Parts for Ge GFSS6KKYDSS: 02 - Fresh Food Doors Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This is a self-tapping screw used to secure appliance panels and small components. It provides a reliable hold in sheet metal and plastic mounting points to restore proper fit and prevent rattling or loose parts. What it does:

• Fastens trim, brackets, and light-duty panels where a tapped hole is needed
• Creates its own threads in thin metal or plastic mounting points
• Helps stop vibration-related noise by securing loose panels
• Commonly used during repairs of control panels, inner liners, and external trim

• One tapping screw as shown

• Use the correctly sized screwdriver or bit to avoid stripping the head
• Drive straight and stop when snug; over-tightening can strip the mating material
• Turn power off and unplug the appliance before accessing internal panels
• If the original hole is damaged or oversized, consider using a slightly larger fastener or repair insert per manufacturer guidance

This magnet assembly secures the refrigerator door gasket for a tight, even seal to help keep interior temperatures stable and reduce energy loss. It replaces a worn or damaged magnetic strip assembly on compatible refrigerator doors. What it does:

• Provides magnetic holding force along the door edge to help the gasket seal properly
• Helps prevent warm air infiltration that can cause frost buildup or inconsistent cooling
• Restores proper door closure if a weakened or detached magnet is the cause
• Works as the magnetic component that mates with the cabinet flange to keep the door closed

• One replacement magnet assembly

• Disconnect power to the appliance before beginning any repairs
• Remove the door gasket or trim as required to access the magnet assembly
• Align the magnet assembly carefully and secure per OEM instructions to ensure an even seal

This magnet assembly replaces the magnetic strip that helps the refrigerator door seal stay tight, improving door closure and helping the appliance maintain proper temperature and efficiency. What it does:

• Replaces the magnetic sealing strip in the door gasket to help the door stay closed
• Restores a strong door seal to reduce cold air loss and limit frost buildup
• Helps prevent warm-air leaks that can cause the compressor to run more often
• Addresses symptoms such as a door that won't fully latch, visible gaps at the seal, or excessive frost in the freezer

• Disconnect power to the appliance before beginning any work
• Remove door trim or gasket; the magnet may snap or slide into a channel or require adhesive
• Handle the gasket and magnet carefully to avoid tearing or misalignment; ensure the magnet sits evenly along the door edge

This is the door gasket for the refrigerator (fresh food) compartment. It creates an airtight seal around the door to keep cold air in, reduce moisture, and help maintain proper temperatures.

• Seals the fresh food door perimeter to prevent air leaks
• Helps reduce condensation, frost, and temperature swings
• May help if the door won't seal, the gasket is torn, or food is warming
• A worn or deformed gasket can increase run time and energy use

• Unplug the appliance before service
• Warm the new gasket (hair dryer on low or warm water) to relax folds
• Transfer any retainers if applicable; seat the gasket fully into the channel
• Check door alignment and adjust hinges if needed for proper seal

This side door handle assembly is made for use on refrigerators. This component is used to open and close the refrigerator door. There are two of these handles on each refrigerator unit. One goes on the freezer door and the other on the refrigerator door. This part only includes one handle.This component is held into place with screws. If the screws and the handle become stripped, a new handle will be needed. The replacement process is easy and only requires a screwdriver. Since the door will need to be open during this process, make sure that any food that will deteriorate is placed in a temperature-safe location.The side door handle assembly is compatible with refrigerators that are manufactured by both GE and Samsung brands. It is sold individually and is a genuine OEM part that has been sourced directly from the manufacturer.

This upper door bin restores secure, usable storage on your refrigerator door. Replace a cracked, loose, or missing bin to keep bottles and condiments organized and to help prevent items from tipping or falling when the door moves.

• Provides a dedicated shelf on the door for jars, bottles, and condiments
• Replaces a broken, warped, or missing bin to maintain proper fit and function
• Helps keep items upright and reduces spills during door opening/closing
• Common symptoms: cracked bin, won't stay seated, falls off, or missing bin

What's included: 1 upper door bin Install notes:

• Disconnect power and remove items from the affected door area
• Lift the old bin straight up to release it from the door liner tabs/slots
• Align the new bin at the upper position and press down until both ends snap in evenly
• Verify the bin is fully seated and secure before reloading items

This is a black French door trim assembly that restores the exterior appearance and proper sealing of compatible French-door refrigerators. It replaces worn or damaged trim to help doors close evenly and maintain a clean, finished look. What it does:

• Replaces damaged or cracked trim on a French-style refrigerator door
• Restores proper edge alignment so doors close and seal more reliably
• Improves cabinet appearance by covering exposed edges and hardware
• Helps prevent drafts and moisture intrusion along the door perimeter

• Intended for appliance technicians or experienced DIYers; disconnect power and empty door before beginning
• Basic hand tools typically required; support the door during removal/installation to avoid strain
• Inspect adjacent seals and hardware while installing; replace any worn gaskets or fasteners separately
• Follow manufacturer instructions for torque and alignment to ensure correct closing and sealing

The Mullion (White) is an OEM part for GE refrigerators. This is the vertical strip that helps seal the space between the French doors, ensuring an airtight closure when the doors are shut. 

Causes of a bad mullion can include physical damage from impacts, wear and tear from regular use, or issues with the pivot or hinge mechanisms that allow it to fold and seal properly.  

Symptoms of a bad mullion include:

• Doors not closing properly
• Visible gaps between the French doors
• Increased condensation or frost buildup around the door edges
• Higher energy consumption due to inefficient sealing

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This refrigerator door gasket seals the edge of a French-door fridge to help keep cold air in and warm air out, reducing frost and helping the appliance maintain stable temperatures and efficient operation. What it does:

• Creates an airtight seal along a French-door refrigerator edge to prevent air leaks
• Helps reduce frost buildup and condensation by keeping cold air inside
• Can stop temperature fluctuations that cause food spoilage
• Often shows problems as visible gaps, a torn or warped seal, or difficulty keeping the door fully closed

• Inspect and clean the door margin and gasket seating area before installation to ensure a proper seal
• Handle the gasket carefully; align evenly and avoid stretching or pinching during installation
• Follow the refrigerator manufacturer's instructions and use the correct fasteners or retainers if required

The French Door Spring Pin is an OEM part for GE refrigerators. It plays a crucial role in the proper functioning of the refrigerator's French doors by ensuring they close securely and smoothly. This spring pin helps maintain the alignment and tension of the doors, contributing to the overall efficiency and usability of the appliance.

You should replace this French door spring pin if it becomes damaged or fails. Causes of a bad spring pin can include wear and tear over time, accidental damage, or corrosion due to exposure to moisture.

Symptoms of a bad French door spring pin include:

• Difficulty in closing the refrigerator doors
• Doors not staying securely closed
• Misalignment of the French doors
• Unusual noises when opening or closing the doors

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a French spring, or French divider door spring. It is used in refrigerators. This part allows the doors to open and close. It is located in the door of the fridge. A new French divider door spring may be needed if the door is stuck or is coming off of its hinges. This repair requires only a standard household toolkit. To replace the spring simply remove the old one and replace the part with a new, working piece. Be sure not to bend the spring while installing it as it will not fit in as the replacement part. This is a genuine OEM part. It is sourced directly from the manufacturer and is sold individually. This specific French Divider Door Spring is compatible with appliances made from General Electric.

This ice chute cap gasket seals the ice chute cap to help keep ice contained and reduce air or moisture intrusion in the dispenser area. It restores a tight, flexible seal for proper ice dispensing and storage. What it does:

• Seals around the ice chute cap to help prevent ice spills and migration
• Limits warm air and moisture from entering the ice compartment
• Helps reduce ice clumping and sticking by maintaining a stable chute seal
• Restores proper fit where a worn or torn gasket allows gaps

• Disconnect power to the appliance before inspecting or replacing the gasket
• Remove the chute cap carefully, clean mating surfaces, and press new gasket fully into place for an even seal
• Inspect surrounding trim for damage and handle the gasket gently to avoid tears
• If adhesive or fasteners are present on your model, use only OEM-recommended methods

This dispenser cover assembly replaces the plastic trim that surrounds a refrigerator ice/water dispenser, restoring a clean appearance and protecting internal dispenser components from dirt and damage. It helps keep the dispenser area sealed and functioning as intended. What it does:

• Covers and protects dispenser controls, chute and internal components from spills, debris and wear
• Provides a finished, stable surface for dispensing ice or water
• Prevents gaps that can cause chipping or rubbing of items against the dispenser opening
• Common fix for cracked, broken, faded or loose dispenser trim

• One dispenser cover assembly

• Disconnect power to the appliance before beginning work to avoid electrical or mechanical hazards
• Remove any screws or retainers securing the old cover; handle plastic parts carefully to avoid cracking
• Test dispenser operation after installation and ensure all fasteners are secure

Color: White

Color: Black

This is an ice chute and funnel assembly for refrigerators with ice dispensers on their doors. The chute opens upon the user's command input and releases ice into a glass or other container placed underneath it. With use, because of misuse, or as a result of accidental damage, part or all of the ice chute door and funnel may malfunction or fail entirely. When this happens, a replacement part is required to continue using the ice dispensing feature.If the ice chute no longer dispenses ice, or if it is dispensing too much or too little ice, it's a good indication that there is something wrong with this part of the appliance. It's a quick repair. It is always recommended to unplug the device before beginning the replacement. Move any food that could spoil while the repair is being completed.This refrigerator ice dispenser ice chute door and funnel assembly is a genuine OEM replacement part. It is sourced directly from the manufacturer. It is sold as an individual unit and made of durable materials. The replacement part is compatible with several models of refrigerators manufactured by General Electric, Hotpoint, and RCA.

This right-side refrigerator door foam assembly replaces worn or damaged insulation inside the door to help restore a proper seal and reduce condensation or frost at the door edge. Fits behind the door liner to support even closing and temperature retention. What it does:

• Replaces the factory foam insulation inside the right refrigerator door
• Restores proper door fit and helps reduce cold air loss at the door edge
• Helps minimize condensation, frost buildup, and uneven cooling near the door
• Supports the inner door liner for consistent closing and alignment

• Disconnect power to the appliance before beginning any service
• Access requires removing the inner door liner or door panel—keep fasteners and trim organized
• Handle foam and liner components carefully to avoid tearing or damaging the liner surface
• After installation, check door alignment and seal; adjust hinges or hardware if needed

This cam engages the door hinge to give a refrigerator door a controlled, self-closing action that helps keep the door shut and maintain internal temperatures. It's a direct-fit hinge cam used where the OEM calls for an auto-close cam. What it does:

• Guides the hinge to provide a smooth, late-stage self-closing action for the door
• Helps prevent doors from being left ajar, which can cause temperature loss or spoiled food
• Restores proper door alignment and closing feel when a worn cam causes sticking or drift
• Works as the hinge cam in assemblies designed for an auto-close mechanism

• One cam, auto close (right door hinge) as shown

• Designed to replace the original hinge cam; follow the appliance manufacturer's hinge/disassembly instructions
• Turn off power and remove food from the door area if work affects sealed compartments; unplug if required by model
• Handle edges and spring/tensioned hinge parts with care; springs can release suddenly

A self-tapping screw used to fasten appliance panels and components where a threaded hole is formed as the screw is driven. Provides a secure hold for trim, brackets, and light assemblies during repairs. What it does:

• Cuts its own mating thread in sheet metal or thin plastic to secure panels and brackets
• Helps hold trim, access panels, or internal components in place
• Commonly used where a tapped hole is not present or repair requires a replacement fastener
• Can prevent loose parts and rattles caused by missing or damaged screws

• Unplug the appliance before servicing to avoid electrical or mechanical hazards
• Use the correct screwdriver or bit to avoid stripping the screw head
• Start the screw straight and apply steady pressure; do not overtighten to avoid cracking plastic or stripping metal
• Replace only with the exact part number to ensure proper fit and function