Parts for Lg LFCS22520W/00: Freezer Parts

Replacement mounting screw for refrigerator panels, brackets, and internal components. Needed when original fastener is missing, stripped, or damaged.

Secures panels, brackets, and trim components inside your refrigerator. Replace this fastener if it's stripped, lost, or damaged to restore alignment.

Replacement mounting screw for securing panels, brackets, and assembliance components. Needed when original screws are missing, stripped, or damaged.

Replace your broken or cracked refrigerator door bin holder. This structural component secures door bins in place on bottom-mount refrigerators.

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Replace your refrigerator's adjustable leveling leg assembly if cracked, broken, or missing. Installs at the base to level and stabilize your unit.

Multi-duct assembly for bottom-mount refrigerators. Replaces damaged or broken air distribution ducts inside the refrigerator compartment. Order now.

Secures slide rails so shelves and drawers glide smoothly in your refrigerator. Replace when rails sag or come loose. Confirm fit with your model.

Replacement rail holder bracket that secures the rail assembly in your refrigerator. Needed when the original mount is cracked, broken, or missing.

Right-hand rail guide assembly for refrigerator drawers and shelves. Ensures smooth sliding and proper alignment. Replace if cracked, broken, or worn.

Left-hand drawer rail guide assembly for refrigerator bottom compartment. Replace when cracked, broken, or causing drawer misalignment or rough sliding.

Stores ice from your refrigerator's ice maker. Replace if cracked, warped, or damaged, causing ice jams, poor dispensing, or freezer mess.

Replace worn drawer rollers to restore smooth, quiet sliding in your refrigerator. Fixes binding, noise, and uneven travel. Confirm fit with your model.

Freezer drawer roller assembly for refrigerators. Installs on bottom drawer to enable smooth gliding. Replace if roller is cracked, broken, or worn.

Roller assembly for refrigerator freezer drawers. Replaces broken, cracked, or missing rollers that prevent smooth drawer gliding. Snaps into place.

Plastic tray that sits inside refrigerator drawer compartments. Replace if cracked, warped, or broken. Maintains drawer organization and contents.

Replacement freezer drawer tray for bottom-mount refrigerators. Organizes frozen foods inside pull-out compartment. Replace if cracked, broken, or warped.

Replace a cracked, broken, or missing refrigerator shelf assembly. This structural component installs inside your fridge to hold food and beverages.

Replace cracked, broken, or missing glass shelf assembly in your refrigerator. Includes tempered glass surface and front trim for stable food storage.

Refrigerator shelf holder that secures shelving in place. Replace if your holder is cracked, broken, or missing to properly support refrigerator shelves.

Microwave door won't close properly or wobbles? This rail holder secures the door rail assembly to restore smooth alignment and operation.

Replacement rail holder that secures sliding rails in your refrigerator. Installs on the frame to restore alignment. Needed when cracked or broken.

Drawer glide rail assembly supports and guides refrigerator drawers for smooth opening and closing. Replace if drawer sticks or misaligns. Confirm fit.

Drawer slide rail guide assembly for refrigerators. Installs to support and align drawers. Replace if cracked, bent, broken, or causing misalignment.

Replaces worn or damaged refrigerator drawer rail guide assembly. Restores smooth sliding when original guide is cracked, broken, or causing binding.

Fix loose or stuck control knobs with this control panel shutter. Restores proper knob engagement and prevents debris buildup. Simple snap-in repair.

Replace a cracked or missing produce bin so fruits and vegetables store at the proper humidity and your fridge stays organized. This direct-fit crisper drawer restores clean, reliable storage in the fresh-food section.

What it does

• Stores produce at a humidity level intended for fruits and vegetables
• Restores smooth pull-out/push-in operation when paired with intact slides
• Helps prevent spills and items dropping behind the drawers
• Replaces damaged bins that stick, wobble, or won’t seat correctly

What’s included
One vegetable/crisper drawer (sold individually).

Install notes

• Slide the old bin straight out; align and seat the new bin on the guides—no tools required
• Do not force; ensure the rail guides and center track are fully engaged
• Hand-wash only; avoid harsh cleaners that can stress and crack plastics

Usage tip
Keep heavier items on shelves above; overloading the bin can crack corners and stress the rails.

Restore a clean, reliable produce bin. This crisper drawer (vegetable tray) replaces cracked or missing bins so fruits and vegetables store properly and your fridge stays organized with smooth pull-out access.

What it does

• Provides dedicated produce storage in the fresh-food compartment
• Helps maintain proper humidity when used with the crisper cover
• Restores smooth slide-in/slide-out operation
• Helps prevent spills and items dropping behind the drawers
• Replaces damaged bins that stick, wobble, or won’t seat correctly

What’s included
One vegetable/crisper drawer bin (sold individually).

Install notes

• Unplug power before moving shelves or covers
• Pull the old bin straight out; align and seat the new bin fully on the guides
• Inspect rails and the crisper cover for cracks before reuse
• Hand-wash only; avoid harsh cleaners or high heat that can stress plastics

Replace a cracked or missing drawer cover to restore clean, organized storage in the fresh-food section. This cover sits above the drawer and helps keep items contained with smooth, reliable access.

What it does

• Forms the top cover over a pantry/crisper-style drawer
• Helps contain spills and prevents items from dropping behind the drawer
• Restores smooth slide-in/slide-out operation when the frame tabs are intact
• Replaces covers with broken corners, warped frames, or missing supports

What’s included
One drawer cover (tray cover).

Install notes

• Remove the drawer, lift out the damaged cover, and seat the new cover on its supports—do not force
• If your model uses a separate glass insert, handle carefully and transfer only if applicable
• Reinstall the drawer and verify smooth travel and full seating on the rails

Crisper drawer cover frame assembly for refrigerators. Supports and guides the crisper drawer for smooth sliding. Replace if cracked, broken, or warped.

Rear trim cover that conceals and protects your TV's internal support area. Replace this cosmetic piece if cracked, broken, or missing to restore appearance.

Decorative trim panel that finishes the front opening of your refrigerator. Replace this outer trim piece if cracked, scratched, or missing to restore appearance.

Cosmetic trim piece that finishes the mounting area on your bottom-mount refrigerator. Replace a cracked, broken, or missing cover to restore a clean fit.

Clear glass shelf for refrigerator interior storage. Replace your cracked, shattered, or broken shelf to restore organized food storage space.

Replaces a cracked, broken, or missing Fresh Room drawer tray assembly in your refrigerator. Restores the dedicated deli storage compartment for organized access.

Replace your worn refrigerator door gasket to restore an airtight seal, prevent cold air loss, and improve energy efficiency. Verify fit with your model.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Small stopper that fits inside the handle assembly to limit travel and keep the handle properly seated. Replace if worn, missing, or broken to restore secure feel.

Replacement drawer guide rail for refrigerators and freezers. Installs along the drawer track to restore smooth sliding when original is cracked or worn.

Replacement door basket for refrigerator door. Holds bottles, jars, and condiments securely. Replace if cracked, broken, or missing to restore organization.

Replacement door basket that snaps into the refrigerator's inner door to hold condiments, bottles, and small items. Restores storage when the original is cracked or missing.

Clear plastic door basket for bottom-mount refrigerator fresh food compartment. Replace broken, cracked, or missing door bins to restore organized storage.

Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.

Replace your broken or damaged refrigerator door handle assembly. Installs on the exterior door. Needed when handle is cracked, loose, or missing.

Slide rail for bottom-mount refrigerator freezer drawer. Replaces broken, binding, or worn rails that prevent drawer from opening or closing smoothly.

Slide rail for bottom-mount refrigerator freezer drawers. Replaces broken, cracked, or binding rails causing uneven drawer movement or closure issues.

Fixes intermittent cooling or component failures caused by loose or damaged wiring connections. This connector assembly restores secure electrical links.

Center hinge assembly for bottom-mount refrigerators. Connects and supports doors between freezer and fresh food compartments. Replace if cracked or broken.

Adjusts refrigerator door height for proper alignment and sealing. Replace if door doesn't close easily or seal correctly. Verify fit with model number.

Upper left door hinge for refrigerators. Secures and aligns the top of the door to the cabinet. Replace if hinge is bent, cracked, or damaged.

Upper right door hinge for bottom-mount refrigerators. Mounts at the top of the door. Replace if cracked, broken, or when reversing door swing.

Cosmetic trim piece that snaps over the door hinge to conceal hardware and protect from dust. Replaces cracked, broken, or missing hinge covers.

Center hinge assembly for bottom-mount refrigerators. Mounts between upper and lower doors to support door alignment. Replace if cracked or broken.

Exterior trim panel that covers the front control area of your refrigerator. Replace if cracked, scratched, discolored, or missing to restore appearance.

Covers and protects the refrigerator hinge assembly. Replace this plastic cover if cracked, broken, or missing to restore a clean appearance.

Replacement door hinge bushing for refrigerators. Installs in door hinge mechanism. Replace when worn, cracked, or causing door grinding or misalignment.

Machinery compartment cover assembly for refrigerators. Protects internal components at the back. Replace if cracked, broken, or missing to restore proper coverage.

Refrigerator roller wheel for leveling and mobility. Replaces worn, cracked, or broken rollers that prevent smooth movement or proper leveling.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Refrigerator not cooling? This compressor overload protector prevents motor overheating by cutting power when current spikes. DIY-friendly repair.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Fix erratic temperature readings or sensor errors with this PTC sensor cover. Shields the sensor from debris and damage. Simple 5-minute snap-on repair.

Fix refrigerator vibration and rattling noise with this compressor damper. Cushions the compressor to reduce metal-on-metal contact and wear.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Secures the drier assembly to the refrigerator frame. Replace if the clip is cracked, broken, or missing to restore stability and reduce movement.

Hearing rattling or excessive noise from your fridge? This fan guide assembly stabilizes airflow and reduces noise caused by an unsteady evaporator fan.

Motor running loud or vibrating excessively? This motor mounting bracket secures the motor to the cabinet, reducing vibration and noise for stable operation.

Refrigerator not cooling or making loud noises? The compressor base assembly secures and stabilizes the compressor. Moderate DIY repair with basic tools.

Fix loud grinding noise or warm freezer with this evaporator fan assembly. Circulates cold air between compartments. 15-minute repair for most DIYers.

This freezer shroud covers internal freezer components in your refrigerator. Replace if cracked, broken, or missing to restore proper appearance.

Replacement crisper drawer for bottom-mount refrigerators. Installs in the fresh food compartment to store fruits and vegetables. Needed when cracked or broken.

Fix refrigerator not cooling, display issues, or cycling problems with this main control board replacement. Restores proper temperature management.

Fix a refrigerator that won't turn off the light when the door closes with this magnetic door switch. Simple DIY repair for most home refrigerators.

If your refrigerator is noisy or not cooling evenly, the evaporator fan motor may need replacement. 15-30 minute repair requires freezer panel removal.

Reduce refrigerator rattling and humming from the compressor area. This damper absorbs vibration between the compressor and base for quieter operation.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.

Replace your refrigerator's LED light assembly when the interior lighting is broken, cracked, or no longer illuminating. Installs inside the compartment.

Refrigerator not cooling or making clicking sounds? The compressor run capacitor provides electrical boost to start and run the compressor motor reliably.

Refrigerator won't power on or loses power intermittently? This power cord assembly replaces frayed or damaged cords to restore safe, reliable operation.

Refrigerator not cooling? This compressor overload protector prevents motor overheating by cutting power when current spikes. DIY-friendly repair.

Refrigerator not cooling or freezer icing up? The defrost heater sheath melts frost buildup. Common fix for bottom-mount models. Moderate DIY repair.

Refrigerator not cooling properly or freezer icing up? This evaporator fan motor circulates cold air throughout your unit. Moderate DIY repair.

Control panel unresponsive or erratic? This protective cover shields your refrigerator's circuit board from moisture and debris. Straightforward install.

Refrigerator not cooling or display not working? This main power control board manages power distribution and electronic functions between controls and components.

Replace your refrigerator's light cover assembly when cracked, yellowed, or broken. Protects the interior bulb and ensures proper lighting. Verify fit with your model number before ordering.

Ice maker stopped producing ice or cycles too slowly? This complete ice maker assembly replaces a faulty unit. DIY-friendly installation in 10-15 minutes.

Fix warm fridge temperatures or frost buildup with this door foam gasket. Creates an airtight seal to keep cold air in and moisture out.

Ice maker not working or leaking water? This inlet valve assembly controls water flow to your ice maker and dispenser. DIY install in 30 minutes or less.

Rail connector for refrigerator shelves and drawers. Replace if cracked, broken, or missing to restore proper rail alignment and support functionality.

Refrigerator hose clamp band secures water lines and hoses. Replace if cracked, loose, or causing leaks. Verify fit with your model number before ordering.

Fix a refrigerator not cooling properly or running too warm with this temperature sensor. Monitors internal temps to maintain proper cooling.

Freezer not cooling below 24°F or refrigerator running too warm? This defrost thermostat sensor monitors temperature and signals the control board.

Removes impurities and contaminants from water and ice. Replace every 6 months or 200 gallons for clean, fresh-tasting water. Verify fit by model.