Kenmore Refrigerator 253.44354400 (25344354400, 253 44354400) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304506475
This replacement light bulb restores clear illumination inside your appliance, making it easy to check progress and find items. It matches the original fit and connection for dependable lighting exactly where the manufacturer intended.
- Provides appliance illumination per the original design
- Replaces bulbs that are burned out, dim, flickering, or intermittent
- Helps you monitor progress and see the compartment clearly
- Fits the original socket for straightforward replacement
What's included: 1 light bulb Install notes:
- Disconnect power to the appliance before replacing the bulb
- Allow the bulb and surrounding area to cool completely
- Handle the bulb by the base; avoid touching the glass
- Replace with the same type and wattage specified on the appliance or in the manual
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241689301
Do-It-Yourself Stories from Customers like You
Ice maker door not sealing causing frost buildup and leaking Richard B. • Shoreline , WA • October 11, 2016
I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time.
Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 218709101
Genuine Frigidaire part
By: Frigidaire
Part Number: 241511101
This genuine OEM part is the main control board for refrigerators. The main control board is the primary circuit board that controls the refrigerator's essential functions of maintaining and controlling temperature. If the refrigerator is no longer staying cool, powering on, or maintaining proper temperature, the main control board will need to be replaced. Luckily, this is a fairly simple repair.To begin, start by unplugging the refrigerator. Once unplugged, proceed to uninstall the inner door panel of the refrigerator by removing the mounting screws. Once removed, access the old control board. Remove the wire harness and any individual wires attached to the old board. After that, pull the old board out of its mounting brackets to fully remove it from the refrigerator. Reinsert the wires into their correct terminals on the new board and snap it into its mounting brackets. Once secured, reinstall the inner panel of the refrigerator and restore power to the appliance. This authentic replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse brand refrigerators.
Do-It-Yourself Stories from Customers like You
Lights worked but the refrigirator would not operate Robert D. • Sturgis , KY • September 27, 2015
I call AppliancePartsPro and told them the problem. They told me that it most likely was the power board. I ordered the part, received it in about three day. Watched a video on how to install. I installed it and it is working like new.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 240328401
Do-It-Yourself Stories from Customers like You
Broken lower hinge David J. • Macclenny , FL • April 05, 2016
Took off the off the door, pulled out the broken piece and replaced it wit the new one.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 240394102
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304455699
Genuine Frigidaire part
By: Frigidaire
Part Number: 240376002
Do-It-Yourself Stories from Customers like You
My refrigerater had a broken filter shield and a plugged up filter Michael M. • Heber City , UT • April 17, 2016
I changed the shield and the filter. your company for people changing and repairing you have a online to show how to change. your co is extremely fast on shipping and on customer service. im extremely fortunate by finding you a few years ago. everytime i need my appliances repaired i buy parts from your company. thank you so much and i recommend you to everyone to repair their own appiance and your website guides you step by step. thank you again michael
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 240521304
Genuine Frigidaire part
By: Frigidaire
Part Number: 240570205
Do-It-Yourself Stories from Customers like You
The module cover label was worn through for the "light off" button James F. • Morehead , KY • June 16, 2014
I ordered the replacement Cover and it arrived within 10 days. I was told that it was easy to remove the old cover and reapply the new one. I didn't believe that would be possible. However, today I removed the old one (had to use a hair dryer because the old one was brittle) and it came right off (also used a putty knife to get under the edge). Putting the new one on was not the problem that I had imagined. Was careful and lined up the top to the top of the Module, and then pressed it on. ...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241511111
This genuine OEM part is the main control board for refrigerators. The main control board is the primary circuit board that controls the refrigerator's essential functions of maintaining and controlling temperature. If the refrigerator is no longer staying cool, powering on, or maintaining proper temperature, the main control board will need to be replaced. To begin, start by unplugging the refrigerator. Once unplugged, proceed to uninstall the inner door panel of the refrigerator by removing the mounting screws. Once removed, access the old control board. Remove the wire harness and any individual wires attached to the old board. After that, pull the old board out of its mounting brackets to fully remove it from the refrigerator. Reinsert the wires into their correct terminals on the new board and snap it into its mounting brackets. Once secured, reinstall the inner panel of the refrigerator and restore power to the appliance. This authentic replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse brand refrigerators.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241519901
This wiring harness routes power and signals between the appliance control and its components, restoring reliable electrical connections for proper operation. Use this direct-fit replacement when the original harness is damaged or intermittent. What it does
- Provides dedicated wiring between the main control and motors, valves, switches or sensors
- Replaces brittle, frayed or burned wires that can cause intermittent operation or failed components
- Restores missing circuits that prevent the appliance from starting or running specific functions
- Helps stop electrical arcing and loss of connectivity when the original harness insulation is compromised
What's included
Install notes
- Disconnect power (unplug or switch off breaker) before beginning any repair
- Compare new harness to the old unit to verify routing and connector fit before installation
- Route and secure the harness away from moving parts and heat sources; use existing clips and ties
- If connectors are corroded or pins are damaged, replace connectors
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241522901
Genuine Frigidaire part
By: Frigidaire
Part Number: 241578401
Do-It-Yourself Stories from Customers like You
Bad harness Paul C. • Glendale , AZ • July 26, 2015
Replaced it
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241680506
Genuine Frigidaire part
By: Frigidaire
Part Number: 241682102
Do-It-Yourself Stories from Customers like You
Broken actuator and missing door bin Conrad M. • Lake Toxaway , NC • October 15, 2018
For the actuator, I took off the dispenser plate, removed 3 screws holding the actuator. Flipped it over to remove the brackets holding the actuator. Removed old actuator and installed new one, put the bracket back on and then flipped over put the three screws in and put the dispenser plate back on. Took me 30 minutes.
The door bin just snapped in the door.
Read more
More