Parts for Thermador T36IT71FN/02: Freezer Parts

The Freezer Clip is an OEM part for Bosch refrigerators. It is designed to secure various components within the freezer compartment, ensuring they remain in place during regular use and while opening and closing the freezer door.

Causes of a bad freezer clip can include wear and tear over time, breakage due to handling or impact, or exposure to extreme temperatures that cause the clip to become brittle and snap. Ensuring the clip is intact and functioning properly is essential for maintaining the organization and efficiency of the freezer space.

Symptoms of a bad freezer clip include:

• Items or shelves in the freezer becoming dislodged
• Difficulty in keeping freezer components in place
• Unusual noises from components moving within the freezer

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This small clip is a retaining fastener that secures a part, panel, or trim in place inside your appliance. Replacing a worn or missing clip restores a tight fit and keeps components properly aligned to reduce rattles or movement. What it does:

• Retains a panel, cover, trim piece, or component on its mounting point
• Helps maintain alignment and reduce vibration-related noise
• Replace if the clip is cracked, bent, corroded, or has lost spring tension
• Common symptoms: loose or rattling parts, components that won't stay attached, or a visibly missing/broken clip

• One clip

• Disconnect power and, if applicable, shut off water before servicing
• Note the original clip's orientation and location for accurate reassembly
• Use needle-nose pliers to release/install; avoid over-bending the clip
• After installation, ensure the secured part is fully seated and stable before restoring power

This rail guides a dishwasher rack so it slides smoothly in and out, restoring proper rack alignment and reducing jams. It's a direct-fit replacement when an original rail is bent, worn, or broken. What it does

• Guides the rack on its rollers to keep it level and aligned during loading and unloading
• Prevents the rack from binding or derailing while extending or retracting
• Helps restore smooth rack movement if the original rail is bent, cracked, or worn
• Works with the rack rollers and end stops to maintain safe, consistent operation

• One replacement rail

• Basic tools are usually all that's required; verify rail orientation before removing the old part
• Remove the affected rack and rollers as needed to access and replace the rail
• Inspect rollers and end stops while servicing; replace any damaged components for best results
• Disconnect power to the appliance before performing any service that exposes wiring or electrical components

The Fan Motor is an OEM part for Bosch refrigerators. It is responsible for circulating cold air throughout the freezer compartment to keep your freezer contents frozen.  

A bad fan motor can occur due to normal wear and tear, electrical malfunctions, or damage from frost buildup or debris. Signs of a faulty fan motor include reduced cooling performance, unusual noises coming from the freezer, or the presence of frost or ice buildup.

Symptoms of a bad fan motor include:

• Insufficient cooling in the freezer  
• Unusual noises 
• Excessive frost or ice buildup  

Replace your faulty fan motor with this genuine OEM Bosch part to restore your refrigerator. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This gutter heating heating element helps prevent ice dams and keeps gutters and downspouts clear so melting water can drain away. It's a direct-replacement service part used in compatible Bosch systems to reduce ice buildup. What it does

• Provides localized heat to gutters and downspouts to help melt snow and ice
• Helps reduce ice dam formation that can cause overflow or water backup
• Restores proper drainage when frozen buildup is the cause of gutter blockage
• Commonly used when you see visible ice on gutters, water backing up, or slow roof drainage

• One gutter heating element assembly

• Intended for installation by an experienced DIYer familiar with appliance electrical work
• Disconnect power to the appliance and associated circuits before servicing
• Follow OEM wiring and mounting instructions; use appropriate outdoor-rated wiring and fasteners
• Inspect connections and weather seals after installation and test operation before finalizing

This temperature limiter safeguards the evaporator defrost heater by opening the circuit if temperatures rise too high. Replacing a failed limiter restores defrost safety and helps prevent frost buildup and inconsistent cooling performance.

• Protects the defrost circuit by cutting power to the evaporator heater when an over-temperature condition is detected
• An open/failed limiter prevents the heater from energizing, causing frost accumulation on the evaporator and warm refrigerator temps
• Designed to be installed in the original location and orientation for accurate temperature sensing

• Disconnect power before servicing; evaporator fins and sheet metal are sharp—use cut-resistant gloves
• Access the evaporator compartment and note the limiter's original mounting and wire routing before removal
• Transfer any clips/insulation sleeves and reconnect wiring to the same terminals; do not bypass this safety device
• Reassemble, restore power, and monitor for normal defrost operation

This defrost heater warms the evaporator coil to melt frost and ice buildup so the refrigerator can maintain proper airflow and cooling performance. Replaces a failed heater to restore normal automatic defrost cycles. What it does:

• Generates heat at the evaporator during defrost cycles to remove accumulated frost and ice
• Helps restore airflow and consistent cooling when the evaporator is ice-covered
• Commonly replaced for symptoms like excessive frost/ice buildup, poor cooling, or frequent defrost cycling
• Works with the freezer's defrost control and thermostat to operate only during defrost events

• Disconnect power to the appliance before servicing to avoid electrical shock
• Verify the evaporator assembly and defrost thermostat/timer are accessible and in good condition before installation
• Handle the heater and evaporator fins carefully to avoid damage; replace any damaged clips or insulation as needed

This fixture is the OEM replacement mounting piece designed to secure internal components and restore proper alignment and support. It helps keep parts stable for reliable operation and reduces noise caused by loose hardware. What it does:

• Secures internal panels or components to the appliance frame to prevent movement
• Restores proper alignment to reduce rubbing, vibration, or rattling noises
• Provides the correct mounting point for linked components to operate as intended
• Replaces damaged or missing fixtures that can cause part instability or failure

• Recommended for users comfortable with basic disassembly; unplug the appliance before starting.
• Keep fasteners and surrounding parts organized during removal to ensure correct reassembly.
• Inspect mating surfaces for damage or wear; replace adjacent hardware if needed.

This insulating part is a direct-replacement insulation pad that restores the appliance's thermal protection and helps reduce heat transfer and noise. Use it to replace a worn, damaged, or missing insulation element. What it does:

• Provides thermal insulation to limit heat transfer to adjacent components and cabinet surfaces
• Dampens vibration and helps reduce operational noise
• Protects wiring and nearby components from excessive heat exposure
• Addresses symptoms such as visible torn/missing insulation, heat feeling on exterior panels, or increased noise

• Disconnect power (unplug or switch off breaker) and allow the appliance to cool before starting.
• Handle gently—insulation can be fragile; reattach using existing clips or fasteners as OEM specifies.
• Use basic hand tools; follow OEM placement and orientation for proper coverage.

This ice container stores and dispenses cubed ice from the freezer or ice maker, keeping ice consolidated and easy to access. Durable plastic construction fits original mounting points and helps reduce spills and clumping. What it does:

• Holds and organizes cubed ice produced by the ice maker
• Keeps ice contained to prevent spreading inside the freezer compartment
• Makes it easier to access and scoop ice without disturbing the ice maker
• Helps reduce ice clumping and breakage compared with loose storage

• One ice container

• Remove power to the appliance or disconnect the ice maker before servicing to avoid injury
• Slide the old bin out and seat the replacement into the same guides until it clicks or rests securely
• No special tools typically required; handle with care to avoid cracking the plastic
• If ice or frost blocks fitment, defrost area before installing

This NTC temperature sensor monitors internal temperature and sends precise resistance signals to the control, allowing accurate heating and cycle management. Replacing a faulty sensor restores proper temperature regulation and consistent performance.

• Senses temperature changes and varies resistance (NTC) for the control
• Helps regulate heater operation and overall cycle timing
• Can lead to extended/shortened cycles or premature shutdown
• May trigger temperature-related error codes

• Disconnect power before servicing; shut off water supply if applicable
• Note connector orientation and wire routing; transfer any retainers or seals from the old sensor if needed
• Seat the sensor fully in its pocket/bracket and route wiring away from hot or moving parts
• Restore power and run a test/diagnostic cycle to confirm proper operation

A direct-replacement connection piece that restores a secure, watertight junction between the appliance and its inlet hose. Replaces worn or damaged connectors to help stop leaks and ensure reliable water flow into the unit. What it does:

• Provides a sealed connection between the inlet hose and the appliance to prevent leaks
• Maintains proper water flow to the appliance for normal fill and operation
• Addresses common symptoms like water pooling or dripping at the hose connection
• Useful when the original connector is cracked, warped, or otherwise failing

• One connection piece

• Turn off water supply and disconnect power before starting work
• Inspect mating surfaces and replace any worn seals or O-rings as needed
• Hand-thread carefully to avoid cross-threading; tighten securely but avoid overtightening

This replacement cover is a protective outer piece that helps keep internal components safe from moisture, dust and debris. It restores the original enclosure and helps reduce vibration and noise caused by damaged or missing covers. What it does

• Protects wiring, connectors and nearby components from moisture and contaminants
• Keeps small parts secured and helps prevent rubbing or vibration against moving components
• Helps stop visible rattling or scraping caused by a cracked or missing cover
• Useful when the original cover is cracked, warped, broken or otherwise damaged

• One replacement cover

• Disconnect power to the appliance before starting any repair
• Confirm orientation and clip locations before removing the old cover to avoid breaking fasteners
• Use gentle pressure to seat the cover; do not force broken clips—replace fasteners if needed