Kenmore Range 790.94219409 (79094219409, 790 94219409) Parts

• Won't start
• Element will not heat

After an internet search, the likely problem was a faulty "Element Switch.." I actually unplugged the stove and removed the switch (I did NOT disconnect the wires). I obtained the part number on the switch, disassembled it, observed that the contacts were highly degraded, reassembled the switch and reinstalled it back into the stove. This all provided confidence the SWITCH was faulty. One switch on the AppliancePartsPros.com website (AP2591804) looked exactly like the switch in the stove... Read more

• Element will not heat
• Won't start

The receptacle that held the burner element in place was broken so the burner would not make a connection and heat up. I ordered the receptacle kit. There was even an online video that showed how to make the repair. It just took a screwdriver and wire cutters and about 15 minutes and the job was done. The burner works great. Read more

• Element will not heat

I went to a local stove parts store to find a replacement. The store ordered the element for me and promised that it would arrive the next day. I waited for seven 'working' days,but the part never came. So I went online, and found the part in AppliancePartsPros.com. I ordered it in the evening of November 5, 2014, and the part was delivered the next day, November 6 at 11.08AM! Fantastic! I don't know how they could deliver that fast. But clearly, nobody could beat that service. The part fits... Read more

• Element will not heat

Replaced all four element switches. Switches arrived within two days of ordering. That's about normal for AppliancePartsPros. They were the correct ones; not generic, and fit the original control knobs perfectly. This kind of service is what I'm used to from ApplicanePartsPros. Read more

Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old... Read more

I ordered this glass and used a youtube video to replace the shattered glass step-by-step. I was a bit wary of doing this work myself, but it proved to be a snap. Within an hour of finding this package on my front porch, I had the oven as good as new. Read more

Ordered on Wed, received on Fri. Took less than 5 minutes to replace all 4. No tools needed. Read more

• Door won't close

I purchased two screws (316433300) and the handle (316443602). Screws and handle are exact replacements of old parts that wore out. I was hoping the screw would be longer, but so far it works perfectly. I will keep you posted if it wears out again in the near future. Thanks ApplicancePartsPros.com — this was an easy fix! Read more

• Little to no heat when broiling

Removed old element , found the part on exploded view diagram of th oven. Got on appliance parts pro web site put in model number , made sure picture on line looked the same and ordered. While I was at it ordered a bottom pan for the oven that needed replacing. Received both parts 3 or 4 days later regular shipping. Installed both parts no problem . Thanks appliance parts pros. Read more

• Oven is too hot
• Little to no heat when baking
• Won't start
• Oven not heating evenly

I replaced the probe which is a thermocouple. Naturally the connector was different from the one on the stove so I cut off the connector on the old probe and soldered it to the new probe. The cleaning of the wires and soldering them was the most time consuming activity of the repair. My wife just tried the stove and the oven temperature read exactly as the setting. Read more

Replaced bottom panel Read more

• Element will not heat

When I called customer service your representative at Appliance Parts Pros was able to help me diagnose the problem and order the two parts that I needed. both parts arrived the next day and with helpful tutorial videos I was able to replace both the Surface Unit Switch and the Universal Element in less than 45 minutes. Thanks so much for the great service and the money you saved me. Read more

I ordered 2 large ones and 2 small ones which arrived earlier than I was expecting. Read more

The repair was a success. The switch and came looked different from the original. I called Appliance Parts Pro, they lady on the phone said that Frigidaire changed the switch and how to wire it up correctly. Problem solved. It all works as it should. Read more

Watched the video here, took the leap that burner was the problem and ordered it. Also found another vid on you tube that was more specific to my Kenmore. Tip: find out how to take off the oven door. For mine it was very easy but not detailed in the APP vid. I followed instructions in APP vid but also first took off back panel of range and tested resistance of old burner to ensure that was truly the problem (as suggested by other YT vid). Also, dis/connecting the wires from the back is easier... Read more

Bought name brand parts to match the stove brand. The fit was perfect and have never had an order arrive the next day from ordering it. Read more