Parts for Frigidaire GRQC2255BF0: Ice & Water Dispenser Parts

This guide helps a refrigerator drawer or bin slide smoothly and stay aligned, restoring stable movement and preventing binding. It's a simple replacement that improves drawer tracking and reduces noise from misalignment. What it does

• Guides the drawer/bin along its track to maintain proper alignment.
• Reduces rubbing, catching, and uneven movement when opening or closing.
• Helps prevent drawer jams and uneven wear on adjacent components.
• Works as the replacement guide component for the original factory slide assembly.

• Remove power to the appliance and empty the drawer before beginning work.
• Usually installs with simple clips or screws; keep fasteners from the old part for reuse if intact.
• Inspect mating tracks and rollers for damage or debris and clean before installing the new guide.

This dispenser assembly replaces the refrigerator's front dispenser unit to restore reliable water and ice dispensing and control functions. It provides the main housing and actuator interface for the dispenser area. What it does:

• Routes water and ice from the internal supply to the exterior dispenser chute
• Provides the push/lever/actuator interface that engages dispenser switch mechanisms
• Helps prevent leaks around the dispenser opening when properly installed
• Restores proper alignment and operation of the dispenser chute and user controls

• One dispenser assembly

• Disconnect power and shut off the water supply before starting
• Installation typically requires removing the refrigerator door panel and disconnecting electrical and water connections
• Inspect door gaskets and dispenser seals; replace if damaged to prevent leaks

This control panel overlay replaces a worn or damaged console faceplate to restore clear labels and appearance on your appliance. It protects the underlying controls and helps make the console easy to read and use again. What it does:

• Provides the printed graphics and button labels for the console so controls are easy to identify
• Covers and protects the underlying control board and buttons from spills, dirt, and wear
• Restores a factory appearance when original graphics are faded, scratched, or peeling
• Can resolve issues where worn or damaged markings make the controls hard to read

• One control panel overlay

• Disconnect power to the appliance before starting any work
• Remove the console trim or control panel per your model's service instructions to access the overlay
• Handle the overlay carefully to avoid creasing or damaging printed graphics; replace any adhesive or mounting clips as needed

This paddle assembly replaces a broken or worn dispenser paddle to restore easy activation of the fridge's water or ice dispenser. Durable molded plastic design that snaps into the dispenser housing for reliable daily use. What it does:

• Acts as the user-operated paddle that engages the dispenser switch to deliver water or ice
• Replaces cracked, loose, or unresponsive paddles that don't fully activate the dispenser
• Helps stop leaks and misalignment that can occur if the paddle is broken or missing
• Restores a solid, tactile feel when pressing the dispenser

• One paddle assembly

• Disconnect power to the appliance and shut off the water supply before servicing
• Remove the dispenser bezel or trim to access the paddle assembly per the manufacturer's instructions
• Snap the new paddle into the housing, ensuring proper engagement with the dispenser switch and alignment with surrounding trim
• Test dispenser operation after reinstalling trim; if dispenser still fails, inspect switch and wiring.

This display board is the user-facing control console circuit that shows settings and communicates touch/press inputs to the appliance, restoring visible temperature, mode and timer readouts for proper operation. What it does

• Powers and illuminates the appliance's front display and indicator lights.
• Registers and sends button/touchpad commands to the main control for cycle selection.
• Can resolve symptoms like a blank or flickering display, unresponsive or erratic controls, or missing timer/clock readouts.
• Works with the appliance's control system to show error codes and status messages when faults occur.

• One display board (exact OEM replacement; mounts and connectors as original)

• Disconnect power at the breaker or unplug the appliance before starting work.
• Handle the board by the edges and avoid static discharge; use grounded protection if available.
• Reconnect wiring exactly as found; take a photo before removal to ensure correct reassembly.

This replacement electrical switch controls power to a specific function in your appliance. By opening or closing the circuit, it lets the selected feature turn on and off reliably when you actuate the control.

• Completes or breaks the circuit to start/stop its assigned component
• Restores responsive on/off or selector operation at the control
• Common failure symptoms: feature won't start or won't shut off, intermittent operation, loose/stuck actuator, or heat discoloration on the old switch
• Used in control, console, or door areas depending on model design

• Disconnect appliance from power before servicing
• Access the switch location per your model; remove knob/panel if applicable
• Photograph wire positions and note terminal labels (COM/NO/NC) if present; transfer wires one at a time to the new switch
• Secure mounting, ensure tight connectors, reassemble, restore power, and test operation

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

This tension spring provides the restoring force needed for a moving refrigerator component, helping parts return to their normal position for reliable operation and alignment. It's a simple replacement that restores proper movement and stability. What it does:

• Provides tension to return or hold a component in place during normal operation
• Helps maintain proper alignment and smooth movement of the associated mechanism
• Worn or broken springs can cause improper latching, sagging, or uneven movement
• Replacing a damaged spring often resolves related noise or binding issues

• One replacement spring

• Disconnect power before attempting any repairs to avoid electrical hazards
• Handle springs carefully; they can be under tension and may require basic tools to remove/install
• Replace with the exact part number to ensure fit and function

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling