Parts for Ge PGS920SEF4SS: Gas & Burner Parts

Converts your range from natural gas to liquid propane fuel. Includes necessary orifices and fittings for proper LP operation. Replace when switching fuel types or missing components.

This oven duct and burner box assembly houses the lower burner and channels heat and combustion gases away from internal components to help maintain proper oven operation and safe combustion. It restores correct burner positioning and heat routing. What it does:

• Holds and secures the lower burner in the correct position for reliable ignition and consistent heating.
• Channels combustion gases and hot air away from controls and wiring to protect components.
• Helps prevent heat-related damage and reduces hot spots that can cause uneven baking or broiling.
• Supports proper airflow under the oven floor, which can improve overall temperature stability.

• One duct and burner box assembly.

• Disconnect electrical power and shut off the gas supply before beginning service.
• Installation requires access to the oven cavity and removal of oven floor panels; follow OEM disassembly steps.
• Check for proper alignment and secure all mounting fasteners; inspect seals/gaskets and replace if damaged.
• After installation, restore gas and electrical supply and check for proper ignition and any gas leaks.

Small mounting bracket secures components beneath your cooktop surface. Replace if damaged, bent, or missing to restore proper alignment and stability.

Secures the electronic board or module inside your cooktop. Replace if the bracket is cracked, bent, or missing to prevent component movement and wiring issues.

If your gas range burners won't light or click continuously, this spark ignition switch and harness assembly may need replacement. Moderately easy repair.

Secures the cooktop surface to the range chassis for stable alignment. Replace if bracket is bent, broken, or missing to eliminate looseness and gaps.

If your range burners won't ignite or flames are uneven, the manifold pipe assembly may be corroded or leaking. This part routes gas from the supply line to burners and oven.

Fix improper flames or weak ignition on your range burner with this LP orifice spud. Meters propane flow for correct flame size and safe operation.

Fixes weak or uneven flames on LP gas ranges. This orifice spud meters propane flow to the burner. Easy DIY install restores proper flame size.

1/4-20 threaded screw secures panels, brackets, and internal assemblies in ranges, ovens, and cooktops. Replace missing, stripped, or corroded fasteners.

Orifice holder for gas ranges. Secures the gas orifice in the burner assembly. Replace if cracked, damaged, or missing to properly mount orifice components.

Replacement orifice holder for gas ranges. Secures the gas orifice in place on burner assemblies. Replace if cracked, broken, or missing.

Secures the gas orifice in the center burner assembly of your range. Replace if cracked, broken, or no longer holding the orifice firmly in place.

Replace your range bake burner when oven won't heat, bakes unevenly, or takes too long to preheat. Moderate DIY repair with basic hand tools required.

Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.

Burner orifice spud regulates gas flow to the burner on your range or cooktop. Replace if missing, damaged, or when converting between LP and natural gas.

LP gas orifice spud for converting gas range burners from natural gas to propane. Replace if missing, damaged, or switching fuel types on cooktop.

LP orifice spud meters liquid propane gas to your range burner. Replace when converting from natural gas to LP or if the jet is worn or incorrect.

Weak or uneven flames on your gas range? A clogged or damaged orifice spud restricts gas flow to the burner. Simple replacement restores proper flame size.

Fix burners that won't light, stay on high, or produce uneven flames with this range burner valve assembly. Controls gas flow for precise heat levels.

Fix weak or uneven flames on your gas range. This burner valve controls gas flow and flame distribution. Common repair for seized or faulty valves.

Fix a burner that won't ignite or has uneven flames with this range burner valve. Controls gas flow to restore proper flame size and cooking performance.

Fix a burner that won't turn off or has a stiff knob with this gas range burner valve. Controls gas flow to individual burners. DIY repair takes 1-2 hours.

Replace a burner that won't light or has uneven flames with this range burner injector assembly. Includes orifice for proper gas flow and ignition.

If knobs feel loose or debris gets into burner controls, this valve seal prevents spills from entering the valve stem area. Simple 5-minute fix.

Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.

Replace your range's burner injector assembly if cracked, clogged, or missing. This component connects the gas supply to the burner for proper operation.

Burners won't ignite or flame is weak? This gas valve controls fuel flow to your range burners. Restores reliable ignition and steady flame performance.

Fix an oven that won't light or heat with this igniter glow bar. Common repair for gas ovens that click but don't ignite. Simple 5-15 minute DIY fix.

Oven won't heat or takes forever to reach temperature? This igniter creates the spark to ignite gas for baking. DIY-friendly repair, 20-30 minutes.

Flame deflector for gas ranges. Installs above the burner to direct heat evenly. Replace if cracked, warped, or missing for proper heat distribution.

Single fastening screw for range components. Replaces missing, stripped, or damaged screws that secure panels, brackets, and trim pieces in place.

Stamped metal shield that protects the oven's lower cavity and insulation from excessive heat. Replace if cracked, rusted, corroded, or damaged.

Stainless steel cleaner for gas ranges and cooktops. Restores shine and removes fingerprints, smudges, and streaks from exterior surfaces.

This cover latch secures the appliance's top access cover so it stays closed during use and lets you open the cover for service or maintenance. It restores a positive, smooth-closing latch action for safe access. What it does:

• Holds the top/access cover closed to prevent accidental opening during operation
• Provides a solid engagement point for the cover to snap or latch into place
• Replaces a broken, worn or loose latch that causes rattling or an unsecured cover
• Helps ensure proper alignment of the cover for safe servicing and operation

• Disconnect power (unplug or shut off breaker) before beginning any service
• Typically installs with simple snap-in or screw fasteners; keep fasteners from the original part

Fix uneven heating or burner ignition issues with this range gas tube main dual valve. Connects dual valve system to burners for proper gas flow.

Fix gas smell when range is off with this safety valve lockout clip. Secures gas valve actuator to prevent unintended movement. Simple DIY repair.