injury

The Door Switch is an OEM part for Whirlpool refrigerators. This switch is crucial for controlling the interior lights and the activation of certain refrigerator functions when the door is opened or closed. 

Symptoms of a failing Door Switch include:

• Interior lights staying on when the refrigerator door is closed
• Interior lights not turning on when the door is opened
• The refrigerator unexpectedly starting or stopping
• Alarms or indicators malfunctioning, signaling an open door when it is closed

Causes of a bad door switch can involve mechanical failure due to wear and tear from frequent use, damage from impacts (such as slamming the door), or electrical issues like a short circuit or faulty wiring.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This thermistor cover shields and positions the refrigerator's temperature sensor so it reads cabinet air accurately. Replacing a cracked or missing cover helps restore stable temperatures and normal cooling performance.

• Holds the thermistor in place and shields it from direct airflow for accurate temperature sensing
• Helps prevent erratic temperatures, overcooling/undercooling, or long run times caused by an exposed sensor
• Commonly replaced when the original cover is cracked, loose, or missing
• Supports consistent temperature control by ensuring proper sensor placement

• Disconnect power before servicing
• Remove shelves/bins as needed to access the sensor location
• Align the thermistor and seat the cover fully; engage tabs or reuse existing hardware per model
• Avoid pinching the sensor or wiring and verify the cover is snug

The LED Light Module is an OEM part for Whirlpool refrigerators. It provides illumination inside the refrigerator, ensuring clear visibility of the stored items. The module includes energy-efficient LED lights designed to last longer than traditional bulbs.

Over time, the LED light module can fail due to electrical issues, wear and tear, or damage from power surges. Exposure to moisture or accidental impact can also contribute to its malfunction.

Symptoms of a bad LED Light Module include:

• Dim or flickering light
• Light not turning on at all
• Intermittent lighting issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Light is an OEM component specifically designed for Whirlpool refrigerators. It illuminates the refrigerator interior to easily view contents.

Causes of bad light include natural bulb burnout, damage to connectors or housing, or failure from moisture exposure. 

Symptoms of a bad light include:

• Dim or no light when the door is opened  
• Flickering or intermittent illumination
• Broken or detached lighting assembly

This light replacement is also compatible with select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators.