Parts for Ge PGB940SEJ2SS: Gas & Burner Parts

This LP high-altitude conversion kit adapts select gas cooking appliances for liquid propane use at elevation. It properly meters gas flow so burners light easily and produce clean, stable flames in thin-air conditions.

• Configures the appliance for LP operation in high-altitude installations
• Calibrates fuel delivery to maintain proper flame size and combustion
• Helps address yellow/sooty flames, flame lift, or hard-to-control simmer after conversion
• Promotes reliable ignition and even heat across burners

• Conversion affects gas type and pressure; must be performed per the manufacturer's instructions and local codes
• Shut off gas and power before service; work in a well-ventilated area away from open flames or sparks
• After conversion, leak-test all connections and adjust air shutters per model guidance if applicable
• Intended for LP high-altitude applications only; use the model-specific kit specified by the manufacturer

The Range NG High Altitude Kit is an OEM part for GE gas ranges. This high-altitude conversion kit allows the range to operate properly at elevations above 2000 feet.

Causes related to needing this kit are using the range at a high elevation without proper adjustment for decreased air pressure and oxygen levels.

Symptoms of needing this high-altitude kit include:

• Unstable or inconsistent flame during operation
• Excessive cooking times
• Incomplete combustion of gas resulting in carbon monoxide issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This economic nut is a small replacement fastening nut that restores secure connections for appliance components. It replaces worn or missing hardware so panels and internal parts stay firmly seated and reduce vibration. What it does:

• Secures components and panels by threading onto the matching stud or bolt to hold assemblies in place
• Prevents loose or rattling panels and hardware caused by a missing or damaged nut
• Restores proper fit for user-accessible panels and internal brackets where this nut is specified
• Simple hardware replacement to regain stable mechanical connections

• Disconnect power and water (if applicable) and follow basic electrical safety before servicing the appliance
• Use the matching size wrench or socket; thread-on by hand first to avoid cross-threading, then snug—do not overtighten
• Inspect mating stud or bolt for damage; replace hardware that is stripped, corroded, or deformed

The Medium surface burner base is an OEM part for GE ranges. It serves as the base for the surface burners, covering and protecting the burner cavities.

Causes of a bad surface burner base include warping or deformation from high heat over time, cracks or breaks from impact damage, or corrosion from liquid spills or grease accumulation.

Symptoms of a bad surface burner base include:

• Burners no longer sitting flush or securely on the cooktop surface
• Excessive air gaps around the burners allowing gas/flames to escape
• Difficulty cleaning due to liquid leaks into the burner cavities
• Visible cracks, breaks, or deformities in the material

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This switch harness connects the range's infinite control switch to the oven's wiring, restoring reliable power and control to a cooktop burner. It's a direct-fit replacement for worn or damaged wiring at the switch. What it does:

• Provides the wiring connection between the infinite/element control switch and the appliance wiring harness
• Restores proper electrical continuity to a cooktop surface control so burners respond to knob settings
• Commonly replaced when burners fail to heat, have intermittent power, or when wiring is visibly damaged
• Helps prevent arcing or short conditions caused by frayed or loose connector wires

• Disconnect power to the appliance at the breaker before beginning any repair
• Inspect surrounding wiring and connectors for heat or damage and replace if necessary
• Use basic hand tools; ensure connectors are fully seated and routed away from hot surfaces

This genuine OEM GE replacement is compatible with additional Hotpoint, RCA and Kenmore gas range models.

This manifold pipe routes gas from the range's valve assembly to the individual cooktop burners, restoring safe and consistent fuel delivery for reliable burner operation. Replace a damaged or corroded manifold to stop leaks and restore proper flame distribution. What it does:

• Channels gas from the control valve block to each burner for ignition and steady flames
• Helps maintain even burner performance and consistent heat across the cooktop
• Failsafe for preventing gas leaks when intact; visible damage, corrosion, or cracks can cause unsafe operation
• Commonly replaced when burners won't light, show weak or irregular flames, or after leak detection

• Turn off the gas supply and unplug the appliance before servicing.
• Inspect and replace any damaged seals, gaskets, or fittings when installing the manifold.
• Test for leaks with a soap solution or approved leak detector after installation; do not use an open flame.

LP orifice spud that meters propane to a single burner for correct flame size and efficient combustion after converting a cooktop or oven to LP. Restores proper burner performance and safer operation. What it does:

• Meters propane flow to one burner to establish the correct flame for LP fuel.
• Used when converting a range or oven from natural gas to propane (LP).
• Helps correct flames that are too large, yellow, uneven, or won't stay lit.
• Replaces a worn, damaged, or incorrect LP orifice spud for improved burner control.

• Shut off the gas supply at the appliance and service valve before servicing.
• Follow OEM conversion instructions.
• After installation, check all gas connections for leaks with an approved method; do not operate the appliance if you detect a gas leak.
• Use only the exact orifice specified for LP conversion—do not substitute unverified parts.

This LP orifice spud meters propane to a burner on compatible gas ranges/cooktops. Replacing a clogged, damaged, or incorrect spud helps restore proper flame size and consistent burner performance after conversion or service. What it does:

• Threads into the gas system to control LP gas flow to the burner
• Corrects flame characteristics after LP conversion when the proper size is used
• Common symptoms of a wrong/failed spud: yellow-tipped flames, flames too high/low, uneven heating, poor simmering
• Helps maintain stable blue flames for efficient combustion on LP

• 1 LP orifice spud

• For LP (propane) use only; do not use with natural gas
• Turn off gas supply and power before servicing; allow the appliance to cool
• Match each burner position to the specified orifice per your model's conversion chart; tighten snugly without overtightening
• After installation, leak-check with a soap solution and verify flame characteristics per the manual

A replacement burner valve cover that protects and conceals the gas valve assembly on compatible ranges, helping keep valve components clear of spills and debris for more reliable burner operation. What it does:

• Covers and protects the gas valve area from food, moisture and spills.
• Helps prevent debris from interfering with valve knobs and internal valve parts.
• Can reduce intermittent ignition or burner performance issues caused by contamination.
• Restores the finished appearance around the valve for safer, cleaner operation.

• Always shut off the gas supply and unplug the appliance before servicing.
• Use basic hand tools; handle the valve area gently to avoid disturbing fittings or tubing.
• After installation, check for gas leaks with a soapy-water solution or a proper leak detector—do not use an open flame.

This 1/4-20 screw secures panels, brackets, and other assemblies in your appliance. It restores a tight, reliable hold when an original fastener is missing, stripped, or corroded.

• Fastens components that require a 1/4-20 threaded screw
• Helps keep panels and assemblies aligned and rattle-free
• Direct replacement for worn, rusted, or lost hardware
• Common symptoms: loose or vibrating parts, misaligned brackets, missing fastener

• Disconnect power; turn off gas supply before servicing
• Allow the appliance to cool; wear gloves and eye protection
• Start threads by hand to avoid cross-threading; use the correct driver/tool
• Tighten snugly—do not overtighten to prevent stripping or damage

This orifice holder secures the gas orifice in the burner tube to ensure stable fuel delivery for consistent burner flames. It replaces a worn or damaged holder to restore correct orifice alignment and flame performance. What it does

• Holds the gas orifice in proper position inside the burner tube for accurate fuel flow
• Helps maintain consistent, even burner flames and reliable ignition
• Common replacement when burners show weak, uneven, or inconsistent flames
• Works with the stove's burner assembly to prevent orifice dislodgement during use

• One orifice holder

• Turn off the range's gas supply and unplug the appliance before starting work
• Remove burner grates and caps, then detach the burner tube to access the holder
• Inspect the orifice and surrounding components; replace the orifice if damaged

The Oven Orifice Spud LP is an OEM part for GE gas ovens. This part controls the flow of liquid propane (LP) gas into the oven burner box. The oven orifice spud plays a role in gas combustion, adjusting flow to match the needs of a liquid propane system. It connects directly to the gas supply, so an improperly sized or damaged spud can lead to gas leaks or incomplete burning.

Causes of a bad oven orifice spud include normal wear over time from constant heating cycles, exposure to cleaning chemicals, or damage during part replacement.

Symptoms of needing a replacement include:

• Uneven or inconsistent oven heating
• Extended cooking times or inability to reach desired temperatures
• Gas smell coming from the oven area
• Visible damage or cracks on the spud itself

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This orifice holder secures the burner orifice to a gas range or cooktop, positioning the orifice for a consistent gas flow and reliable ignition. Replaces a worn or damaged holder to restore correct burner alignment and flame performance. What it does:

• Holds the burner orifice in the correct position so gas flows properly to the burner
• Helps maintain an even, steady flame for consistent cooking performance
• Can resolve burner issues like weak or uneven flames or burners that fail to light
• Prevents orifice movement that can cause inefficient combustion or ignition problems

• One orifice holder

• Turn off the appliance and shut off the gas supply before starting; disconnect power if applicable
• Replace only with the correct OEM part for your model to ensure proper fit and orifice alignment
• Hand-start threads and tighten securely; avoid over-tightening which can damage the holder
• After installation, restore gas and power, then test burners and check for leaks (use a soapy water solution, never an open flame)

The Burner Bake Tube is an OEM part for GE gas ovens and ranges. It acts as the path by which gas travels from the valve to the burner, where it is ignited and the flame produced. 

Symptoms of a bad burner tube include:

• Inability to ignite or extinguish the gas flame properly  
• Burner flames that appear abnormal in color or size
• Decreased gas pressure at the burner resulting in weak flames
• Frequent sensor issues or interrupted baking 

Causes can be cracks in the tubing allowing gas leaks, blockages restricting fuel flow, or permanent damage from overheating. Installing this GE replacement restores efficient combustion ensuring reliable oven or range operation.

Compatible with Hotpoint, RCA, and select Kenmore models as well, replacing yours prevents future troubles from minor issues left unaddressed. 
 

The Igniter Mounting Screw is an OEM replacement part for GE ovens and ranges. This screw secures the igniter to the burner assembly, ensuring it remains firmly in place for consistent and reliable ignition. Its precise fit and durable design help maintain the stability and functionality of the igniter.

Over time, mounting screws can become corroded, stripped, or lost during repairs or maintenance. A missing or damaged screw may result in a loose igniter, affecting the appliance's ability to ignite properly.

Symptoms of a bad or missing igniter mounting screw include:

• The igniter becoming loose or misaligned

• Difficulty securing the igniter during installation or repair
• The burner fails to ignite reliably or consistently
• Increased noise or movement of the igniter during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This orifice spud meters gas to a burner in your range or cooktop. Replacing a clogged or damaged spud helps restore correct flame size and reliable ignition for consistent cooking performance.

• Regulates gas flow from the valve to the burner head for proper combustion
• Helps restore consistent flame height and even heating on the burner
• Sized for the burner rating and fuel type specified by your model; always match the correct part

• Disconnect power and shut off gas supply; allow the appliance to cool completely before servicing.
• Access the burner orifice and replace with the correct, model-specified spud using an appropriate wrench; do not overtighten.
• Restore gas and check all connections for leaks with a soap-and-water solution.
• Use only the spud specified for your fuel type (NG or LP); do not attempt conversion without the approved kit and instructions.

The Orifice Spud is an OEM part for GE ranges and cooktops. It is a small, precise component responsible for regulating the flow of gas to the burner, ensuring a controlled and efficient flame for cooking. This spud is essential for maintaining the correct gas pressure and flame size.

Over time, orifice spuds can become clogged or damaged due to residue buildup, corrosion, or improper cleaning. These issues can lead to inefficient burner performance or safety hazards.

Symptoms of a bad orifice spud include:

• Uneven or weak burner flames
• Difficulty in igniting the burner
• Yellow or flickering flames
• Gas odors near the burner area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Valve and Burner Assembly is an OEM part for GE gas ranges. As the primary mechanism for fuel ignition and burner operation, it works to deliver gas to each burner safely and control flame intensity precisely. 

Symptoms of a bad valve and burner assembly include:

• Inability to light one or more burners
• Unstable, excessively large or small flames  
• Burners that will not maintain the desired heat setting
• Gas leaks around the burner area

Causes can be normal damage over time from heat exposure, cracks developing in valve components, blockages in gas ports, or loose connections. Installing this OEM replacement ensures your range's burners operate efficiently.

This GE part is also compatible with some Hotpoint, RCA, and Kenmore ranges and restores reliable stove-top cooking performance. Replace yours today before minor problems worsen.
 

The Valve Burner is an OEM component for GE gas ranges. Located below the grates atop each cooktop burner, it precisely mixes gas and air to provide controllable flames. A valve adjusts gas flow while perforated metal distributes the flame evenly. 

Symptoms of a faulty valve burner include: 

• Difficulty obtaining or maintaining set flame levels  
• Unstable or intermittent burner operation
• Yellow fire or flame that produces excessive soot
• No ignition or fire when the knob is turned

Causes can be wear of internal valve components, debris, or clogs in gas ports restricting flow over time. Damage from spills or dropped objects may also crack the burner.

This OEM GE burner is also compatible with models from Hotpoint and RCA.

The Burner Valve Assembly 3R 310 is an OEM part for GE gas ranges. It controls gas flow to individual burners to deliver precise heating levels.  

Causes of a bad burner valve assembly include worn rubber diaphragms, debris inside valve channels, or damage from repeated heating cycles.

Symptoms are:

• Uneven cooking temperatures across burners
• Inability to ignite or adjust certain burners  
• Fluctuations in flame height/cooking output

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas range models.

The BURNER VALVE is an OEM part for GE gas ranges. It regulates gas flow to individual cooktop burners, controlling flame size and heat output based on valve position.

Symptoms of a bad burner valve include: 

• Inability to adjust or maintain desired flame levels
• Gas odor or clicking/hissing noises from the burner area  
• Burners that remain constantly on without response to controls

Gas valves can weaken or crack over many heating/cooling cycles. Mineral buildup may also restrict precise flow regulation. Replacing the faulty valve with this genuine GE part restores the burners' heat-adjustable functionality for custom cooking power. 

This OEM GE replacement burner valve is also compatible with some Kenmore and RCA gas range models. Reliable control over burners maximizes versatility and safety.
 

This dual oval orifice holder secures two burner orifices and helps deliver the correct gas flow to the cooktop burners for consistent ignition and stable flames. Replaces a worn or damaged holder to restore proper burner performance. What it does:

• Holds and positions two oval gas orifices so the burner receives correct gas flow
• Restores even flame distribution when the original holder is cracked, bent, or missing
• Helps resolve burner issues like weak, uneven, or inconsistent flames and intermittent ignition
• Keeps orifices aligned to the burner head for reliable lighting and efficient combustion

• One dual oval orifice holder

• Turn off gas supply and power to the appliance before starting any work
• Remove burner grates and caps; handle orifices carefully to avoid damage or misalignment
• Tighten securely but avoid overtightening; inspect surrounding gaskets and seals and replace if damaged

This valve control assembly regulates gas flow to the burner, restoring safe and reliable ignition and heating. Replace a faulty valve control to return proper burner operation and consistent heat output. What it does:

• Controls gas flow to the burner so the appliance can ignite and hold a flame
• Helps the burner reach and maintain proper heat during operation
• Can resolve symptoms like burners not lighting, weak or no flame, or intermittent heating
• Works as the control interface between the appliance's control system and the gas supply

• One valve control assembly

• Turn off gas supply and disconnect power before starting any repair
• Handle the assembly carefully and avoid forcing connectors; ensure wiring and gas fittings are secure
• If you smell gas or suspect a leak after installation, stop immediately
• Follow the appliance manufacturer's service manual for model-specific installation steps and torque specs

A replacement glowbar igniter for gas ovens and ranges that provides the heat element needed to ignite the burner. Restores reliable ignition so the oven can reach and hold the proper cooking temperature. What it does:

• Heats to a high temperature to ignite the oven burner when the gas valve opens
• Replaces a cracked, broken, or weak igniter that won't glow or won't light the burner
• Common symptom: oven burners fail to ignite or oven takes a long time to heat
• Common symptom: igniter does not glow, or ignition clicks repeatedly without lighting

• Disconnect electrical power and shut off the gas supply before servicing
• Allow the appliance to cool fully; the element is fragile—avoid bending or dropping it
• Do not touch the glass/ceramic element with bare hands; oil from skin can shorten life
• Confirm connector type and mounting orientation match the original before final installation

This hot surface oven igniter heats up and lights the gas at the burner. Replacing a weak, cracked, or non-glowing igniter often restores reliable ignition when a gas oven won't heat or preheats very slowly.

• Heats to ignite gas at the oven or broiler burner
• Draws the correct current to open the safety gas valve
• Common symptoms: no heat, intermittent heat, glows but no flame, very slow preheat, no glow at all
• Helps restore consistent burner ignition and temperature recovery

• Disconnect power and shut off gas; allow the appliance to cool completely
• Handle by the base/bracket only—the ceramic element is very fragile
• Reuse original mounting screws; route wires away from the flame path
• After install, verify a steady bright glow followed by burner ignition

This manifold supply tube carries gas from the pressure regulator to the burner valve manifold on your gas range or cooktop. Replacing a damaged tube restores safe, consistent fuel flow for reliable ignition and steady flames.

• Routes regulated gas to the burner valve manifold
• Restores proper fuel flow when the original tube is kinked, cracked, or corroded
• Typical symptoms include weak or no flame, delayed ignition, or a fuel odor near the manifold
• Replace if leaking or visibly damaged

• Disconnect power and shut off the gas supply; allow the appliance to cool.
• Photograph the original routing and fittings before removal; transfer any clips or brackets.
• Route and support the new tube exactly like the original; avoid kinks or sharp bends.
• After reassembly, check all joints with an approved leak-detection solution—never with an open flame.

Package of 12