Parts for Thermador T36IT71FN/02: Doors Assy Parts

This fixture is the OEM mounting bracket used to secure internal components inside the appliance, keeping assemblies aligned and stable for reliable operation. It replaces a broken or worn bracket to restore proper fit and reduce movement. What it does

• Secures and positions internal parts to prevent shifting or rattling during operation
• Restores proper alignment of assemblies that rely on the bracket for support
• Can help stop intermittent noises or misfeeds caused by a loose or broken mount
• Protects adjacent components by holding parts in the correct location

• One fixture (mounting bracket) as shown

• Always disconnect power and water before starting repairs
• Typical installation requires basic hand tools; avoid overtightening plastic fasteners
• If damaged surrounding fittings are present, inspect and replace them to ensure a secure fit

This housing cover protects internal components and keeps wiring and mechanisms shielded from debris and moisture. It helps maintain safe operation and prevents accidental contact with moving or electrical parts. What it does

• Shields internal components from dirt, moisture, and incidental contact
• Helps prevent wires or small parts from snagging or becoming exposed
• Maintains proper airflow and alignment around the covered area
• Can reduce noise by enclosing moving parts

• One cover

• Disconnect power (unplug appliance or shut off breaker) before accessing internal components
• Use basic hand tools; avoid forcing tabs or fasteners to prevent breakage
• Replace any missing or damaged mounting hardware before returning appliance to service

This fixture is a small mounting clamp that secures internal components in place to keep them aligned and stable during normal appliance operation. It helps reduce movement and vibration for a quieter, more reliable appliance. What it does:

• Holds internal assemblies or wiring harnesses securely to prevent shifting
• Keeps parts properly positioned to maintain function and reduce wear
• Helps reduce rattling or vibration caused by loose components
• Supports safe, consistent operation by keeping components from contacting other parts

• Disconnect power and water supply before accessing internal components
• Basic hand tools may be required to remove panels and fasten the fixture
• Inspect surrounding clips and fasteners; replace any that are damaged

This is a replacement mounting screw used to secure panels and components in Bosch appliances. It restores proper fastening to prevent loose parts and rattling for safer, quieter operation. What it does:

• Secures panels, brackets or small components to the appliance chassis
• Restores tight fastening when original screw is missing, stripped, or damaged
• Helps eliminate vibration noise and movement caused by loose parts
• Compatible with the specific mounting location shown in the OEM parts diagram

• One replacement mounting screw

• Disconnect power and water before servicing the appliance
• Use the correct screwdriver or bit to avoid stripping the head; do not overtighten
• Replace only the screw(s) shown in the repair diagram; keep extras for future use
• If threads are damaged, replace the mating nut or insert per OEM guidance

This OEM-style fixture is the replacement mounting piece that secures internal components and helps keep panels, racks or assemblies aligned for reliable operation. Replacing a broken or worn fixture restores proper fit and reduces rattling or movement. What it does

• Provides a secure mounting point for an internal panel, trim piece, or appliance assembly
• Keeps connected parts aligned to prevent binding, gaps, or misfit
• Helps stop vibration-related noise caused by loose or damaged mounting points
• Commonly replaced when the original shows cracks, breaks, or excessive wear

• Disconnect power and water before beginning service
• Handle sharp edges and plastic tabs carefully to avoid damage or injury
• Basic hand tools are usually required; consult your model's parts diagram for exact placement

The Mullion Heater is an OEM part for Bosch refrigerators. It is designed to prevent condensation from forming on the refrigerator door mullion, the vertical divider between the doors. This heater ensures that the mullion stays warm enough to stop moisture from condensing and causing potential water damage or mold growth.

Causes of a bad mullion heater can include electrical failures, wear and tear from continuous use, or manufacturing defects.  

Symptoms of a bad mullion heater include:

• Visible condensation or frost on the door mullion
• Water pooling or dripping around the door area
• Increased humidity inside the refrigerator
• Mold or mildew developing near the door seal

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This is a mounting fixing kit used to secure specific dishwasher components. It replaces worn or missing hardware so parts stay firmly in place and the appliance operates as intended.

• Secures designated parts to prevent loosening, rattling, or misalignment
• Helps resolve issues like loose panels or components shifting during cycles
• Useful when original fasteners are stripped, corroded, or lost
• Restores proper fitment after service or replacement of related parts

• Disconnect power and turn off water before servicing
• Keep track of original hardware locations for correct reassembly
• Hand-start screws to avoid cross-threading; tighten to snug, do not overtighten
• Address corrosion or damage present on mating parts before installation

This perimeter door seal fits into the dishwasher tub channel along the sides and top of the door. It contains wash water and steam to help prevent front leaks and ensure proper door compression.

• Seals the gap between the door and tub on the sides and top
• Helps stop water drips at the front corners and along the door edge
• Reduces escaping steam and moisture at the door area
• Common signs of wear: leaks from the door, visible tears/flattening, musty odor, or the door not sealing smoothly

• Disconnect power and turn off the water supply before servicing
• Open the door, pull the old gasket straight out; clean the channel of debris and residue
• Find the midpoint of the new seal at the top center and press it evenly into the channel down both sides without stretching
• Close the door to help seat the seal, then run a test cycle and check for leaks

This factory repair set provides the factory-specified components needed to restore proper operation of compatible Bosch appliances. It replaces worn or damaged service parts so the appliance can perform as intended. What it does

• Replaces the original service components supplied in the repair set to restore normal function.
• Helps stop symptoms caused by worn parts, such as loose fittings, intermittent operation, or minor leaks when those parts are affected.
• Restores proper alignment or mounting where included components secure moving parts.
• Useful when troubleshooting issues traced to the specific assembly the kit services.

• Disconnect power and, if applicable, water supply before beginning any repair.
• Follow the manufacturer's service instructions and use only the supplied components.
• Inspect surrounding parts for wear; replace additional damaged components as needed.

This rail is the replacement rack slide that supports and guides a dishwasher rack for smooth in-and-out movement, restoring proper rack alignment and preventing binding or uneven sliding. What it does:

• Guides the rack along the dishwasher cavity for stable, even travel
• Replaces worn or broken slide surfaces that cause sticking or noisy movement
• Helps restore correct rack alignment to prevent tipping or uneven loading
• Works with the existing rack rollers and mounting brackets to re-enable smooth operation

• Disconnect power and water supply before starting any repairs
• Remove the dishwasher rack and unclip or unscrew the old rail per your model's instructions
• Align the replacement rail with the rack rollers and secure all clips or fasteners firmly
• Replace damaged rollers or mounting hardware at the same time for best results

This front door panel replaces a damaged or dented dishwasher door to restore appearance and proper closure. It provides the outer surface and mounting points needed for normal operation and a finished look. What it does:

• Replaces a cracked, dented or cosmetically damaged front door panel
• Restores proper sealing and alignment so the door closes evenly
• Provides original mounting points for the handle, console and hinges
• Helps prevent water intrusion and protects internal components

• Disconnect power and water supply before beginning any repair
• Support the door assembly while removing hinge fasteners to avoid dropping
• Handle panel edges carefully to avoid cuts or damage to the finish
• Reuse original screws, handles and trim unless replacement parts are specified

The Door Seal is an OEM part for Bosch refrigerators. This part maintains the refrigerator’s internal temperature by creating a tight barrier around the door, preventing cold air from escaping and warm air from entering.

Causes of a bad door seal can include normal wear and tear, damage from frequent opening and closing, exposure to fluctuating temperatures, or buildup of dirt and debris.

Symptoms of a bad Door Seal include:

• Visible cracks, tears, or deformation on the seal
• Condensation or frost buildup inside the refrigerator
• Refrigerator running more frequently
• Warm spots inside the refrigerator

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.