Customer Questions and Answers for Compressor Start Kit by Frigidaire

Hi John. Look at the relay with a magnifying glass if needed. You need to insert the red wire to the L-1 connection. You insert the white wire to the -n- terminal . If the wire connector is a different size in the relay you need to use the jumper wire to allow you to insert it into the new relay. Part # 5304491941. Thank You.

Hello Robert. Yes, it could be that the relay 5304491941 is bad and will need to be replaced. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. Hope this helps. http://forum.appliancepartspros.com/refrigerator-freezer-repair/193358-freezer-fridge-not-cooling.html

Hi George. There is a "block" type of capacitor that has two terminals and simply pulls out of the top of the old relay. If you did not get one in the new kit, then you need to use the origional one. There is a red wire that goes to the L- terminal marked on the relay. The blue or white wire is connected to the N-terminal on the relay. You will need to use a pick tool to release the "locks" on the terminal lead connectors, they are challanging to get out. Good Luck. Thank you.

Hello Rick. If the old connector on the refrigerator does not work, you will need to rewire the new plug to fit the relay. Hope this helps.

Hello Darryl. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. Hope this helps. http://forum.appliancepartspros.com/refrigerator-freezer-repair/193358-freezer-fridge-not-cooling.html

Hello David. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. Hope this helps. http://forum.appliancepartspros.com/refrigerator-freezer-repair/193358-freezer-fridge-not-cooling.html

Hello Roger! The thermostat would not be an issue. You seem to be having a bad start relay 5304491941 or compressor 5304511983 issue. Hope this helps!