Parts for Husqvarna 136LE: Muffler / Crankshaft / Carburetor Parts

This part is a replacement intake connector. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a defective or broken intake connector in various models of chainsaws.The intake connector is what ensures that the carburetor and the air filter housing are securely attached to one another. This part should be replaced with a genuine OEM part if broken or faulty in any way. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this intake connector, the appropriate owner's manual and equipment diagrams should be referred to. This intake connector is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with chainsaw models that have been manufactured by MTD, Craftsman, and other brands.

The carburetor gasket helps to form a seal between the carburetor and the carburetor adapter. It will ensure there are no leaks and that air does not pass through the connection. If there are performance issues or leakage near the carburetor, the culprit could be the carburetor gasket. Additionally, whenever a carburetor is replaced, this gasket must also be replaced. This is because there is a chance that a reused gasket will not reseal properly. If the reused gasket or the new gasket is not installed and seated properly, there is a chance that it could let dirt into the engine. It could also let in extra air, which could lead to damage to the engine. It is important to properly maintain a chainsaw and to replace O-rings and gaskets whenever they show signs of wear and tear. This OEM part will work with a range of models, including Craftsman, Husqvarna, Poulan, and Poulan Pro. This is sold as an individual replacement part.

This replacement air filter is an authentic OEM part for a Husqvarna chainsaw. The air filter is mounted just before the carburetor so that air entering into the engine is free of dust or debris. If particulate matter were to enter the engine, it would contaminate the fuel and create more widespread damage throughout the mechanics. This filter consists of both a plastic casing and a foam filter. After roughly two or three months of regular use, an appliance's air filter will reach its maximum capacity. If left unchecked, the air filter will become so clogged that air will no longer pass into the engine. This would cause the engine to perform poorly as the fuel would not combust as easily. However, changing an air filter is easy as most filter housings just pop open. At most, this might require a screwdriver or wrench. While the filter housing is open, be sure to remove any detritus that may have collected around the filter. This replacement filter is compatible only with Husqvarna chainsaws. As such, it comes sourced from the original manufacturer. This part ships individually.

This muffler bolt is an OEM replacement part that is sourced directly from the manufacturer. These bolts secure the muffler cover to the muffler on chainsaws, trimmers, and other small engines found in lawn and garden machines. Regular use can cause the bolts to loosen and possibly fall out of the cover. The muffler cover requires two bolts to secure it. These bolts have a hexagon-shaped head and require a hex key or Allen wrench to install or remove them from the cover.The muffler on small engines softens the noise coming from the machine. Being exposed to loud noise for long periods can lead to hearing damage. The muffler helps lessen this risk. The muffler cover protects the inner parts of the muffler. Rain, snow, dirt, and debris can cause rust and corrosion. Use the Allen key or hex wrench to loosen the muffler bolt if it is rusted or bent. Install the new bolt and tighten it using the hex wrench. The muffler bolt is made of high-quality steel and it sold as an individual part. The muffler cover requires two bolts to secure the cover. This bolt is compatible with chainsaws, hedge trimmers, and other small engines manufactured by Poulan, Weed Eater, and Husqvarna.

This genuine OEM muffler gasket is sourced directly from the manufacturer for use in weed eaters and chainsaws to diminish the noise level. The muffler gasket seals the space where the engine and muffler connect to prevent air and noise from getting in or out. If the gasket is damaged or missing, hot air from the engine would escape and melt the housing cover. The noise level can be affected as well. During routine maintenance, the muffler housing should be removed to examine and replace the gasket. The cost is negligible so this gasket should be routinely replaced; don't wait for damage to the housing. A wrench or socket set and a screwdriver are needed for the replacement. The engine and muffler must be cool to touch before repairing. Remove the screws holding the housing cover and set the lid aside. Use the ratchet to remove the screws from the muffler. Remove and replace the gasket on the backside of the muffler. Reassemble the muffler unit using the ratchet to secure the screws. Reinstall the housing cover. The muffler gasket is sold as an individual unit. It is designed for use in weedeaters and chainsaws manufactured by Craftsman, Husqvarna, Poulan, and Poulan Pro.

This ball bearing and seal are used in a range of chainsaw models. It acts as part of the blade assembly and is designed to both lessen friction and stabilize moving parts. This bearing is also set within a race and the entire race/bearing/seal assembly must be replaced at the same time. The bearing is encased with a rubber seal, which prevents fuel leakage and keeps the engine working smoothly. It does not impede the bearing as it turns. Ball bearings are placed in high contact areas and wear down due to friction. They need to be regularly replaced for optimal performance. If the engine shows difficulty while running, or is louder than usual, the seal or bearing may have worn down. This OEM replacement part is sourced from the manufacturer and works with certain models of Poulan small engines, including the Poulan/Poulan Pro 2900, and Husqvarna chainsaws. This part replaces parts 530019259 and 530047827, both of which are obsolete.