Kenmore Microwave 665.61654100 (66561654100, 665 61654100) Parts

This replacement screw secures appliance panels, brackets, or internal components to keep them tight and aligned. Replace a missing, stripped, or damaged fastener to restore a solid, rattle-free fit and reliable operation.

• Fastens parts to the cabinet or frame to prevent movement
• Replaces missing, stripped, or corroded hardware that can cause looseness, vibration, or noise
• Helps correct gaps or misalignment after service
• Maintains proper support for covers, trims, or brackets

• Disconnect power; shut off gas/water if applicable before servicing
• Match screw length and location to the original position
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Repair or replace damaged clips/inserts before installing the new screw

Screw that secures appliance panels and components to restore proper fit and reduce movement. Use this direct-replacement fastener to swap out stripped, missing, or damaged screws that cause loose panels or rattling. What it does:

• Secures panels, trim, brackets, and internal components to maintain alignment and prevent vibration.
• Replaces stripped, corroded, bent, or missing screws that can cause rattling, gaps, or loose parts.
• Restores proper fit and function of assemblies when original fasteners fail.
• Small part — confirm size and thread match your appliance before ordering.

• Disconnect power (and water, if applicable) before starting any repair.
• Use the correct screwdriver or bit; avoid overtightening to prevent stripping or cracking.
• Replace all like fasteners in the same area if multiple are damaged to ensure even fit and alignment.

This inverter converts the refrigerator's incoming power and controls compressor speed so the cooling system runs efficiently. Replacing a failed inverter restores proper compressor operation and helps return normal cooling performance. What it does

• Converts incoming AC power to the DC signals the variable-speed compressor needs
• Regulates compressor speed for temperature control and energy-efficient operation
• Works with the fridge's main control systems to manage compressor operation

• Disconnect power to the appliance before beginning any service to avoid shock
• Handle the board by its edges and avoid touching components; observe ESD precautions
• Mount and connect using original-style fasteners and harness connectors; verify secure, corrosion-free connections
• Check compressor, main control board, and harness for related issues if symptoms persist after replacement.

A replacement mounting screw used to secure appliance panels and components. This OEM-style screw helps restore proper fit and reduces rattling or loose parts for a finished, secure assembly. What it does:

• Fastens control panels, brackets, or interior trim to the appliance frame
• Restores proper alignment when an original screw is missing or stripped
• Stops rattling or vibration caused by loose fasteners
• Matches OEM fit for reliable fastening when the correct screw is used

• Turn power off at the breaker before servicing electrical appliances
• Match screw length, head style and thread to the removed fastener before installation
• Use the correct screwdriver or bit to avoid cam-out or head damage
• Do not overtighten; snug until secure to avoid stripping threads or cracking components

Replacement interlock spring that provides tension for the appliance door latch so the door closes and the interlock switch can engage for normal operation. Restores reliable door engagement and latch return in compatible Whirlpool appliances. What it does:

• Provides tension to the door latch/interlock assembly so the door stays securely closed during use.
• Ensures the latch returns to the closed position and allows the interlock switch to complete the appliance's safety circuit.
• Helps resolve symptoms such as a loose or non-returning latch, door that won't stay closed, or cycles that stop because the door won't engage.
• Works as a direct replacement for the listed interlock spring in compatible Whirlpool assemblies.

• Disconnect power to the appliance before servicing to avoid electric shock or injury.
• Basic hand tools are typically required; panels or the door may need partial disassembly—refer to the model's service guide.
• Inspect the latch, striker, and interlock switch for wear or damage and replace if needed; improper installation can prevent correct engagement.

This replacement door handle restores a secure grip and makes opening the appliance door easier and safer. It's a direct-fit style designed to match the original part's shape and function for a clean, factory look. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces cracked, loose, or broken handles that affect door use
• Helps restore proper alignment and ergonomics when the original handle is damaged
• Reduces the risk of sharp edges or failure from a compromised handle

• Disconnect power to the appliance before starting any repair
• Typical installation requires removing a few screws or clips; keep fasteners for reassembly
• Use hand tools only and avoid overtightening screws to prevent stress cracks

This is a replacement screw used to secure appliance parts and panels. It restores proper fastening where the original screw is missing, stripped, or corroded. What it does:

• Secures panels, brackets, or components in place to maintain appliance alignment
• Replaces lost, damaged, or rusted fasteners for a reliable hold
• Helps prevent rattling or movement caused by a missing screw
• Works wherever the OEM screw specification and fit match

• One screw

• Use the matching screwdriver or driver bit; avoid overtightening to prevent stripping
• Disconnect power and follow appliance safety precautions before servicing

This membrane switch is the flat control-panel button assembly that replaces worn or unresponsive touch buttons so the appliance's control functions respond correctly. It restores reliable button input on the control surface. What it does

• Replaces the flat push-button/contact layer on the control panel used to register user key presses.
• Restores response for buttons that are intermittent, unresponsive, or require extra force.
• Helps resolve control-panel input issues that prevent selecting cycles, settings, or options.
• Works with the existing control board and ribbon/flex connector to transmit button signals.

• One membrane switch (control-panel button assembly).

• Disconnect power to the appliance before starting—risk of shock.
• Remove the control panel or user interface per the service manual to access the membrane; handle with care.
• Align the membrane and its ribbon/flex connector precisely; avoid creasing or contaminating contact surfaces.

Color: Bisque

*** Note: This glass tray has 3 partial-circles to engage the coupler. In some cases, the factory used a tray that has 3 triangles. For that glass tray use part# W11367904. ***

The Cooking Tray is an OEM part for Whirlpool microwaves. This glass tray sits on the turntable support and rotates to ensure that food heats evenly throughout the cooking cycle. It is designed to fit securely within the microwave, providing a stable platform for various dishes and containers.

Over time, the cooking tray can become damaged due to regular use, drops, or exposure to extreme temperatures. If the tray is cracked or broken, it can lead to uneven cooking and potential safety hazards.

Symptoms of a bad cooking tray include:

• Visible cracks or chips on the glass surface
• The tray not rotating properly
• Uneven heating or cooking of food
• The tray wobbling or not fitting securely on the turntable support

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Fastener screw