Parts for Lg LCG3611ST/01: Other Parts

This governor controls and regulates the washer's motor speed so the drum spins at the correct RPM for wash and spin cycles. Replacing a failing governor restores consistent spin behavior and helps prevent uneven agitation. What it does

• Regulates motor/drive speed so wash and spin cycles run at intended speeds
• Helps maintain consistent agitation and balanced spinning
• Can cause slow spins, no spin, or erratic drum speed when worn or faulty
• Works with the washer's motor and transmission to match cycle demands

• One governor assembly

• Disconnect power and water supply before starting any repair
• Access typically requires opening the cabinet or control panel; keep track of fasteners
• Inspect related parts (drive belt, motor coupling, wiring) for wear while replacing

This accessory assembly replaces a worn or missing component to restore proper fit and secure connections on your appliance. It helps stop loose parts and ensures the related area functions as intended. What it does:

• Replaces the original accessory assembly that secures or supports nearby components
• Stops movement, rubbing, or rattling caused by a damaged or missing assembly
• Restores correct alignment for the affected area to reduce noise and wear
• Works with the appliance's existing fasteners and mounting points

• Disconnect power (and water if applicable) before starting work
• Follow the OEM instructions for removal and installation
• Use basic hand tools; avoid over-tightening fasteners to prevent damage

This replacement screw is a factory-style fastener used to secure components in place and restore proper fit and function. It's a direct-fit hardware piece sized and finished to match the original installation. What it does:

• Secures panels, brackets, or assemblies to prevent rattling or misalignment
• Restores original mounting strength where a stripped or missing screw causes loose parts
• Helps maintain proper panel gaps and component positioning for reliable operation
• Appropriate where the appliance requires the OEM-style screw head and thread form

• Screw

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or damage plastic parts
• Replace any damaged or corroded mating hardware for best results
• Disconnect power to the appliance and follow manufacturer safety instructions before servicing

This rigid replacement pipe routes fluid between components to restore proper flow and prevent leaks. It's a direct-fit service part when a damaged or corroded pipe is causing poor performance or visible leakage. What it does:

• Channels liquid between system components to maintain correct fluid routing
• Restores secure connection where damaged, cracked, or corroded piping causes leaks
• Helps stop drips and pooling that can lead to component damage or error conditions
• Re-establishes proper flow when an internal or external pipe is obstructed or compromised

• One replacement rigid pipe

• Turn off and unplug the appliance and shut off the water supply before starting
• Inspect mating fittings and replace damaged gaskets or clamps to ensure a leak-free seal
• Use appropriate tools and avoid over-tightening fittings to prevent cracking the pipe
• After installation, restore power/water and check carefully for leaks during a complete test cycle

The Nozzle is an OEM part for LG ranges. It is a small component located inside the burner box that emits gas to create flame. During operation, the nozzle precisely meters fuel flow to each burner to achieve balanced and consistent heating. 

Symptoms of a faulty nozzle include: 

• Burners that light unevenly or emit an irregular flame pattern
• Inability to adjust burner flames or in some cases, lack of ignition
• Possible safety hazard from gas emissions not mixing or igniting properly

Causes can stem from mineral buildup clogging the narrow opening over time. Damage, such as nicks or corrosion, may also disrupt critical gas flow.

This OEM LG part is also compatible with some Kenmore ranges featuring LG gas cooktop systems. Replacing a worn nozzle restores optimal and safe burner performance.

The Nozzle is an OEM part for LG gas ranges. It is a critical component that functions to release gas fuel from the supply line in a regulated and controlled manner to achieve the desired burner flame. The Nozzle has precision-engineered orifices and materials resistant to corrosion to provide reliable and safe operation over extended use.

Symptoms of a bad nozzle include:

• Burner flames that appear uneven, yellow, or unstable 
• Inability to achieve or maintain desired flame height
• Unpleasant gas smells were detected around the range
• Potential safety hazards if damage severely restricts or leaks fuel

Replacing a faulty nozzle restores the exact fuel-air mixture for clean controlled cooking. This affordable OEM LG part ensures optimal and safe burner performance customers expect from their gas range.

This OEM LG part is also compatible with ranges from Crosley, Jenn-Air, and select Kenmore gas models.

The Nozzle is an OEM part for LG gas ranges. It is a critical component that functions to release gas fuel from the supply line in a regulated and controlled manner to achieve the desired burner flame. The Nozzle has precision-engineered orifices and materials resistant to corrosion to provide reliable and safe operation over extended use.

Symptoms of a bad nozzle include:

• Burner flames that appear uneven, yellow, or unstable 
• Inability to achieve or maintain desired flame height
• Unpleasant gas smells were detected around the range
• Potential safety hazards if damage severely restricts or leaks fuel

Replacing a faulty nozzle restores the exact fuel-air mixture for clean controlled cooking. This affordable OEM LG part ensures optimal and safe burner performance customers expect from their gas range.

This OEM LG part is also compatible with ranges from Crosley, Jenn-Air, and select Kenmore gas models.

Restore precise heat control on your range or cooktop. This knob assembly replaces a worn or broken control knob so you can smoothly turn the burner or element on, off, and adjust heat to the setting you need. What it does:

• Attaches to the burner valve or element switch to control on/off and heat level
• Restores proper engagement and alignment when the original knob is cracked or stripped
• Helps ensure accurate position indication for consistent settings
• Common symptoms: knob loose, cracked, missing, or spins without engaging; burner/element doesn't respond or is hard to adjust

• 1 knob assembly

• Disconnect power and, for gas units, shut off the gas supply before servicing
• Pull the old knob straight off the control stem; avoid prying against the panel
• Align the new knob with the stem and press firmly until fully seated
• Verify smooth operation and correct pointer alignment through all settings

This burner is the cooktop surface flame assembly that produces heat for cooking. It replaces a damaged or worn surface burner to restore proper flame and even heating on the cooktop. What it does

• Provides the primary flame source for a gas cooktop burner
• Restores consistent flame distribution when the original burner is warped, cracked, or clogged
• Can resolve symptoms such as weak or uneven flame, burner that won't sustain a flame, or visible damage to the burner head
• Works with the igniter/safety valve assembly to light and maintain the burner

• One surface burner

• Turn off gas supply and power to the appliance before servicing
• Use basic hand tools; handle the burner carefully to avoid bending or damaging the ports
• Clean burner ports of debris before installation to ensure proper flame pattern

This gas surface burner head restores even flame and reliable lighting on your range cooktop. Replacing a worn or clogged burner helps bring back proper ignition, flame pattern, and consistent heat output. What it does:

• Directs gas from the orifice through precisely formed ports to create an even ring of flame
• Works with the spark igniter for quick, consistent ignition
• Helps maintain correct flame size and color for efficient cooking
• Typical symptoms include: burner won't light, delayed ignition, weak/uneven flame, or yellow-tipped flames

• Includes 1 burner head

• Disconnect power and shut off the gas supply before servicing
• Remove grate and burner cap; lift off the old burner head and clean the mating surface
• Align the new burner head over the orifice and ensure proper clearance to the igniter
• Reassemble, restore gas/power, and test burner operation and flame pattern

Restore reliable flame performance with this replacement burner. It mixes and distributes gas to produce the cooking flame on your appliance, helping it light consistently and deliver even, controllable heat during everyday use. What it does:

• Directs gas through burner ports to form a controlled cooking flame
• Replaces burners that are cracked, warped, corroded, or clogged
• Can help resolve weak/uneven or yellow flames and delayed ignition
• Restores stable simmer and more even heat distribution

• Includes 1 burner

• Disconnect power and shut off the gas supply; allow the appliance to cool completely
• Access the burner per your model's procedure; remove any grates/caps and retaining hardware if applicable
• Position the new burner over the orifice and igniter; ensure it sits flat and properly aligned
• Reassemble and restore gas/power; test for proper ignition and flame pattern

This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:

• Fastens plastic and sheet-metal components where a self-tapping thread is needed
• Truss head spreads load to prevent damage to soft or thin materials
• Helps secure control panels, brackets, or trim pieces that require a low-profile head
• Common replacement when original mounting screws are missing, stripped, or corroded

• One truss-head tapping screw

• Use the correct screwdriver bit and moderate torque to avoid stripping the screw or workpiece
• Start threading straight and let the screw form threads without forcing at an angle
• Disconnect power and follow appliance-specific service safety procedures before working internally
• Replace any damaged mating threads or clips for a secure fit

This burner tube directs gas from the valve to the oven's burner assembly for proper flame distribution and heat during baking and broiling. Replacing a damaged tube restores safe, even combustion and consistent cooking performance. What it does

• Channels gas to the oven burner so the flame lights and stays steady
• Helps maintain even heat for reliable cooking and browning
• Prevents gas leaks caused by cracks, holes or severe corrosion
• Can resolve symptoms like weak or uneven flames, flame blowouts, or visible tube damage

• Turn off gas supply and electrical power before beginning any service.
• Inspect mounting hardware, gaskets and alignment; replace any worn seals to ensure a proper fit.
• Do not force, bend, or dent the tube during installation; handle carefully to avoid leaks.

This nozzle is the burner orifice that meters gas flow to a single burner, helping your range or cooktop produce a correct, stable flame for consistent heating and cooking performance.

• Controls gas flow to its designated burner for proper flame size and shape
• A clogged, worn, or incorrect nozzle can cause weak or oversized flames, yellow tipping, uneven heating, or noisy flames
• Commonly replaced during LP/Natural gas conversions; each burner requires the exact nozzle specified by the service manual
• Useful to check if burner cleaning doesn't restore normal flame behavior

• Disconnect electrical power and shut off the gas supply before servicing
• Match the nozzle to the exact burner position and gas type; verify markings against the original
• Access under the burner/cooktop; use the correct wrench size and avoid overtightening
• After installation, leak-test all fittings with a soap solution and confirm proper flame characteristics per the manual

This glass turntable plate replaces a cracked or missing microwave cooking surface to restore stable, even rotation and safe food support. Designed to fit the oven's turntable system and help prevent uneven heating and spills. What it does:

• Provides a flat, heat-resistant surface for cookware and food while the microwave runs
• Sits on the roller ring/drive coupler so food rotates for even cooking and reheating
• Replaces chipped, cracked or missing plates that can cause wobbling, noise or uneven heating
• Helps prevent direct contact between food and the microwave cavity floor

• One glass plate assembly

• Unplug the appliance or disconnect power before servicing
• Handle glass carefully; replace if chipped or cracked to avoid breakage during use
• Set the plate onto the roller ring/drive support so it seats securely before operating
• No special tools typically required;

This Main PCB Assembly is the primary control board that manages a range/oven's functions and user interface, restoring proper control and communication between components when the original board fails. What it does:

• Regulates oven/range functions and timing signals for heating elements and switches
• Powers and communicates with the display, touchpad/buttons, and status indicators
• Helps coordinate safety interlocks and sensor inputs for normal operation
• Commonly replaced for symptoms like unresponsive controls, no display, or intermittent operation

• Disconnect all power at the breaker before accessing the appliance.
• Handle the board carefully to avoid static damage—use ESD precautions where possible.
• Verify power and wiring connections are correct; replace with the exact OEM board only.

The Burner Cap is an OEM part for LG ranges. It covers the burner assembly on the cooktop and directs flame for efficient cooking. Burner caps allow heat to be spread evenly across pans while containing dangerous flames and sparks.

Causes of a bad burner cap generally include cracks, warping, or damage from high heat over time. Accidental mishandling or impact can also weaken burner caps.

Symptoms of a bad burner cap include:

• Inefficient or uneven heating of cookware
• Visible flames escaping outside the burner area
• Cracks or holes in the burner cap surface
• Looseness, wobbling, or inability to properly secure the cap

This OEM LG part is also compatible with some Kenmore models.