Parts for Lg LRE4211ST/00: Other Parts

Truss head tapping screw secures trim, panels, and assemblies on dryers. Replace if screw is stripped, missing, or damaged during appliance repair.

Insulator for electric and gas ranges. Installs between internal components to provide heat or electrical protection. Replace if cracked or missing.

Replacement mounting screw for microwave panels and components. Secures loose or rattling parts when original screws are stripped, missing, or damaged.

Flat washer for microwave fastening hardware. Distributes load and prevents surface damage. Replace if worn, missing, or cracked to maintain secure connections.

Secures the fan blade to the motor shaft in ranges and ovens. Replace if loosened from vibration, stripped threads, or missing to restore proper mounting.

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

Machine screw for electric and gas ranges. Secures internal components and panels. Replace if screw is stripped, missing, or damaged during service work.

Factory mounting screw secures brackets, covers, and internal assemblies in your range. Replaces missing, stripped, or damaged fasteners for proper fit.

Replacement screw for electric and gas ranges. Secures internal components and panels. Needed when original is stripped, missing, or damaged during repair.

Secures panels, brackets, and internal components in your range. Replace this screw if the original is missing, stripped, or rusted for proper fit.

Customized screw secures panels, brackets, and small assemblies in ranges and ovens. Replace when original specialized fastener is missing or damaged.

Hardware washer that distributes fastener load and maintains proper spacing in your range. Replace if missing, worn, or damaged to restore secure mounting.

Secures the fan blade to the motor shaft in ranges and ovens. Replace if loosened from vibration, stripped threads, or missing to restore proper mounting.

Replacement mounting screw for range panels and components. Needed when original screw is stripped, lost, or damaged. Secures panels for stable operation.

Control knob for range. Installs on control panel to adjust temperature and cooking settings. Replace if worn, cracked, broken, or graphics are faded.

Replace worn, cracked, or missing range control knobs. Installs on the control panel to adjust burner heat settings. Restores proper function and appearance.

Fix unresponsive side panel buttons on your range with this control circuit board. Restores button input function and command relay to main controls.

Oven not heating or display blank? This main control board manages cycles, sensors, and inputs. Common fix for unresponsive controls. Moderate difficulty.

Fix a range that won't heat, cycle on, or respond to buttons. This control board assembly interprets inputs and restores reliable oven operation.

Replacement screw for electric and gas ranges. Secures panels, brackets, and internal assemblies. Restores tight fit when original is missing or stripped.

Replacement screw for electric and gas ranges. Secures internal components and panels. Order a new screw if the original is stripped, missing, or damaged.

Fix intermittent power issues or function failures in your electric range. This wiring harness restores electrical connections between components.

Replacement oven rack support bracket for ranges. Mounts inside the oven cavity to hold rack glides in position. Needed when original is bent or broken.

Support bracket for range burner assembly. Secures and stabilizes burner components in proper position. Replace if cracked, bent, or broken to restore stability.

Range grill not browning or heating? This radiation heater element delivers radiant heat for microwave grill and browning features. Restores proper cooking.

Replace a burned-out smoothtop burner that won't heat. This radiant element restores consistent heating to glass cooktop zones. Simple DIY repair.

This Radiant Surface Element is an OEM replacement part for LG electric ranges and cooktops. It is a high-power coil heating unit located below the cooktop surface that provides efficient, customizable heat for various cooking needs.

Causes of failure can be wear and damage to coiled filaments from prolonged heating cycles, cracking of ceramic insulators, or loose wiring connections suffering arcing or resistance over time.

Symptoms of a faulty element include:

• Slow or inadequate heating of cookware even on high settings
• Temperature fluctuations within the heating zone
• Burning or charring of spills and foods on the element itself
• Tripped circuit breakers obstructing range operation

This replacement is also compatible with some Kenmore models

Secures the idler to maintain proper belt tension and alignment in your range drive system. Replace if bent, worn, or causing noise issues. Verify fit with your model number before ordering.

Inner door cover panel for electric and gas ranges. Replaces damaged, cracked, or missing inner door cosmetic panels. Installs on the interior door assembly.

Bracket that anchors the handle to your range oven door. Replace if cracked, stripped, or broken to restore secure handle attachment and alignment.

Protects your range control panel display from spills, grease, and damage. Replace when cracked, discolored, or visibility is reduced. Verify fit with your model.

Replace a cracked or unresponsive range control panel to restore display and button functions. Direct-fit part secures the keypad interface area.

Range not heating or displaying error codes? This power control board assembly regulates oven temperature and burner functions. Moderate skill repair.

Fix intermittent power loss or electrical failures in your range with this wiring harness. Restores proper connections between components. Moderate DIY.

Range controls not responding or features intermittent? This wiring harness restores power and signal connections between components for reliable operation.

Replace your range's control board support bracket if the PCB is loose or unstable. This mounting bracket secures the circuit board. DIY-friendly repair.

This neon indicator lamp lights up when its circuit is energized, providing at-a-glance status confirmation. Replace when dim or burned out. Verify fit.

If your range selector knob won't respond or settings won't change, this rotary control switch restores reliable knob control. Moderate DIY repair.

Burner stuck on high or won't adjust temperature? This rotary switch behind the control knob regulates heat settings. DIY-friendly, 20-minute fix.

If your appliance won't change settings or cycle properly, the rotary switch may be faulty. This switch controls function selection and mode changes.

Circular lug that connects stripped wires to threaded terminals in microwaves. Replace if cracked, corroded, or missing to restore secure connections.

Control panel plate assembly for ranges. Replaces cracked, broken, or damaged front panel plates. Essential for restoring appearance and protection.

Idle packing bushing for electric and gas ranges. Replaces worn, cracked, or missing bushings. Ensures proper fit and cushioning for range components.

Fix loose or rattling heating elements with this range heater bracket. Secures the heater assembly in proper alignment to prevent movement and damage.

Oven rack for electric and gas ranges. Provides stable surface for cookware during cooking. Replace if bent, warped, cracked, or missing.

Fix unresponsive control panel buttons with this tactile switch replacement. Restores reliable button response. Simple DIY repair, typically under 5 minutes.

Replace your range's wire harness if the existing wiring is damaged, frayed, or showing signs of wear. Connects electrical components inside your range.

If your oven won't reach the right temperature or shows an F9 error, the temperature sensor may be faulty. Simple DIY repair in under 45 minutes.

Replace a damaged or corroded wire harness in your range. This single-connection harness restores proper electrical connections when original wiring is frayed, melted, or broken.

Fix uneven cooking or baking in your range. This convection fan motor circulates hot air for consistent heat distribution. Moderate DIY repair.

Fix loose or misaligned range components with this retaining ring. Secures parts in place to prevent excess movement and wear. Simple installation.

Fixes uneven baking and longer cooking times in your range. This convection fan blade restores proper air circulation for consistent oven temperatures.

Microwave not cooling properly or making unusual noise? This fan blade circulates air for heat dissipation and even cooking. DIY-friendly repair.

Replace a cracked, bent, or missing oven rack support in your range. Installs inside the oven cavity to hold and guide the rack. Essential part.

Replace your range's control panel if the original is cracked, damaged, or has faded graphics. This panel mounts to the front of your appliance housing.

Replace your range oven light bulb when it burns out or dims. Restores interior visibility for safe cooking. Verify compatibility with your model number.

Replace your burned-out or dim oven light bulb to restore interior visibility while cooking. Direct-fit incandescent lamp for safe food monitoring. Verify fit with your model number.

This hinge bracket secures the oven door hinge mechanism on your range. Replace if the bracket is cracked, broken, bent, or missing to restore door support.

Oven won't brown or crisp food on top? Replace the broil element. This upper heating component restores efficient broiling in electric ranges.

Replace your range oven door gasket to restore proper heat sealing and improve cooking efficiency. Fits select electric and gas range models.

Oven not heating or baking unevenly? This electric range heating element restores proper cooking temperature. Moderate DIY repair in 30-45 minutes.

Replacement support bracket for range control panels. Installs behind the control panel to provide structural support. Needed when original is broken or missing.

Range oven door gasket seals the oven cavity to retain heat and improve efficiency. Replace if torn, cracked, or no longer sealing properly. Confirm fit.

Base plate for electric and gas ranges. Provides structural support at the bottom of the appliance. Replace if cracked, broken, or missing. Easy install.

Secures and finishes your range door opening with proper structural support. Replace if cracked, warped, or damaged to restore door alignment and seal.

Outer front plate panel for ranges. Restores exterior appearance and provides finished surface for controls. Replaces damaged, dented, or scratched panels.

Replacement front panel for your range. This cosmetic component covers the control area and gives your appliance a finished look. Replace if cracked, dented, or discolored.

Rubber foot pad that supports and stabilizes your range on the floor. Replace if cracked, broken, worn, or missing to keep your appliance level.

Secures your range to the floor or wall to prevent tipping hazards. Replace if damaged or during installation. Verify compatibility with your model.

Replacement slider for range drawers and panels. Restores smooth movement when original is worn, cracked, or broken. Mounts to moving components for alignment.

Replace worn range drawer sliders to restore smooth, quiet operation and proper alignment. Prevents damage to surrounding trim. Confirm fit with your model.

Accessory assembly for electric and gas ranges and wall ovens. Replaces damaged, broken, or missing accessory components. Restores proper fit and function.