Parts for Ge JGSS86SP2SS: Gas & Burner Parts

Converting your gas range from natural gas to propane? This LP conversion kit includes all necessary orifices and components for a complete fuel conversion.

Converts your gas range to liquid propane for high-altitude use. Ensures proper gas flow, easy ignition, and stable flames in low-pressure conditions. Confirm fit with your model number before ordering.

Convert your gas range for proper operation above 2000 feet elevation. This high altitude kit adjusts air-fuel mixture for optimal performance at altitude.

Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.

Small mounting bracket secures components beneath your cooktop surface. Replace if damaged, bent, or missing to restore proper alignment and stability.

Surface burner base that covers and protects the burner cavity on gas ranges. Replace if warped from heat, cracked from impact, or corroded over time.

Fix wobbly control knobs or valves not turning properly with this gas range switch harness. Connects burner controls to valve assembly.

If your ice maker isn't filling properly or ice cubes are misshapen, this inlet jet restores correct water flow to the dispenser and ice-making area.

Fix uneven or smoky burner flames with this gas range burner injector. Restores proper gas flow for even heating. Simple DIY installation.

Gas range orifice holder secures burner orifices for proper gas flow. Replace if damaged, cracked, or causing uneven flames. Confirm fit with model number.

1/4-20 threaded screw secures panels, brackets, and internal assemblies in ranges, ovens, and cooktops. Replace missing, stripped, or corroded fasteners.

Left rear orifice holder for gas ranges. Secures the gas orifice in place. Replace if cracked, broken, or missing to restore proper burner assembly.

If your right-front burner won't ignite, has a weak or uneven flame, or gas flow is inconsistent, this orifice holder secures the burner orifice.

Right rear burner won't ignite or flame is uneven? This orifice holder secures the burner orifice for proper gas flow and stable ignition.

Fix weak or uneven flames on your gas range center burner. This orifice holder secures the orifice to the valve for proper gas flow and ignition.

Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.

Replace a gas range bake burner if your oven won't heat or bakes unevenly. This repair typically takes 30-45 minutes with basic hand tools.

Weak or uneven broiling? This tubular broil burner restores concentrated high-heat performance for even browning and crisping in gas range ovens.

Fix burners that won't light, adjust, or maintain flame. This valve regulates gas flow to individual cooktop burners. Moderate DIY repair with hand tools.

Fix a burner that won't turn off or has a stiff knob with this gas range burner valve. Controls gas flow to individual burners. DIY repair takes 1-2 hours.

Fix burners that won't ignite or have uneven flames with this gas range valve and burner assembly. Controls gas flow and flame intensity for each burner.

Fix weak or uneven flames on your gas range. This burner valve controls gas flow and flame distribution. Common repair for seized or faulty valves.

90° elbow assembly redirects fluid or discharge lines at a right angle on your gas range. Replace if cracked, broken, or worn to restore secure connections.

90-degree elbow assembly for gas ranges. Connects gas supply lines at right angles. Replace if cracked, damaged, or leaking to ensure proper gas flow.

90-degree elbow assembly that directs exhaust airflow through the oven ventilation path. Replaces cracked, damaged, or broken elbows to restore proper venting in your range.

If knobs feel loose or debris gets into burner controls, this valve seal prevents spills from entering the valve stem area. Simple 5-minute fix.

Gas range burner won't light or has weak flame? This manifold supply tube routes gas from the valve to the burner. Moderate DIY repair restores ignition.

Fix an oven that won't heat or takes too long to ignite. This glowbar igniter generates the pilot flame for your gas range's bake burner. DIY-friendly repair.

Range not heating properly or gas flow issues? This dual safety valve controls gas to two burners, restoring safe operation. Moderate DIY repair.

Fix an oven that won't heat or takes too long to preheat with this gas range oven igniter glow bar. Common DIY repair, moderate difficulty.

Oven won't heat or takes forever to preheat? A faulty igniter is the most common cause. This hot surface igniter glows to light your gas burner reliably.

Gas leaking behind your range or burners won't shut off completely? The pressure regulator controls gas flow to safe levels. DIY-friendly repair.

Burner won't light or gas leaks? This safety valve controls gas flow to individual burners, restoring safe operation. Moderate DIY repair for gas ranges.

This air deviator routes and directs cold airflow inside the refrigerator to balance temperatures between compartments and improve cooling performance. It restores proper air distribution when the original piece is cracked or misaligned. What it does:

• Redirects chilled air from the evaporator to the correct compartment to help maintain even temperatures
• Helps prevent warm spots caused by blocked or misdirected airflow
• Works with the fridge's air circulation path to support normal cooling cycles
• Common symptom: uneven cooling or air bypass near the evaporator cover

• One air deviator

• Inspect and replace only when the existing deviator is broken, warped, or missing
• Handle plastic parts gently to avoid cracking; align tabs before snapping into place
• Always unplug the appliance before accessing internal panels or components
• No special tools typically required;