Parts for Ge PFSF6PKXCBB: 02 - Fresh Food Doors Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This magnet assembly secures the refrigerator door gasket for a tight, even seal to help keep interior temperatures stable and reduce energy loss. It replaces a worn or damaged magnetic strip assembly on compatible refrigerator doors. What it does:

• Provides magnetic holding force along the door edge to help the gasket seal properly
• Helps prevent warm air infiltration that can cause frost buildup or inconsistent cooling
• Restores proper door closure if a weakened or detached magnet is the cause
• Works as the magnetic component that mates with the cabinet flange to keep the door closed

• One replacement magnet assembly

• Disconnect power to the appliance before beginning any repairs
• Remove the door gasket or trim as required to access the magnet assembly
• Align the magnet assembly carefully and secure per OEM instructions to ensure an even seal

This magnet assembly replaces the magnetic strip that helps the refrigerator door seal stay tight, improving door closure and helping the appliance maintain proper temperature and efficiency. What it does:

• Replaces the magnetic sealing strip in the door gasket to help the door stay closed
• Restores a strong door seal to reduce cold air loss and limit frost buildup
• Helps prevent warm-air leaks that can cause the compressor to run more often
• Addresses symptoms such as a door that won't fully latch, visible gaps at the seal, or excessive frost in the freezer

• Disconnect power to the appliance before beginning any work
• Remove door trim or gasket; the magnet may snap or slide into a channel or require adhesive
• Handle the gasket and magnet carefully to avoid tearing or misalignment; ensure the magnet sits evenly along the door edge

This refrigerator door gasket seals the edge of a French-door fridge to help keep cold air in and warm air out, reducing frost and helping the appliance maintain stable temperatures and efficient operation. What it does:

• Creates an airtight seal along a French-door refrigerator edge to prevent air leaks
• Helps reduce frost buildup and condensation by keeping cold air inside
• Can stop temperature fluctuations that cause food spoilage
• Often shows problems as visible gaps, a torn or warped seal, or difficulty keeping the door fully closed

• Inspect and clean the door margin and gasket seating area before installation to ensure a proper seal
• Handle the gasket carefully; align evenly and avoid stretching or pinching during installation
• Follow the refrigerator manufacturer's instructions and use the correct fasteners or retainers if required

The French Door Spring Pin is an OEM part for GE refrigerators. It plays a crucial role in the proper functioning of the refrigerator's French doors by ensuring they close securely and smoothly. This spring pin helps maintain the alignment and tension of the doors, contributing to the overall efficiency and usability of the appliance.

You should replace this French door spring pin if it becomes damaged or fails. Causes of a bad spring pin can include wear and tear over time, accidental damage, or corrosion due to exposure to moisture.

Symptoms of a bad French door spring pin include:

• Difficulty in closing the refrigerator doors
• Doors not staying securely closed
• Misalignment of the French doors
• Unusual noises when opening or closing the doors

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a French spring, or French divider door spring. It is used in refrigerators. This part allows the doors to open and close. It is located in the door of the fridge. A new French divider door spring may be needed if the door is stuck or is coming off of its hinges. This repair requires only a standard household toolkit. To replace the spring simply remove the old one and replace the part with a new, working piece. Be sure not to bend the spring while installing it as it will not fit in as the replacement part. This is a genuine OEM part. It is sourced directly from the manufacturer and is sold individually. This specific French Divider Door Spring is compatible with appliances made from General Electric.

This ice chute cap gasket seals the ice chute cap to help keep ice contained and reduce air or moisture intrusion in the dispenser area. It restores a tight, flexible seal for proper ice dispensing and storage. What it does:

• Seals around the ice chute cap to help prevent ice spills and migration
• Limits warm air and moisture from entering the ice compartment
• Helps reduce ice clumping and sticking by maintaining a stable chute seal
• Restores proper fit where a worn or torn gasket allows gaps

• Disconnect power to the appliance before inspecting or replacing the gasket
• Remove the chute cap carefully, clean mating surfaces, and press new gasket fully into place for an even seal
• Inspect surrounding trim for damage and handle the gasket gently to avoid tears
• If adhesive or fasteners are present on your model, use only OEM-recommended methods

A self-tapping screw used to fasten appliance panels and components where a threaded hole is formed as the screw is driven. Provides a secure hold for trim, brackets, and light assemblies during repairs. What it does:

• Cuts its own mating thread in sheet metal or thin plastic to secure panels and brackets
• Helps hold trim, access panels, or internal components in place
• Commonly used where a tapped hole is not present or repair requires a replacement fastener
• Can prevent loose parts and rattles caused by missing or damaged screws

• Unplug the appliance before servicing to avoid electrical or mechanical hazards
• Use the correct screwdriver or bit to avoid stripping the screw head
• Start the screw straight and apply steady pressure; do not overtighten to avoid cracking plastic or stripping metal
• Replace only with the exact part number to ensure proper fit and function