Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Customer Questions and Answers for Compressor Inverter Board by Ge

Best Seller
Manufacturer Part
4.89 (64)
By: Ge
Part Number: OEM18998775
Manufacturer Part Number: WR87X29409

The Compressor Inverter Board is an OEM part for GE refrigerators. It controls the operation of the compressor, adjusting its speed to optimize cooling efficiency and energy consumption. This component is crucial for maintaining consistent temperatures inside the refrigerator and ensuring smooth, reliable performance.

Causes of a bad compressor inverter board can include electrical surges, overheating, or component failure due to wear and tear. When the inverter board malfunctions, it can lead to inadequate cooling and increased energy usage.

Symptoms of a bad Compressor Inverter Board include:

  • Refrigerator not cooling properly
  • Unusual noises coming from the compressor
  • The compressor running continuously or not running at all
  • Error codes or flashing lights on the control panel

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

More
$159.61
Compare At:
$189.94
You Save:
$30.33

IN STOCK
Ships Today Guaranteed
Add to Cart

Questions & Answers

For Ge Compressor Inverter Board (Part Number: OEM18998775)

1 Answer

Hello Chris, On the inverter there should be a black blue and brown that goes to compressor. The other wire goes to the J15 connector at the main control board.

Read More...

1 Answer

Hi Stevo. Remove all compressor leads connected to the inverter board after marking them to insure proper replacement. I would use a volt/ohm meter part # MA-DM1 to assist. you in your diagnosis. Make sure all windings ohm out to 10 ohms and not shorted to chassis ground. The brown , blue , and black wire going directly to the compressor. From the board on the red and white input voltage to the inverter board is 120 vac. the output is measures on all 3wires from 80-240 vac and should read 57-104Hz. It is a 3-phase inverter board output and it will damage the compressor when 120 vac is directly applied to the compressor. If your model ends in the last few letters (after the letter A)- in BB, CC or WW the inverter part # is WR87X29409 is not available. Sorry. Thank You.

Read More...

1 Answer

Hi Joe. Is the evaporator fan turning? That motor with a thermistor is part # WR60X10074,without is part # WR60X10185. Is the top evaporator cover frosted up? If so you will need to change the defrost thermostat part # is WR50X29776. There is also a thermistor in there as well part # WR55X10025. These control the defrost time. Is the compressor on top and condenser fan turning? If the condenser coils are stopped up this will boil the freon. Clean the coils. The condenser fan motor is part # WR60X10209. Make sure nothing in the shelves or bins are holding the door's slightly open. Hope this helps. Thank you.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store