Kenmore Dishwasher 665.17514202 (66517514202, 665 17514202) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8268391
This pump sump screen filters lint, debris and small objects from wash water before it reaches the drain pump, helping prevent clogs and pump damage. Replace a cracked or clogged screen to restore proper draining. What it does:
- Captures lint, coins, hair and small debris before the drain pump
- Helps prevent pump blockages that cause poor draining or standing water
- Reduces wear on the drain pump by stopping larger debris
- Improves overall drain performance when the existing screen is damaged or clogged
What's included: One pump sump screen Install notes:
- Disconnect power and water before accessing the pump area
- Remove the washer access panel or cabinet per your model's service instructions to reach the sump
- Inspect and clean surrounding areas and the pump inlet when replacing the screen
More
$32.95
- Compare At:
-
$39.54
- You Save:
-
$6.59
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268522
A small replacement retainer that secures the FlexRow assembly so the component stays aligned and stable during use. Replacing a worn or broken retainer restores proper positioning and reduces movement. What it does:
- Holds the FlexRow assembly in place to prevent shifting or sagging
- Helps maintain correct alignment for even operation
- Stops clicking, rubbing, or intermittent contact caused by a loose assembly
- Prevents additional wear on adjacent clips or mounts
What's included: One retainer Install notes:
- Disconnect power to the appliance before beginning any repair
- Removal usually requires releasing adjacent clips or fasteners; basic hand tools may be needed
- Inspect surrounding parts and replace any damaged clips or mounts for a secure fit
More
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268667
This dual positioner assembly helps align and hold the control shaft/knob mechanism so selections register correctly and controls operate smoothly. It replaces a worn or broken positioner to restore reliable selector alignment. What it does:
- Secures and centers the control shaft/knob so detents register properly
- Prevents loose or wandering knobs and helps ensure accurate cycle selection
- Commonly replaced when knobs feel sloppy, skip positions, or controls don't stay set
- Works with the control panel mounting to stabilize selector movement
What's included: One dual positioner assembly Install notes:
- Disconnect power to the appliance before starting any work
- Remove the control panel or console to access the positioner per your model's service instructions
- Handle plastic tabs and mounting points carefully to avoid breakage during removal/installation
- Test control function after reassembly to confirm correct alignment and operation
Do-It-Yourself Stories from Customers like You
The positioned broke Mary S. • Browerville , MN • July 24, 2016
I didn't even. Have to wai for my husband to fix it snapped the old part off and snapped the new one on
Read more
More
$1.60
- Compare At:
-
$1.89
- You Save:
-
$0.29
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 3400865
Color: Biscuit. Screw for lower toe panel. For black screw use WP302868, for white screw use WP3400836.
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 799344
Color: White. Size: 1 qt. can. Acrylic appliance paint.
More
$102.95
- Compare At:
-
$121.48
- You Save:
-
$18.53
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 8171477
$31.95
- Compare At:
-
$37.70
- You Save:
-
$5.75
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10586591
$140.45
- Compare At:
-
$168.54
- You Save:
-
$28.09
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W11763739
$23.63
- Compare At:
-
$26.25
- You Save:
-
$2.62
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 8269736
$34.73
- Compare At:
-
$40.98
- You Save:
-
$6.25
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 8534946
This replacement capacitor shield protects the appliance's capacitor from debris, contact and shorting, helping extend component life and reduce electrical faults. It installs over the capacitor to block dust, wiring contact and accidental damage. What it does:
- Covers and protects the capacitor from physical contact, dust and loose wiring
- Helps prevent short circuits and arcing caused by accidental contact with the capacitor
- Useful when existing shield is cracked, missing or deformed
- Can reduce risk of intermittent electrical faults related to exposed capacitor
What's included:
- One capacitor shield (protective cover)
Install notes:
- Always disconnect power to the appliance before servicing
- Capacitors can hold a charge; discharge safely before touching electrical components
- Remove necessary access panels to reach the capacitor; replace shield without stressing wires
More
$13.48
- Compare At:
-
$16.18
- You Save:
-
$2.70
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10871198
$67.95
- Compare At:
-
$80.86
- You Save:
-
$12.91
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 4396197
$100.51
- Compare At:
-
$118.60
- You Save:
-
$18.09
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP661658
The Dishwasher Drain Pump is an OEM part for Whirlpool dishwashers. It is responsible for removing water from the dishwasher at the end of each cycle, ensuring that dishes are properly cleaned and dried.
Causes of a bad drain pump can include wear and tear from regular use, blockages from debris, or electrical malfunctions.
Symptoms of a bad drain pump include:
- Water not draining from the dishwasher
- Unusual noises during the drain cycle
- Error codes related to drainage issues
- Water pooling at the bottom of the dishwasher
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dishwasher drain pump not working Steve E. • Tampa , FL • January 14, 2015
When the wife told me the dishwasher was leaving water in the bottom of the tub I hoped it'd be that the filter was just clogged. Nope. We usually clean our dishes before cleaning them which always makes me laugh but the drain was clear after 9 years of use, so I figured it was the pump. This was a $200 minimum for the appliance guy to replace, so I thought I'd try and do it myself.
Job wasn't too bad. Found a youtube video from another machine than mine which I hoped would help.. these...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268395
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268325
Do-It-Yourself Stories from Customers like You
Parts had warn and broken off of top rack of dishwasher Linda M. • Minerva , OH • November 30, 2014
Husband replaced them with new parts we purchased from Appliancepartspros.com.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8269208
Do-It-Yourself Stories from Customers like You
Would not complete a cycle the clean light would flash seven times indicating a faulted heater circuit ohm check good on the element thermistor would not open a 75 to 80 deg Ralph B. • Watauga , TX • October 21, 2016
Unplug the old twist remove. Push the new one in twist,plug the wires in. Flop around on floor under sink to hook every thing up.
Read more
More