Kenmore Dishwasher 665.17572202 (66517572202, 665 17572202) Parts

Genuine Whirlpool part

Clip, Cupshelf

By: Whirlpool

Part Number: 8269736

$34.73

Compare At:: $40.98
You Save:: $6.25

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Capacitor Shield (Protective Cover)

By: Whirlpool

Part Number: 8534946

This replacement capacitor shield protects the appliance's capacitor from debris, contact and shorting, helping extend component life and reduce electrical faults. It installs over the capacitor to block dust, wiring contact and accidental damage. What it does:

Covers and protects the capacitor from physical contact, dust and loose wiring
Helps prevent short circuits and arcing caused by accidental contact with the capacitor
Useful when existing shield is cracked, missing or deformed
Can reduce risk of intermittent electrical faults related to exposed capacitor

What's included:

One capacitor shield (protective cover)

Install notes:

Always disconnect power to the appliance before servicing
Capacitors can hold a charge; discharge safely before touching electrical components
Remove necessary access panels to reach the capacitor; replace shield without stressing wires

$13.48

Compare At:: $16.18
You Save:: $2.70

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Panel

By: Whirlpool

Part Number: W10871198

$67.95

Compare At:: $80.86
You Save:: $12.91

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Best Seller

Genuine Whirlpool part

Push On Retainer Nut

4.8 (4)

By: Whirlpool

Part Number: WP3400931

The Whirlpool push on retainer nut is an OEM replacement part responsible for securing the heating element in the dishwasher. It is located in the base of the dishwasher's tub to hold the heating element firmly in place. The push-on retainer nut keeps the heating element securely connected to the dishwasher's electrical system while allowing for easy removal and replacement when necessary.

Over time, push on retainer nuts can become loose, worn out, or damaged due to regular use, vibrations, or accidental mishandling. If a retainer nut fails, it can lead to parts becoming unstable or disconnected.

Symptoms of a bad push on retainer nut include:

Loose or unstable dishwasher components
Parts falling off or becoming misaligned
Unusual noises during the wash cycle
Difficulty in securing components within the dishwasher

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models

Do-It-Yourself Stories from Customers like You Our dishwasher would not start. Rory D. • Fairfield , CA • May 18, 2020

A bit of searching on the internet narrowed the problem down to either the heating element or the control board. As I am not much of a diagnostician I decided to replace both. Along this same line, I would never have attempted these repairs if it hadn't been for the clear, easy to understand repair videos provided for each part. Further, my decision to do my own repairs was made easier because the prices of the parts was so reasonable. I took my time, reviewed the videos and replaced the... Read more

Best Seller

Genuine Whirlpool part

Dishwasher Drain Pump

4.9 (19)

By: Whirlpool

Part Number: WP661658

The Dishwasher Drain Pump is an OEM part for Whirlpool dishwashers. It is responsible for removing water from the dishwasher at the end of each cycle, ensuring that dishes are properly cleaned and dried.

Causes of a bad drain pump can include wear and tear from regular use, blockages from debris, or electrical malfunctions.

Symptoms of a bad drain pump include:

Water not draining from the dishwasher
Unusual noises during the drain cycle
Error codes related to drainage issues
Water pooling at the bottom of the dishwasher

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dishwasher drain pump not working Steve E. • Tampa , FL • January 14, 2015

When the wife told me the dishwasher was leaving water in the bottom of the tub I hoped it'd be that the filter was just clogged. Nope. We usually clean our dishes before cleaning them which always makes me laugh but the drain was clear after 9 years of use, so I figured it was the pump. This was a $200 minimum for the appliance guy to replace, so I thought I'd try and do it myself. Job wasn't too bad. Found a youtube video from another machine than mine which I hoped would help.. these... Read more

Part Number: 4392900

Color: Biscuit. Size: 1 qt. can uncut. Enamel paint.

Genuine Whirlpool part

Color Panel Kit (Black)

By: Whirlpool

Part Number: 8171555

Color: Black.

Genuine Whirlpool part

Heating Element Kit

4.8 (15)

By: Whirlpool

Part Number: 8194200

This dishwasher heating element is for stainless steel tubs only. Includes a new computer board that needs to be replaced along with the element. For plastic tubs use W10518394.

Do-It-Yourself Stories from Customers like You Bad heater element in dishwasher Randy R. • North Bend , WA • February 08, 2015

Replaced element, but new one had higher current rating requiring changeout of control circuit board making price much higher than for element alone. Note that this was with every parts dealer for this machine. Changing circuit board was easy, am former techie, hard part was getting access to rear of dishwasher. Due to design of kitchen I ended up removing back of peninsula cabinet instead of pulling machine out. Really hard part was getting my 66 year old knees to cooperate. Did have a small... Read more