Parts for Frigidaire 40522286A: Fresh Food Doors Parts

The Fresh Food Door Gasket is an OEM replacement part for Frigidaire refrigerators. It creates a seal around the refrigerator door to maintain a consistent temperature by keeping cold air in and warm air out. This helps ensure proper refrigerator conditions and prevents energy loss.

Over time, gaskets can degrade due to wear, exposure to extreme temperatures, or cleaning with harsh chemicals. A damaged or worn gasket may fail to seal properly, affecting the freezer's efficiency and potentially leading to increased energy consumption.

Symptoms of a bad gasket include:

• Frost or ice buildup inside the refrigerator
• Difficulty keeping the refrigerator door fully closed
• Warm air entering the refrigerator, causing temperature fluctuations
• Increased energy bills due to inefficient operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

NOTE: GASKET NOW GRAY, NOT WHITE

The Fresh Food Door Gasket is an OEM replacement part for Frigidaire refrigerators. It creates a seal around the refrigerator door to maintain a consistent temperature by keeping cold air in and warm air out. This helps ensure proper refrigerator conditions and prevents energy loss.

Over time, gaskets can degrade due to wear, exposure to extreme temperatures, or cleaning with harsh chemicals. A damaged or worn gasket may fail to seal properly, affecting the freezer's efficiency and potentially leading to increased energy consumption.

Symptoms of a bad gasket include:

• Frost or ice buildup inside the refrigerator
• Difficulty keeping the refrigerator door fully closed
• Warm air entering the refrigerator, causing temperature fluctuations
• Increased energy bills due to inefficient operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

NOTE: GASKET NOW GRAY, NOT WHITE

This replacement door assembly restores a damaged or bent refrigerator door so it closes properly and helps maintain correct internal temperature. Installs as a complete door to replace worn, dented or broken factory doors. What it does:

• Replaces a cracked, dented or warped door to restore proper door fit and seal
• Helps stop cold air loss and reduces temperature swings that can cause food spoilage
• Restores proper hinge alignment and smooth opening/closing
• Resolves issues with visible damage or cosmetic wear on the appliance exterior

• Disconnect power and empty door shelves before starting
• Support the door while removing hinge fasteners; two people may be required for safe handling
• Inspect and reuse or replace door gasket and hinge hardware as needed

This complete door assembly replaces a damaged or dented appliance door to restore appearance and function. It provides the outer panel and inner liner needed for a factory-style door replacement. What it does:

• Replaces a bent, dented, or cracked door panel to restore a flush, finished exterior
• Restores the inner liner and mounting surfaces for secure hinge and latch alignment
• Helps re-establish proper sealing and insulation where door damage causes gaps or drafts
• Stops cosmetic issues like chipped paint or visible impact damage from worsening

• Designed to install using the appliance's original hinges and fasteners; refer to the service manual for disassembly/reassembly steps
• Disconnect power and remove contents from the appliance before starting work
• Handle the door carefully to avoid damage to the finish and to protect internal liners and wiring
• If hinge hardware, gaskets, or fasteners are damaged, replace them separately.

The Door Stop is an essential OEM replacement part for Frigidaire bottom-mount refrigerators. It functions to securely hold the refrigerator door fully open during loading and unloading of food items. 

Causes of a faulty door stop include cracking or warping due to years of resisting door closure force during access. Friction might also wear down moving lever components over time.

Symptoms of a bad door stop are:

• Refrigerator door unable to safely prop fully open  
• Door slowly closing partially while items are retrieved
• Visible wear marks or loss of lubrication where door pivots

This authentic OEM replacement is compatible for Frigidaire, Electrolux and Kenmore models. 

This door stop is the replacement part that limits door travel and cushions the refrigerator door for smoother closing and reduced impact. It helps restore proper door alignment and prevents the door from hitting the cabinet. What it does:

• Stops or limits door travel to prevent over-opening and cabinet damage
• Cushions door movement to reduce slamming and wear on hinges
• Helps maintain correct door alignment so the seal engages properly
• Commonly used when the door hangs unevenly, slams, or won't stay aligned

• Disconnect power or unplug the appliance if accessing electrical components is required.
• Support the door or remove it before replacing hinge or stop hardware.
• Basic hand tools usually required; keep track of small screws and clips.
• Test door operation and alignment after installation; adjust as needed.

This door handle is a direct-replacement for a refrigerator/freezer door, restoring a secure grip and smooth opening action. It replaces a worn, cracked, or broken handle so the door can be opened safely and easily. What it does

• Provides a sturdy grip for opening and closing the refrigerator/freezer door
• Restores proper leverage if original handle is cracked, loose, or damaged
• Helps prevent door slippage and accidental drops while loading or unloading
• Matches the factory mounting points for a straightforward fit

• Disconnect power to the appliance or ensure doors are stable before starting.
• Remove the damaged handle and retain any factory screws/fasteners; install using the factory mounting points.
• Use the correct-size screwdriver; do not overtighten fasteners to avoid cracking the handle.

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

Replace the worn bearing that supports your refrigerator's ice-dispenser auger. This bearing helps the auger spin smoothly so cubes travel to the chute, restoring steady ice dispensing and reducing grinding or jamming.

• Supports the auger shaft within the ice bin/dispenser assembly
• Enables smooth rotation to move ice toward the chute
• Wear can cause slow or failed dispensing and squealing/grinding noises
• Fixes issues with a cracked, worn, or seized auger support

• Disconnect power and remove the ice bin before servicing
• Separate the bin front/cover and auger assembly; note the bearing's orientation
• Transfer the new bearing and reuse existing screws/retainer if present
• After reassembly, confirm the auger turns freely by hand before restoring power

This is the refrigerator door bin that mounts into the inner door liner to hold bottles, condiments, and jars. Replace a cracked or missing bin to restore secure storage and keep items organized and accessible.

• Provides dedicated storage on the door and keeps items contained during opening and closing
• Replaces a cracked, broken, or loose bin
• Common symptoms: bin falls off, won't stay seated, is missing, or is damaged
• Restores original door storage capacity and organization

• Remove all items from the old bin; disconnect power if working near interior lights or controls
• Lift the old bin straight up to release it from the door liner tabs or rails
• Align the new bin with the same location and press down until it seats firmly
• Do not force; if it doesn't seat, install it in the same position as the original

This replacement door bin is a molded shelf that mounts to the inside of a refrigerator door to hold bottles, jars and other refrigerated items for easy access and organization. It restores lost storage and helps keep door contents secure. What it does:

• Provides a stable shelf for bottles, condiments and small containers on the fridge door
• Replaces cracked, broken or missing door storage that lets items fall or shift
• Restores proper spacing so door seals and interior organization work as intended
• Fits into existing door bin rails or snap-mount locations to lock in place

• Remove all items from the door and lift out the damaged bin before installing the replacement
• Align the bin with the door rail or mounting studs and press or slide it into the slots until it snaps or seats fully
• No special tools usually required; unplug the appliance before working near electrical components
• Inspect door rails and mounting points for damage and replace if worn to ensure a secure fit

This replacement door bin restores lost or broken storage on the refrigerator door so bottles, condiments and small containers snap back into place. Durable molded plastic keeps items secure and organized. What it does:

• Provides a stable shelf inside the refrigerator door for bottles, jars and small items
• Replaces cracked, chipped or missing door storage that no longer holds items securely
• Restores proper fit and alignment with existing door rails and brackets
• Helps prevent spills and shifting of stored items during door opening and closing

• Remove items from the door and lift or unhook the old bin from the door rails before installing
• Align the bin with the door rails and press firmly until it snaps into place; verify it is seated evenly
• Do not force the bin past resistance; inspect rails and brackets for damage before installing
• For safety, avoid working on powered components and keep hands clear of pinch points

This part number contains one (1) screw.

The Door Handle Screw is an OEM part for Frigidaire refrigerators. This screw secures the door handle to the refrigerator door, ensuring a firm and stable grip for opening and closing the door.

Causes of a bad door handle screw can include regular wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or stripping. A faulty screw can lead to a loose or wobbly door handle, making it difficult to operate the refrigerator.

Symptoms of a bad door handle screw include:

• The door handle feeling loose or coming off
• Difficulty in securely tightening the handle
• Visible rust or corrosion on the screw
• Stripped threads on the screw or handle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Hinge Pin is an OEM part for Frigidaire refrigerators. It is responsible for supporting the mullion or flapper, which is the vertical strip that divides the refrigerator doors. It provides smooth movement and proper alignment of the mullion, allowing it to pivot easily for access to both compartments while maintaining an airtight seal when closed.

Causes of a bad hinge pin can include wear and tear over time, accidental damage, or improper handling. A damaged or worn-out hinge pin may result in difficulties in opening or closing the mullion.

Symptoms of a bad Hinge Pin include:

• Difficulty in opening or closing the doors
• Excessive play or wobbling of the mullion
• Failure to maintain a proper seal between door
• Unusual noises during use

This OEM Frigidaire part can also be used on select Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore models.

This mullion assembly is the vertical center trim that attaches between refrigerator doors to improve appearance and help direct the door seal for proper closing. It replaces a damaged, cracked or missing mullion and restores the door interface. What it does

• Covers the gap between French/side-by-side style doors and provides a finished center trim.
• Helps align and protect the door edges where seals meet to maintain a tighter door interface.
• Restores appearance by replacing cracked, broken or discolored mullion trim.
• Can reduce drafts or light entering between doors when the original mullion is damaged.

• One mullion assembly as shown

• Disconnect power to the appliance and remove interior items from the top shelf/door area before starting.
• Installation typically requires removing door trim or screws along the mullion—handle door panels carefully to avoid damage.
• Keep original fasteners; replace only the components shown. If mounting hardware is missing, obtain exact fasteners before installing.

This mullion assembly is the vertical door trim that covers the gap between refrigerator doors and provides a finished appearance while helping maintain a tighter seal. Replacing a cracked or warped mullion restores the look and reduces drafts. What it does

• Covers the vertical gap between doors and provides a finished trim piece.
• Helps maintain an improved door seal and reduces cold-air leakage around the door edge.
• Prevents visible damage or gaps that can allow moisture, frost, or odors into the cabinet.
• Restores proper door alignment appearance when the original mullion is dented, cracked, or warped.

• One mullion assembly.

• Disconnect power to the appliance before removing door panels or working near electrical components.
• Remove any door bins/trim as needed, then unfasten mounting screws or clips holding the mullion and lift out; reverse to install.
• Use care to avoid scratching door surfaces; gently align and seat clips/screws so the trim sits flush.

The Right Door Closer is an OEM part for Frigidaire refrigerators. It is responsible for ensuring that the refrigerator door closes securely and maintains a proper seal, keeping the cold air inside and your food fresh.

A bad right door closer can be caused by wear and tear, damage, or misalignment. When the closer becomes faulty, it can result in issues such as a loose or sagging door, difficulty in closing the door properly, or a compromised seal that leads to temperature fluctuations.

Symptoms of a bad right door closer include:

• Door not closing or sealing properly
• Condensation or frost buildup inside the refrigerator
• Noisy or squeaking door operation

Replace your faulty right door closer with this genuine OEM part to restore your refrigerator door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This left-hand door closer replaces the refrigerator/freezer door closer that helps the door swing closed smoothly and stay aligned for a proper seal. Restores reliable closing and reduces door sag or misalignment. What it does:

• Guides and supports the left-side door as it closes to prevent slamming and ensure proper latch engagement
• Helps maintain an even seal to preserve internal temperature and reduce energy loss
• Reduces door sag, rubbing, or uneven gaps caused by worn or broken closers
• Works with the existing hinge/door hardware to control door motion

• High-level replacement — remove the door trim/inner panel to access the closer if required
• Keep screws and brackets organized; verify orientation for left-hand side before fastening
• Disconnect power to the appliance or follow manufacturer's safety guidance when working near electrical components

This small rubber door bumper cushions and aligns the refrigerator door to reduce slamming and wear. It restores smooth closing and helps keep the door sealed for proper cooling. What it does:

• Absorbs impact when the door closes to prevent hard bangs and protect cabinet surfaces
• Keeps the door properly spaced to help maintain a consistent seal
• Reduces rattling or vibration caused by loose or worn bumpers
• Simple, low-profile part used at door contact points or stops

• One replacement bumper

• Power is off if working near electrical components; follow appliance safety precautions
• Remove the old bumper by pulling it from its mounting hole; press the new bumper firmly into place until seated
• Use gloves to protect your hands; avoid using excessive force or tools that could damage trim
• Replace with the exact OEM part number for proper fit and function

This water connector links sections of the refrigerator's water supply tubing, maintaining a sealed path to the dispenser and ice maker. Replace a cracked or leaking connector to stop drips and restore reliable water flow and ice production.

• Connects sections of internal water tubing between components (inlet valve, filter, door, ice maker)
• Helps maintain a sealed route for proper dispenser and ice maker operation
• Common symptoms: water leaking behind/under the refrigerator, weak/no dispenser flow, ice maker not filling, visible damage at the fitting
• Direct-fit component built to OEM specifications for the intended application

• Unplug the refrigerator and shut off the household water supply before servicing
• Dispense water to relieve line pressure; place a towel to catch residual water
• Cut tubing ends square and fully insert into the connector until seated; tug gently to confirm engagement
• Restore water, check carefully for leaks, and recheck after the first dispense cycle