Parts for Ge PGS960EEL1ES: Gas & Burner Parts

Need to switch your gas range from natural gas to propane? This LP conversion kit restores proper burner function and safe operation when converting to liquid propane fuel.

Converts your gas range to liquid propane for high-altitude use. Ensures proper gas flow, easy ignition, and stable flames in low-pressure conditions. Confirm fit with your model number before ordering.

Convert your gas range for proper operation above 2000 feet elevation. This high altitude kit adjusts air-fuel mixture for optimal performance at altitude.

Surface burner base that covers and protects the burner cavity on gas ranges. Replace if warped from heat, cracked from impact, or corroded over time.

Fix uneven or smoky burner flames with this gas range burner injector. Restores proper gas flow for even heating. Simple DIY installation.

1/4-20 threaded screw secures panels, brackets, and internal assemblies in ranges, ovens, and cooktops. Replace missing, stripped, or corroded fasteners.

Left rear orifice holder for gas ranges. Secures the gas orifice in place on the burner assembly. Replace if cracked, broken, or missing.

Fix uneven flames or burners that won't light properly with this gas range orifice holder. Common repair for flame control issues. Basic difficulty.

Orifice holder for gas ranges. Secures the burner orifice in place. Replace if cracked, broken, or damaged to ensure proper burner assembly.

This main dual valve tube routes gas between the oven/range valve assemblies to ensure proper fuel delivery for burner operation. Replaces a damaged or corroded primary gas tube to restore consistent ignition and burner performance. What it does:

• Connects the main dual valve to the manifold and burners for controlled gas flow
• Supports reliable ignition and even flame distribution when properly sealed
• Commonly needed when the tube is bent, cracked, or shows gas leakage
• Used during repairs addressing weak flames, intermittent lighting, or visible damage to the gas tubing

• One main dual valve tube

• Turn off gas supply and electrical power before starting any service
• Inspect fittings and seals; use manufacturer-specified gaskets and thread sealant where required
• After installation, perform a certified leak test and verify correct burner ignition and flame patterns

Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.

Replace a gas range bake burner if your oven won't heat or bakes unevenly. This repair typically takes 30-45 minutes with basic hand tools.

Weak or uneven broiling? This tubular broil burner restores concentrated high-heat performance for even browning and crisping in gas range ovens.

Fix burners that won't ignite or have uneven flames with this gas range valve and burner assembly. Controls gas flow and flame intensity for each burner.

Fix weak or uneven flames on your gas range. This burner valve controls gas flow and flame distribution. Common repair for seized or faulty valves.

Burner won't light or flame is uneven? This gas range burner valve controls gas flow to restore reliable ignition and consistent flame on your stovetop.

Fix burners that won't light, adjust, or maintain flame. This valve regulates gas flow to individual cooktop burners. Moderate DIY repair with hand tools.

If your range knob won't stay in position or settings are unresponsive, this rotary selector switch restores precise control. Direct-fit replacement.

Burner won't light or flame is weak or uneven? This injector assembly meters gas flow from the manifold to restore proper ignition and stable flame.

Burner won't ignite or heat evenly? This dual oval burner assembly restores proper flame distribution. Moderate DIY repair for gas ranges.

90° elbow assembly redirects fluid or discharge lines at a right angle on your gas range. Replace if cracked, broken, or worn to restore secure connections.

90-degree elbow assembly for gas ranges. Connects gas supply lines at right angles. Replace if cracked, damaged, or leaking to ensure proper gas flow.

90-degree elbow assembly that directs exhaust airflow through the oven ventilation path. Replaces cracked, damaged, or broken elbows to restore proper venting in your range.

Fix F97 error codes and overheating ovens with this cooling fan sensor. Monitors ventilation and temperature control. Moderate difficulty repair.

Fix pilot lights that won't stay lit or igniters that won't spark. This high voltage electrode and harness assembly restores gas ignition in ranges.

Fix an oven that won't heat or takes too long to preheat with this gas range oven igniter glow bar. Common DIY repair, moderate difficulty.

Range not heating properly or gas flow issues? This dual safety valve controls gas to two burners, restoring safe operation. Moderate DIY repair.

Fix an oven that won't heat or takes too long to ignite. This glowbar igniter generates the pilot flame for your gas range's bake burner. DIY-friendly repair.

Oven won't heat or takes forever to preheat? A faulty igniter is the most common cause. This hot surface igniter glows to light your gas burner reliably.

If your oven shuts off during preheating around 200°F, the tangential blower may be failing. This cooling fan circulates exhaust air from the cavity.

Gas leaking behind your range or burners won't shut off completely? The pressure regulator controls gas flow to safe levels. DIY-friendly repair.

Burner won't light or gas leaks? This safety valve controls gas flow to individual burners, restoring safe operation. Moderate DIY repair for gas ranges.

Fix a non-working convection fan or cooling blower with this range blower motor wiring harness. Common repair for ovens with electrical failures.

This air deviator routes and directs cold airflow inside the refrigerator to balance temperatures between compartments and improve cooling performance. It restores proper air distribution when the original piece is cracked or misaligned. What it does:

• Redirects chilled air from the evaporator to the correct compartment to help maintain even temperatures
• Helps prevent warm spots caused by blocked or misdirected airflow
• Works with the fridge's air circulation path to support normal cooling cycles
• Common symptom: uneven cooling or air bypass near the evaporator cover

• One air deviator

• Inspect and replace only when the existing deviator is broken, warped, or missing
• Handle plastic parts gently to avoid cracking; align tabs before snapping into place
• Always unplug the appliance before accessing internal panels or components
• No special tools typically required;