Beejay November 17, 2012 for Model Number plmvz169gcc My light works and welcome etc flashes but buttons do nothing. What do I need?
1 Answer Hello Beejay. You will need to order part number 5304443989 if the buttons on the unit do not work. Read More...
John M September 11, 2012 for Model Number Frigidaire GLMV169 sereies microwave; esxact model:PLMZ169GCC All microwave functions accessable from membrance key pad seem to work. The "CLOCK" and the "FAN HI/LO" functions do not work. I do not know if I should replace the Key Pad Membrane Switch #5304443989, or the Control Board #5304468192. The Key Pad cost is much less in cost. I am not sure which is the most likley problem, and would like to avid replacing the Control Board. Any suggestions? Thanks!!
1 Answer Hello John. Based on the information you provided, if some of the buttons work and others do not, it sounds like the key pad 5304443989 is the part that needs to be replaced on the unit. Read More...
Adam B. June 27, 2012 for Model Number Plmvz169hca Water got into the microwave touch panel. (don't ask how) everything works except the fan button. Hi/lo I push the button and it seems to click or something but nothing happens. My theory is that I should replace the control board. Is this correct?
1 Answer Hello Adam. If the membrane is working, but no power is coming from the relay on the board, you will need to replace the control board 5304468192. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Dean L. May 06, 2012 for Model Number plmv169DCC The start button has stopped working. Would that be a sensor pad or a board problem?
1 Answer Hello Dean. Based on the information you provided, it sounds like the membrane switch 5304443989 is bad and will need to be replaced in the unit. Read More...
Steve April 18, 2012 for Model Number GLMV169DBC The microwave works fine, but there is no light on the touch pad. It has been gradually dimming and now is gone. I notice there are several layers of panels in the diagram. Which one do I need and is it a plug-in type connection? In other words, is it easy to replace?
1 Answer Hello Steve. If the display is not working, you will need to replace the control board 5304468192. The board are not hard to replace, but you will need to remove the control panel from the microwave to access and replace the control board. Hope this helps. Read More...