Kenmore Washer 110.42722201 (11042722201, 110 42722201) Parts

This replacement flexible hose restores proper water transfer in compatible appliances, providing a secure connection to help prevent leaks and ensure reliable operation. Fits factory connection points and replaces worn or damaged tubing. What it does

• Channels water between appliance components to maintain proper flow
• Replaces cracked, brittle, or deteriorated hose sections that can cause leaks
• Helps stop intermittent water delivery or puddling under the appliance
• Restores a tight seal at hose fittings to reduce drips and water damage

• Turn off power and shut off the water supply before starting any repair
• Inspect fittings and clamps; replace damaged clamps or seals as needed
• Use proper clamps and hand-tighten fittings, then test for leaks before finalizing

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

Size: 10-24 x 3/8 inch.

This drain hose coupling connects two sections of the washer drain hose to restore a watertight path for wastewater, helping prevent leaks and restore proper draining. What it does:

• Joins two drain hose sections or connects hose to a mating outlet for secure water flow
• Seals the hose connection to reduce leaks at the joint
• Restores proper draining when a damaged or missing coupling causes slow drain or leakage
• Designed to fit the OEM hose profile for a snug, stable connection

• One drain hose coupling as shown

• Turn off power and water supply before starting any repair
• Inspect hose ends for damage; trim to clean cut if required for proper fit
• Push hose ends fully onto the coupling and secure with manufacturer-recommended clamps

This syphon breaker prevents dirty drain water from being siphoned back into the dishwasher, helping maintain proper draining and protect wash water from contamination. It's a direct-replacement drain air-break for compatible dishwashers. What it does:

• Stops backflow/siphoning from the household drain into the dishwasher
• Helps maintain proper drain performance and prevents wastewater re-entry
• Can reduce odors and cloudy or soiled dishes caused by contaminated wash water
• Works as part of the dishwasher's drain plumbing to preserve wash hygiene

• Disconnect power to the appliance and turn off water supply before servicing
• Replace only with identical part and ensure correct hose routing and secure clamps
• Inspect adjacent drain hoses and connections; replace damaged hoses or clamps as needed

This 22-inch strap snubber cushions and guides the dryer belt at the front of the drum to help reduce noise and prevent premature belt wear. It restores proper belt routing for smoother, quieter tumbling in compatible Whirlpool dryers. What it does:

• Cushions the belt where it contacts the front drum area to reduce rubbing and chafing.
• Helps maintain correct belt routing and tension to prevent slipping and uneven drum rotation.
• Can reduce squeaks, squeals, and jerky drum movement caused by a worn or broken snubber.
• Protects the belt from premature wear that may lead to fraying or failure.

• Disconnect power (and gas supply for gas dryers) before beginning any repair.
• Access typically requires removing the dryer front panel or drum—follow the OEM service manual for safe disassembly.
• Inspect the drive belt, idler pulley, and drum rollers when replacing the snubber; replace any worn parts.
• Wear gloves and eye protection.

This hose coupling connects a flexible appliance hose to the appliance plumbing, restoring a secure water connection and preventing leaks. Ideal when a worn or damaged coupling causes drips or loose hose fit. What it does:

• Provides a secure connection point between an appliance hose and the appliance inlet
• Replaces cracked, broken or corroded couplings that can leak or allow the hose to detach
• Restores proper hose sealing to reduce water drips at the connection
• Compatible with the original inlet connection type and mounting orientation

• Turn off and disconnect appliance power and shut off the water supply before replacing
• Remove the old coupling and clean the mating surfaces; inspect hose and clamps for wear
• Use proper clamps and hand-tighten; avoid over-tightening which can damage fittings

This drain hose coupling kit connects the washer drain hose to the appliance drain outlet, restoring a secure, leak-resistant hose connection and preventing water leaks during drain cycles. What it does:

• Provides a replacement coupling to join the drain hose to the washer drain outlet
• Re-establishes a tight hose connection to reduce leaks and water damage
• Addresses symptoms such as leaking at the drain connection or a loose hose fit
• Compatible with affected Whirlpool top-load washer drain assemblies

• Unplug the appliance before servicing and work on a dry surface
• Remove the old coupling and inspect the hose and outlet for damage before installing
• Ensure the hose is fully seated and secure with the existing or supplied clamp(s)

This is a genuine replacement mounting screw that secures appliance components and panels so parts stay aligned and stable. Installing the correct screw restores proper fit and helps eliminate vibration or loose panels. What it does:

• Fastens panels, brackets, or small components in place
• Replaces missing, stripped, or damaged screws that cause loose parts
• Helps stop rattling, vibration, or misaligned panels
• Restores secure connections after repairs or part replacement

• One mounting screw

• Unplug the appliance or disconnect power before starting work
• Use the correct screwdriver bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Keep removed hardware organized so you can reuse existing screws when applicable

A small axle-style pin that secures a wheel or roller to its bracket so the appliance component turns smoothly. Replacing a worn or damaged pin restores proper wheel alignment and prevents slipping or wobble. What it does:

• Secures a wheel or roller to its mounting bracket so the wheel spins correctly
• Keeps the wheel aligned to prevent binding, wobbling, or irregular movement
• Helps stop grinding or scraping noises caused by a loose or broken pin
• Supports safe, consistent operation of the wheel assembly

• Disconnect power and water before starting any repair.
• Remove panels or assemblies as required to access the wheel; keep fasteners organized.
• Inspect the mating wheel and bracket; replace any damaged components to ensure proper fit.
• Use basic hand tools.

This lid switch detects when the washer lid is closed and signals the control to allow motor operation. Replacing a faulty switch restores normal cycle starts and the washer's safety interlock. What it does:

• Detects lid position and completes the electrical circuit so the washer can start and run.
• Acts as the safety interlock that prevents the motor from running with the lid open.
• A failing switch can prevent the washer from starting, stop spin or agitation, or cause cycles to stop unexpectedly.
• Replaces the lid-actuated switch used in top-load washers' control/interlock system.

• Disconnect power at the breaker or unplug the appliance before beginning work.
• May require removing the washer top or control panel to access the switch—keep track of fasteners and connectors.
• Handle electrical connectors gently and verify connections are secure; test the new switch only after restoring power per manufacturer guidance.

This tub seal keeps the washer tub sealed at the transmission, preventing water from leaking into the cabinet and onto the floor. Replacing a worn seal restores proper sealing at the tub/transmission junction. What it does:

• Seals the gap between the washer tub and transmission to stop water leaks beneath the washer.
• Helps prevent transmission contamination from water and debris that can cause premature wear.
• Common symptom: water pooling under the machine or on the floor during or after a wash cycle.
• Common symptom: visible oil or wetness under the cabinet near the transmission area.

• Disconnect power and turn off water supply before starting any repair.
• Drain the washer and remove necessary components (basket, agitator, or access panels) to reach the tub/transmission junction.
• Inspect surrounding components (gaskets, bearings, hub) for damage and replace as needed to ensure a lasting repair.

This miscellaneous parts kit provides a selection of small hardware and replacement pieces used in appliance repairs, so you have the fasteners and clips commonly needed to secure panels and components during service. What it does:

• Supplies assorted fasteners, clips, and small hardware used across multiple repair steps
• Replaces missing or damaged mounting hardware that can cause loose panels or rattling
• Helps complete repairs without waiting for individual screw or clip orders
• Useful for routine maintenance and reassembly after component replacement

• One miscellaneous parts kit (assorted small hardware)

• Use only the pieces that match the original hardware and fit securely; do not force fasteners
• Power off and disconnect the appliance before beginning any repair
• Keep small parts away from children and pets; handle sharp edges carefully
• If a specific OEM fastener or clip is required, verify fit with the appliance's parts diagram