Kenmore Dryer 110.62922100 (11062922100, 110 62922100) Parts

Genuine Whirlpool part

Exhaust Pipe (Dryer Vent), 1

By: Whirlpool

Part Number: WPW10331278

This exhaust pipe directs heated air from the dryer drum to the household vent, restoring proper airflow for efficient drying and reduced lint buildup. It's a direct-fit replacement designed to match the OEM airflow path. What it does:

Channels dryer exhaust from the appliance to the external vent to maintain proper airflow.
Helps prevent lint accumulation in the cabinet by providing a sealed exhaust path.
Can reduce long dry times and overheating caused by restricted or damaged venting.
Addresses symptoms such as poor drying performance, hot dryer cabinet, or noticeable burning/overheating smells near the dryer vent area.

What's included:

One exhaust pipe.

Install notes:

Disconnect power (and gas, if applicable) before starting work; the appliance is fully de-energized.
Wear gloves to avoid sharp edges; remove old pipe and clean vent connections before installing the replacement.
Secure with appropriate clamps or fasteners and ensure a continuous, unobstructed path to the exterior vent.
After installation, run a short cycle to check for leaks.

$28.33

Compare At:: $30.16
You Save:: $1.83

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Wire Harness

By: Whirlpool

Part Number: 8299931

$173.46

Compare At:: $186.02
You Save:: $12.56

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Hinge

5.0 (8)

By: Whirlpool

Part Number: WP387402

Used for control panel.

Do-It-Yourself Stories from Customers like You Kenmore washer would not spin and made a grinding noise Gregory B. • Wappingers Falls , NY • January 17, 2015

Replaced direct drive washer motor coupling. Instructional video was right on and easy to follow. Was able to save a 15 year old machine for a few bucks. The shipping was super fast (within 2 days) and the customer service is fabulous. I would definitely recommend to everyone. Read more

Genuine Whirlpool part

Panel

By: Whirlpool

Part Number: 279659

Genuine Whirlpool part

Broken Belt Switch Wire

By: Whirlpool

Part Number: 3394081

Genuine Whirlpool part

Enamel Paint

By: Whirlpool

Part Number: 4392900

Color: Biscuit. Size: 1 qt. can uncut. Enamel paint.

Genuine Whirlpool part

Hex Nut

By: Whirlpool

Part Number: WP3387709

Genuine Whirlpool part

Knob

5.0 (1)

By: Whirlpool

Part Number: WP3402570

Do-It-Yourself Stories from Customers like You Knob was breaking apart Rebecca M. • Naples, , FL • January 31, 2015

Watched supplied video; pulled off the remnant and popped replacement part back on. EZ PZ. only problem, took one week to receive part. surprised cause last thing I ordered took only 2 days. Read more

Genuine Whirlpool part

Knob, Control

5.0 (1)

By: Whirlpool

Part Number: WP3402572

Do-It-Yourself Stories from Customers like You Plastic knobs disintegrated on dryer due to sun exposure John C. G. • Placerville , CA • April 10, 2018

Called AppliancePartsPros who told me what I needed and even placed the order for me. Voila, that simple. Read more

Genuine Whirlpool part

Knob

5.0 (6)

By: Whirlpool

Part Number: WP3402594

Do-It-Yourself Stories from Customers like You Plastic knobs disintegrated on dryer due to sun exposure John C. G. • Placerville , CA • April 10, 2018

Called AppliancePartsPros who told me what I needed and even placed the order for me. Voila, that simple. Read more

Genuine Whirlpool part

Knob

5.0 (1)

By: Whirlpool

Part Number: WP3402597

Do-It-Yourself Stories from Customers like You Replaced the knob on dryer. Karen O. • Sun City Center , FL • April 29, 2021

I took the old one off and replaced it with a new one. Read more

Genuine Whirlpool part

Handle

5.0 (1)

By: Whirlpool

Part Number: WP3977746

Do-It-Yourself Stories from Customers like You The lever to turn on dryer was broken the handle was broken and the latch was broken David R. • Jemison , AL • February 09, 2015

I opened the top of the dryer (after watching the video on your website) and replaced the lever on the switch. Removed two screws near the lint filter, used a putty knife to release fasteners under the top and raised the top. Held it in place with a short piece of board then removed the two screws holding in the switch and lever. Replaced the broken lever with the new one and put it all back together. The handle was a little more difficult as it took a lot more prying with a screwdriver to... Read more