Parts for White Outdoor 21AA414E290 / 2008: Handle & Tine Shield 410 Parts

This hex washer screw is a genuine OEM replacement part for a variety of household and outdoor appliances. A hex washer screw is a self-piercing screw with an attached washer at the head of the screw. Self-piercing screws are quite sharp and feature a twin-lead thread to screw into a surface more effectively. The built-in hexagonal washer helps to balance weight and force throughout the connection and prevent breakage. Hex washer screws can become damaged over time through repeated stress or tension. Their threading can become stripped or the head can eventually snap off. Replacing a hex washer screw is simple as long as you have the right tool. The unique shape of the screw head makes it incompatible with a flathead or Phillips head screwdriver. Instead, replacing this type of screw requires a unique hex head screwdriver. This part is compatible with Yard Machines, MTD, Yard Man, Troy-Bilt, and Craftsman products and will fit lawn mowers, tractors, snowblowers, vacuums, and chippers. This is a high-quality replacement part sourced from the original manufacture and ships independently of any other hardware.

This part is a replacement foam handle grip for lawn mowers and tillers. It is a piece of foam that fits over the metal handle of the lawn mower or tiller. The foam handle grip provides cushioning for the person operating the equipment. Using a lawn mower or tiller with a worn or missing foam handle grip can cause hand discomfort, blistering, fatigue, and more. The foam grip may wear out, crack, or tear over time or with heavy use. The foam handle grip may also degrade through exposure to extreme weather conditions, such as heat, rain, wind, and cold. A visual inspection can help determine whether it is time to replace the foam handle grip. If the foam handle grip is worn, cracking, or torn, it should be replaced. To replace the foam handle grip, take apart the handle of the lawn mower or tiller. Then, remove the old grip. Finally, lubricate the handle or the inside of the new grip. This will make it easier to get the new grip onto the handle. Once the new grip is in place, reassemble the handle of the lawn mower or tiller. This foam handle grip is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with lawn mowers and tillers made by Craftsman, Cub Cadet, Ryobi, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut.

This part is a replacement handle plug. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or broken handle plug in tillers.This handle plug ensures that the opening at the end of the handle is sealed properly. This part can easily become worn, detached, or lost and thus will require replacement with a genuine part. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this handle plug, the appropriate owner's manual and equipment diagrams should be referred to. This handle plug is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with tiller models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This replacement part is a throttle knob. This part is a genuine replacement part made by MTD. This part is typically found in lawn mowers and assists the user in controlling the throttle of the machine properly. The throttle then adjusts the settings inside the engine so that the user is able to control the speed and power of the appliance. A new throttle knob might be needed if the current one is damaged or missing in any way. It is possible that over time this part might become worn down with normal wear and tear and need to be replaced. This part is made of durable plastic and should be fairly simple to replace. This throttle knob is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit and long-lasting use.

The cotter pin is a fastener that is commonly used in lawn and garden equipment. The cotter pin helps provide a secure, locking fit that is adjustable and easy to remove. The cotter pin is commonly used on axles and rods, but it can have many applications depending on the machine and model. Cotter pins can become worn or break down over time because they are exposed to constant vibrations. It is important to replace damaged or broken cotter pins immediately as a broken part can render the equipment useless in many cases. This cotter pin is designed to exact OEM standards by MTD, and is designed for use in various equipment from MTD, Troy-Bilt, Craftsman, RYOBI, Yard Machines, Hard Man, Poulan, Husky, Bolens, and Cub Cadet. This is a 5/16 cotter pin that features a #34 diameter, and is made of a durable metal. This part is sold individually and those who require more than one will have to order multiple quantities. No other hardware is included. Always wear gloves when working on lawn and garden equipment.

This genuine replacement part is a MTD flat washer flange sized .339 X .640 inch X .033 inch. This MTD flat metal washer flange has a variety of applications for many types of equipment including lawn mowers, snow blowers, tillers, edgers, and log splitters. Washers are important to the proper functioning of the product. They spread the load of a threaded fastener, such as a bolt or nut, or can be used as a spacer. However, they can often wear down or become damaged through extended normal use and may not last the full life cycle of the product, leading to improper operation. This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. This MTD flat washer flange has multiple applications in a wide range of products from Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery, Wards, Bolens, Yard-Man, Turf King, MasterCut, and more. Please note: original part number 166763 is now obsolete, and manufacturer has replaced the original part number with this part.

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

This replacement part is a tiller flap intended for use on lawn mowers. It protects the user and equipment from flying debris that might cause harm during use.A new tiller flap might be needed if the current one is missing or damaged at all. This can include the part being torn, bent, or cracked in any way. This part can be damaged after years of normal wear and tear and should be replaced if this is the case. Be sure the engine is powered off before attempting to replace or repair this part. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This hex screw is an authentic OEM replacement part sourced directly from the manufacturer. It is used in many different applications in lawn and garden equipment and can be used on many different machines. If the hex screw is missing or loose due to deterioration, a new hex screw should be installed. Hex head screws are removed and replaced using a hex wrench. Screws are used to secure one part of a machine to another part. This hex head screw is not self-tapping, it is designed for pre-drilled holes. Most applications will require a washer and bolt to secure the screw, but there are applications where the screw is inserted into parts that do not have an opening on the other side and so the screw does not need to bolt. Wear gloves when working with screws and outdoor equipment. This hex head screw is made of hardened metal and is sold as an individual unit. This hex head screw can be used on many different model machines manufactured by MTD, Ryobi, Murray, YardMan, Bolens, Cub Cadet, and Husky.

This flat washer is a genuine MTD part, sold individually. This flat washer can be used as a replacement part in lawnmowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers. The purpose of a flat washer for one of these small engine outdoor appliances is to prevent friction between one or more components while also creating spacing between components.The flat washer in a small engine outdoor appliance is a very small component that can be easily lost or misplaced at any point during its typical lifespan. The flat washer could also suffer damage during the course of general use, and if the damage to the flat washer precludes it from reducing friction and spacing one or more components, the flat washer should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This flat washer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Yard-Man, Turf King, and MasterCut.

This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.

This part is a replacement wing nut knob. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current knob is broken, defective, or has become detached, this part can be used as a replacement. It is intended for use with several different types of small engine power equipment.This knob functions as a standard wing nut and has multiple different applications depending on the type and model of equipment it is intended to be used for. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this wing nut knob, the appropriate owner's manual and equipment diagrams should be referenced. This wing nut knob is suitable for use on a variety of paint sprayer, yard vacuum, tiller, and spreader models manufactured by MTD, Craftsman, and Yard Machines. It is a genuine OEM part and thus is made of high-quality, durable plastic. Part sold individually.

This is a genuine washer lock that is designed to be used in various applications on lawn and garden equipment. It is a standard piece of hardware that provides a strong seal and distributes pressure between the two connected components. Because of the exposure to high pressure and vibrations, these washers can become damaged or broken over time. If they are not replaced promptly, the connection between the two different parts may be affected. These washers are small and can also get lost while doing other repairs, so it may be helpful to keep some extras on hand. This genuine OEM lock washer is manufactured to exact standards and is compatible with several lawn and garden machines from Husky, Cub Cadet, MTD, RYOBI, Yard Machines, Troy Bilt, Yard Man, and Bolens. It can be used with over 150 models of tractors, blowers, cultivators, trimmers, and snowblowers. Consult the parts diagram for the exact location(s) and application(s) of this washer. Replacing this washer will require a screwdriver or socket set to attach the screws or bolts that the washer is securing. Always wear gloves for hand protection when replacing engine components like this lock washer.

This is a quality clevis pin that is made for many types of lawn and garden equipment. It secures two components together. A clevis pin has a hole at the end where a cotter pin can be attached to secure it in place. Clevis pins can become damaged or corroded over time, which will require them to be replaced.If a damaged clevis pin is difficult to remove, it can be sprayed with penetrating oil and allowed to sit for several hours. This should make it easier to remove the cotter pin from the clevis pin. If it doesn't budge, use a pry bar to loosen the clevis pin.This is an authentic OEM replacement clevis pin directly sourced from the manufacturer. It is sold as a single pin. The clevis pin is designed to be used with lawnmowers, tillers, and snowblowers manufactured by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Husky, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

This is a replacement depth bar for a tiller. The depth stake is a metal bar that attaches vertically to the back of the tiller. It can be adjusted to limit the tiller's forward motion, which in turn allows the machine to dig more deeply into the ground to break up the soil. The depth bar is especially useful when working in hard, compacted ground. When used properly, the depth bar allows the tiller to break the soil into smaller pieces. Alternatively, the depth stake can be raised, or even removed when the soil conditions are softer. The depth bar is easily and conveniently adjusted to till to the desired level.The depth bar may break with normal use, or if it hits hard objects in the soil. Luckily, removal and replacement of the depth stake is very easy. All it takes is a socket wrench to remove the nut and bolt, the torsion spring, and then ultimately the depth bar. This repair can be done in a matter of minutes. This is a genuine OEM replacement depth bar and is sold individually. It is built to work with multiple tillers, including various models made by Ryobi, MTD, Yard Machines, and Yard Man.

This is a durable rubber clutch cable that is used on lawn and garden tillers. It is used to connect the drive system to the clutch control arm in the equipment. It is an important component that controls the clutch to engage the machine. Over time, the clutch cable can break or become damaged and will need to be replaced. If a visual inspection shows that the clutch cable is broken, the first step is to remove the clutch handle. Take out the bolt on the cover plate for the arm. Take the old cable off of the handle and remove the cover plate. Loosen the screws so the old clutch cable can be removed. Remove the screws on the cover over the clutch and belt. Take off the old cable and attach the new one to the clutch. Tighten the screws and reassemble the parts and make adjustments before using the new cable.This clutch cable is a genuine OEM replacement component sourced directly from the manufacturer. It is sold as an individual part. This cable is compatible with tillers manufactured by MTD, Huskee, MasterCut, and Yard Machines.