Kenmore Range 790.46813991 (79046813991, 790 46813991) Parts

I verified the controller was bad and replaced it. Basic trouble shooting was to rule out the temp sensor. The control board was then the most likely problem Read more

I bought replacement hinges and installed them myself. The hardest part of the job was the first part: to remove the oven door you have to lock the old hinges with small brackets, and one side did not want to lock--I had to use a hammer. The door was heavier than it looks, but the only challenge after that was the fact that the edges of the door parts were sharp. I probably should have worn gloves when handling them. You have to take the door apart to insert the new hinges, but it's just... Read more

Very easy fix. I couldn't find the part number so actually ordered this part just by looking at the picture. Fortunately I guessed right and the part was exactly what I needed. I just had to slip the part over the part that holds the temperature control knob on my gas cook top. I received the part the next day after I ordered it! Very satisfied. Read more

Very easy fix. Lifted off the grill and burner. Unscrewed 2 screws. Pulled the burner pan up and off. Disconnected the wire to the igniter. Used needle nosed pliers to remove the clip holding the igniter in place. Removed the gasket from the old burner pan. Placed the new igniter in the hole of the new burner pan and slipped the old clip on the igniter to hold it in place. Then put the old gasket on the new burner pan. Then connected the igniter wire to the new igniter and put the burner pan... Read more

Got out my old manual, which provided me with the needed info. Called your customer service and with their GREAT help from them------- a new burner and burner caps were ordered. Arrived today and yours truly did the installing. And it works! Saved alot of money not having a service call! Oh, did I mention---I am a 87 yr old Grandma! Thanks for making this possible. Read more

Ordered a new clock/timer control. This was very easy to install the real trick was removing about 8 wires and 4 plug in connectors from the board and then reinstalling them back in the same location as the were before. I took a photo of the board with my IPhone before taking all the wires off, this made it very easy to reinstall the wires on the same terminals as before. There are 2 additional connectors on the board that a flat ribbon cable from the touch button panel attaches to. Do not just... Read more

Ordered new hinges and installed following the instructions on your video. Very easy repair thanks to your video. Thanks Read more