Parts for Ge PGS930SEL1SS: Gas & Burner Parts

Converts your gas range to liquid propane for high-altitude use. Ensures proper gas flow, easy ignition, and stable flames in low-pressure conditions. Confirm fit with your model number before ordering.

Converting your range from natural gas to propane? This LP conversion kit includes the orifices and fittings needed for a qualified installer to complete the job.

Convert your gas range for proper operation above 2000 feet elevation. This high altitude kit adjusts air-fuel mixture for optimal performance at altitude.

If your ice maker isn't filling properly or ice cubes are misshapen, this inlet jet restores correct water flow to the dispenser and ice-making area.

Surface burner base that covers and protects the burner cavity on gas ranges. Replace if warped from heat, cracked from impact, or corroded over time.

Fix uneven or smoky burner flames with this gas range burner injector. Restores proper gas flow for even heating. Simple DIY installation.

Gas burner not lighting or flame too weak? Replace the natural gas orifice spud to restore proper gas flow. Quick 15-minute fix for most models.

Fix weak or unstable flames by replacing a clogged or damaged burner orifice spud. Threads into the holder to meter gas flow for reliable ignition.

1/4-20 threaded screw secures panels, brackets, and internal assemblies in ranges, ovens, and cooktops. Replace missing, stripped, or corroded fasteners.

Left rear orifice holder for gas ranges. Secures the gas orifice in place on the burner assembly. Replace if cracked, broken, or missing.

Fix uneven flames or burners that won't light properly with this gas range orifice holder. Common repair for flame control issues. Basic difficulty.

Orifice holder for gas ranges. Secures the burner orifice in place. Replace if cracked, broken, or damaged to ensure proper burner assembly.

Oven not heating evenly or won't reach temperature? This bake burner assembly restores proper heat distribution for reliable baking and roasting performance.

This main dual valve tube routes gas between the oven/range valve assemblies to ensure proper fuel delivery for burner operation. Replaces a damaged or corroded primary gas tube to restore consistent ignition and burner performance. What it does:

• Connects the main dual valve to the manifold and burners for controlled gas flow
• Supports reliable ignition and even flame distribution when properly sealed
• Commonly needed when the tube is bent, cracked, or shows gas leakage
• Used during repairs addressing weak flames, intermittent lighting, or visible damage to the gas tubing

• One main dual valve tube

• Turn off gas supply and electrical power before starting any service
• Inspect fittings and seals; use manufacturer-specified gaskets and thread sealant where required
• After installation, perform a certified leak test and verify correct burner ignition and flame patterns

Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.

Fixes water leaks or low flow to ice maker and dispenser. This 90° elbow connects your range's water line to the fill system. Direct-fit replacement.

Weak or uneven broiling? This tubular broil burner restores concentrated high-heat performance for even browning and crisping in gas range ovens.

This cover ignitor protects the oven or range ignitor assembly and helps keep the ignitor clear of drips and debris for reliable ignition. It's a simple replacement that restores the ignitor's protective shield. What it does

• Protects the ignitor element from spills, grease, and debris that can interfere with ignition
• Helps maintain consistent ignition by shielding the ignitor from direct contact
• Commonly used when the original cover is cracked, warped, or missing
• Can resolve ignition issues caused by physical damage or buildup on the ignitor area

• One cover ignitor

• Disconnect power (and gas supply on gas appliances) before starting any repair
• Handle the ignitor assembly carefully; avoid touching the ceramic or ignitor tip
• Use basic hand tools; ensure the cover seats properly without forcing or cracking it
• After installation, restore power/gas and test the burner or oven according to the appliance manual

Fix burners that won't ignite or have uneven flames with this gas range valve and burner assembly. Controls gas flow and flame intensity for each burner.

Fix weak or uneven flames on your gas range. This burner valve controls gas flow and flame distribution. Common repair for seized or faulty valves.

Burner won't light or flame is uneven? This gas range burner valve controls gas flow to restore reliable ignition and consistent flame on your stovetop.

Fix burners that won't light, adjust, or maintain flame. This valve regulates gas flow to individual cooktop burners. Moderate DIY repair with hand tools.

If your range knob won't stay in position or settings are unresponsive, this rotary selector switch restores precise control. Direct-fit replacement.

Dual oval burner injector for gas ranges. Installs into the center burner assembly. Replace if cracked, clogged, or missing for proper gas flow.

Fix uneven flames or burners that won't light properly with a new orifice spud. This gas range part regulates fuel flow for consistent cooking performance.

Replace your gas range's burner injector assembly if cracked, broken, or worn. Installs in the burner system to restore proper gas flow and function.

Fix uneven flames or burners that won't light properly with this gas range orifice spud. Controls gas flow to burners for proper ignition and flame.

Burner won't light or flame is weak or uneven? This injector assembly meters gas flow from the manifold to restore proper ignition and stable flame.

Burner won't ignite or heat evenly? This dual oval burner assembly restores proper flame distribution. Moderate DIY repair for gas ranges.

Restores proper gas flow when burners won't light or flame is weak. This supply tube connects the valve to the burner for reliable ignition and heat.

Fix pilot lights that won't stay lit or igniters that won't spark. This high voltage electrode and harness assembly restores gas ignition in ranges.

Fix oven ignition issues or gas smell problems with this valve control assembly. Controls gas flow to burners for precise flame regulation.

Fix a gas oven that won't heat or takes too long to preheat by replacing a weak or cracked igniter. This hot surface igniter lights the burner reliably.

Oven won't heat or ignite? A failing igniter is the most common cause. This glow bar igniter heats up and draws current to open the gas valve. Easy DIY fix.

Stamped metal shield that protects the oven's lower cavity and insulation from excessive heat. Replace if cracked, rusted, corroded, or damaged.

Fix F97 error codes and overheating ovens with this cooling fan sensor. Monitors ventilation and temperature control. Moderate difficulty repair.

If your oven shuts off during preheating around 200°F, the tangential blower may be failing. This cooling fan circulates exhaust air from the cavity.

This cover latch secures the appliance's top access cover so it stays closed during use and lets you open the cover for service or maintenance. It restores a positive, smooth-closing latch action for safe access. What it does:

• Holds the top/access cover closed to prevent accidental opening during operation
• Provides a solid engagement point for the cover to snap or latch into place
• Replaces a broken, worn or loose latch that causes rattling or an unsecured cover
• Helps ensure proper alignment of the cover for safe servicing and operation

• Disconnect power (unplug or shut off breaker) before beginning any service
• Typically installs with simple snap-in or screw fasteners; keep fasteners from the original part

Fix complete electrical failure, burners not lighting, or control panel issues with this main wiring harness. Connects all range components. Moderate DIY.

Fix a non-working convection fan or cooling blower with this range blower motor wiring harness. Common repair for ovens with electrical failures.

Routes gas from manifold to burner ports for proper ignition and flame stability. Replace if burners won't light or flames are uneven. Confirm fit with your model.

This air deviator routes and directs cold airflow inside the refrigerator to balance temperatures between compartments and improve cooling performance. It restores proper air distribution when the original piece is cracked or misaligned. What it does:

• Redirects chilled air from the evaporator to the correct compartment to help maintain even temperatures
• Helps prevent warm spots caused by blocked or misdirected airflow
• Works with the fridge's air circulation path to support normal cooling cycles
• Common symptom: uneven cooling or air bypass near the evaporator cover

• One air deviator

• Inspect and replace only when the existing deviator is broken, warped, or missing
• Handle plastic parts gently to avoid cracking; align tabs before snapping into place
• Always unplug the appliance before accessing internal panels or components
• No special tools typically required;