Rory June 27, 2023 for Model Number FFSC2323LS1 refrigerator model number FFSC2323LS1 my ice maker stopped making ice I have drinking water in the door (working) but no ice the ice maker P/N #241709804 model #IM20-1 what is the the correct ice maker ?? I come up with 3 different ice makers please help Thank you
Pattie April 21, 2022 for Model Number 53044688880 Hi, I only need the cover of this ice maker, shown as 43 on the diagram. Is this available as a separate item? Thanks,
1 Answer Pattie, if the model number of your appliance could be provided in a new question, this will allow the most accurate information to be presented. Read More...
Jose V September 18, 2019 Is the Ice maker part number 241709804 compatible with any other ice maker? for example the 5303918344 ? thanks for your help on this.
1 Answer Jose, We can only suggest the manufacturers recommended part and would need your model info for that. Sorry for any inconvenience. Read More...
Tony March 25, 2018 for Model Number PHS69EJSS0 My ice maker is not working. The currently installed part no. is 241709804, but your compatibility check says it is not compatible with the model number of my refrigerator. The part this shown as "compatible" would clearly not fit my refrigerator. Should I just order the same part number for the ice maker that I currently have?
Peter May 25, 2017 for Model Number FGHS2355PF I'm trying to figure out how to reduce the cube size in my ice maker (Servo P/N 241709804, Model No. IM20-1). The ice maker is not "side" mounted like most of the "fix it" videos show (I've yet to find a video with this particular model anyways). Do I need to remove the entire ice maker in order to adjust the cube size, or does the little translucent knob (to the left of, and slightly below, the power switch) have something to do with it? Thanks!
1 Answer Peter, You do not need to remove the ice maker, to adjust the water level, and yes the " little translucent knob" has to be removed. here are the instructions " The water fill can be adjusted without removing the ice maker cover. To adjust the fill size, remove the small round plug next to the On/Off Switch. Insert a #2 Phillips screwdriver into the hole about an inch or until it engages the Water Fill Adjustment Screw. Turn the screw clockwise to reduce the fill size; turn the screw counterclockwise to increase the fill size. One turn equals approx 20cc (0.68 oz). The correct fill is 85 to 95cc (2.75 to 3.25 oz). When a water valve is replaced, check the fill volume. " Be careful with the adjustments, a 1/2, and no more than 1 complete turn of the adjustment screw at a time, you can cause the icemaker to overflow if you're not careful. Read More...