Parts for Ge CGP350SET4SS: Gas & Burner Parts

Fix uneven flames or poor burner performance with this cooktop burner orifice spud. Controls propane gas flow for correct flame size. Direct-fit part.

Fix weak flames or ignition problems with this LP gas orifice spud. Controls propane flow to restore proper burner performance. Simple 10-minute fix.

Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.

Weak or uneven oven flame? This orifice spud secures the gas orifice to your burner tube, restoring proper gas flow and steady combustion in gas ovens.

Plugged orifice causing ignition problems? This LP gas orifice regulates propane flow to your cooktop burner for proper flame size and reliable ignition.

Gas burner won't light or flame is uneven? This orifice spud secures the burner orifice to direct fuel properly for consistent ignition and flame control.

Simmer burner won't maintain low flame? This orifice spud restores proper gas flow for gentle, even cooking on low heat. Direct-fit part for gas cooktops.

If your cooktop buzzer won't stop sounding or has gone silent, this 120V buzzer restores audible alerts for cycle completion and user notifications.

Secures your cooktop to the cabinet or countertop. Replace if bent, broken, or missing to prevent movement and restore a stable, factory-secure fit.

Burner not igniting or flame uneven? This cooktop burner tube assembly delivers gas to the burner head. Moderate install, typically 30-45 minutes.

Fix uneven flames or burner not igniting with this cooktop burner tube assembly. Restores proper gas flow to burner heads for consistent heating.

Burner won't light or flames are uneven? This cooktop burner tube assembly delivers gas from the valve to the burner head. Moderate DIY repair.

Controls incoming gas pressure for your cooktop. Replace if cracked, broken, or missing. Installs at the gas line connection point at the unit base.

Fix burners that won't ignite or turn off with this cooktop gas valve. Controls gas flow to burners for safe cooking. Moderate DIY repair, 30-45 minutes.

Fixes knob won't turn or turns freely without resistance. Controls gas flow to burners. Moderate difficulty repair, requires cooktop disassembly.

The Dual Valve is an OEM part for GE gas cooktops. It is a key component responsible for controlling the flow of gas to the dual burner.

Causes of a bad dual valve can include wear and tear over time, freezing or other weather damage, or issues from debris buildup or clogging.

Symptoms of a bad dual valve include:

• Inability to turn burners on or off
• Burners that will not light or that light but with an unstable flame
• Inconsistent or irregular flame size that cannot be controlled
• Gas leaks from the valve area

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Center burner not heating? This dual burner valve controls gas flow to your cooktop's power boil element. Direct-fit part restores even heating.

Burner knob hard to turn or flame won't adjust? This gas valve controls flow to the burner. Moderately difficult repair restores smooth operation.

The Spark Module is an OEM part for GE cooktops. Located within the cooktop's control unit, this module is responsible for generating electric sparks to ignite the burners. Consisting of electronic components and wiring, the spark module works with other systems to reliably and safely light the gas or electric burners.  

Symptoms of a bad spark module include:

• Burners not lighting or lighting intermittently  
• Repeated flashing of the burner indicator lights  
• Clicking or buzzing sounds coming from the control unit

Causes of a failed spark module can be exposure to moisture, dust or debris accumulating inside the control unit over time as well as mechanical or electrical degradation of the ignition components.

This genuine OEM GE replacement part is also compatible with some Kenmore cooktop models that use GE's control systems.

Fix a blank or unresponsive cooktop display with this LED control board. Restores electronic controls and temperature indicators when your display fails.

If your cooktop burner won't ignite or gas flow is blocked, the valve lockout may need replacement. This repair typically takes 30-45 minutes.

Fix burners not heating or control panel issues with this cooktop wire harness switch. Connects control switches to heating elements. Moderate DIY repair.

If your cooktop controls won't respond or indicator lights stay on constantly, this wire harness restores electrical connections between the control board and components.

Right angle

Gas cooktop supply inlet connects your gas line to the burner manifold. Essential for proper gas flow and pressure. Moderate DIY repair in 30-45 minutes.

Manifold seal prevents gas leaks at the valve connection. Replace if damaged, cracked, or during valve service. Confirm fit with your cooktop model number.

Manifold bracket assembly for cooktops. Secures the gas manifold to the frame. Replace if bracket is cracked, broken, or damaged during servicing.

Fix uneven flames or gas flow issues with this cooktop manifold tube. Essential gas distribution component. Moderate difficulty installation.

Replace your cooktop's griddle burner tube assembly if the griddle isn't heating evenly or won't light. Includes complete tube assembly for reliable heat.

Standoff bumper for ranges, ovens, and cooktops. Installs to provide spacing and support between components. Replace if cracked, broken, or missing.

This range cord supplies main power to an electric range so the appliance can heat and run safely. It replaces a worn or damaged cord to restore reliable power connection and reduce risk of arcing or intermittent power. What it does:

• Transfers mains power from the wall outlet to the range's terminal block
• Restores a secure, stable electrical connection when the original cord is frayed or damaged
• Helps stop sparking, burning smells, or intermittent power caused by a faulty cord
• Supports normal oven and cooktop operation when the outlet and terminal connections are serviceable

• Disconnect power at the breaker before servicing; verify power is off with a meter
• Securely tighten terminal screws and route cord to avoid contact with hot surfaces

Replacement mounting screw for ranges and ovens. Secures panels, brackets, or components during installation. Order a new screw if original is missing or stripped.

Replacement mounting screw for appliances. Secures components and reduces vibration. Needed when original screws are missing, stripped, or damaged.

Replacement screw for securing panels, brackets, and internal components in ranges, ovens, and cooktops. Replace missing, stripped, or damaged screws.

Replacement mounting screw secures panels, brackets, and controls on ranges and ovens. Needed when original screws are missing, stripped, or damaged.

1/4-20 threaded screw secures panels, brackets, and internal assemblies in ranges, ovens, and cooktops. Replace missing, stripped, or corroded fasteners.

Black hex washer screw for securing range components like door trim, control panels, and internal brackets. Replace missing or stripped screws during repairs.

This burner wire harness routes electrical connections to the cooktop/oven burner so the element and ignition systems receive power and operate reliably. It replaces worn or damaged wiring to restore safe, consistent burner function. What it does:

• Delivers power from the control/terminal block to the burner/igniter connections
• Replaces frayed, melted, or corroded wiring that can cause intermittent operation
• Helps stop symptoms such as a burner that won't heat consistently, won't spark/ignite, or works only intermittently
• Maintains correct connector fit and wire routing to avoid shorting or contact with hot surfaces

• Disconnect all power to the appliance before starting any service
• Label or photograph wiring locations and connector orientations to ensure proper reconnection
• Avoid pinching wires; route harness away from sharp edges and hot components

This burner wire harness routes power and signals between the cooktop burner components, helping the igniter and gas valve operate reliably for safe cooking. It replaces a damaged or burned harness to restore proper burner function. What it does:

• Carries voltage to the burner igniter and connects to the burner valve for ignition control
• Restores intermittent or no-spark symptoms caused by cracked, melted, or frayed wiring
• Prevents shorting and arcing that can occur with damaged connector leads
• Maintains correct routing and secure connections for stable burner operation

• Disconnect power and shut off gas supply before starting any service
• Verify OEM connector orientation and routing before removing the old harness
• Inspect nearby components for heat damage and replace if necessary