Jim February 13, 2024 for Model Number 79078303014 Looking at the picture of the Frigidaire 316536602 igniter/office assy the part I'm looking for is a small white part that delivers the spark to ignite the gas coming out of the burner.
1 Answer Jim, This comes with the assembly and is not listed as a separate part for your model. Read More...
Deepak August 06, 2023 for Model Number 79072402013 I am looking for the actual ignitors for this model...the one I currently have are worn out. Trying to see if this can be ordered as a stand-alone part or this part of an assembly. Thanks
Kevin April 02, 2022 for Model Number 790.75233310 My front Right and Center burners are not lighting up. I've tried cleaning it but still does not work. Gas is there as it will light up and work by using a lighter. Is my best option here is to replace the ignitor? If so, what is the part number? the front right is our main burner. We can hear clicking when trying to stat but flame does not. thanks in advance Kevin L
1 Answer Kevin, if the burner heads and the maintop where they sit have been thoroughly cleaned, it would be very likely that the ignitors may have a hairline crack. It would be recommended that the wires are checked to ensure that they are not frayed. If not, the orifice holders (the manufacturer does not list the ignitors as being available separately) would need to be replaced. The right front 316572103 and center 316536623 orifice holders would be used with the model provided. Read More...
Rich March 01, 2022 for Model Number FGGF3035RFB My left front burner does not click or spark. All other burners work fine. Any idea which part may need replacing? Thanks.
1 Answer Rich, It would be recommended to check to make sure that the ignition switch is good. Test it for continuity and if there is no continuity then the issue will be a faulty ignition switch. Read More...
Annette Lofton December 14, 2020 for Model Number MODEL_PBK0190 My oven has stop working. One day I went to press the button to turn it on. It made a real loud frying sound like some wires were frying and the pilot light would not come on. the top of the stove is working fine all the burner comes on and off
1 Answer Annette L, Based on the information provided I would suggest checking the wiring to the ignitor, then check the amount of voltage to the ignitor. If the wiring is good and there is 120VAC to the ignitor and it don't light up then the ignitor would need to be replaced. If there is no power to the ignitor then it is likely to be a control issue. Read More...
Gary July 16, 2018 for Model Number FFGF3047LSF The ignitor on my left front burner continues to spark about every 15 seconds. Gas is turned off. It will light fine if needed. I cleaned everything as best I can. Any ideas out there?
1 Answer Gary, it sounds like the switches are bad and need to be replaced, the part number is 316580611, they will mount on the front of each gas valve. Read More...
Bud November 06, 2017 for Model Number FGGF3054KFH Left front burner igniter does not spark. How do I access the wire connection to see if it is snug?
1 Answer Bud, To access the igniter wire you will need to remove the grates, burner cap and burner head and then use a putty knife between the main top and the control panel and pop the main top up. You will have access to the wire once the main top is lifted. Read More...
Bud November 06, 2017 for Model Number FGGF3054KFH How do I access wire connection to left front burner igniter which will not spark?
1 Answer Bud, If you remove the grates, burner caps and burner heads, you should be able to lift the main top in order to access the wire for the igniter. Read More...
Stanley September 26, 2017 for Model Number FFGF3051LSE i have a stove that has 2 igniters out. When you turn on the gas valve they do not click. I was wondering if it's the igniter/orifice Assy or if its the igniter switch assy. any suggestions please?
1 Answer Hello Stanley. Turn on a switch that does work and see if the ignitors spark. If so, then the spark switch harness is bad and will need to be replaced. Read More...
Tushar April 23, 2016 for Model Number 79072709011 None of my surface burners light up with the igniters. I am able to light them with a lighter though. My oven works fine. When I turn on any knob, I see 3 of the ignitors sparking and 2 stay dark. However, the spark does not seem to be strong enough to light the corresponding burner. What should I try to replace first? Should I try replacing one orifice/assembly at a time. Or is the problem something else?
1 Answer Tushar, With none of the burners igniting then the most likely cause would be a failed spark module. The spark module part number is 5304508269. Read More...