Don August 01, 2013 for Model Number DCVH660GH0BB I do not understand where this part goes or how to adhere it in place? Thank you for your help. Felt Cleaning Part Number: AP4421328 MFG Part Number: WE9M31 Read more: http://www.appliancepartspros.com/ge-felt-cleaning-we9m31-ap4421328.html#ixzz2anAm0Z2R http://www.appliancepartspros.com
1 Answer Hello Don. The part snaps onto the front panel of the dryer. If goes to the top section and is used for the glides to install into the and drum to ride onto when running. You must remove the front of the dryer to install the part. Read More...
Amy June 14, 2013 for Model Number DCEVH515EF0WW Hello, Is there a trick to removing the front bearing from the front panel? Are there screws or do we just try to "jimmy" it out? Also, we obviously need new bearings and glides, but does the felt piece need replacing as well? It looks to be intact and in good shape. If it needs replacing, is it required to glue it in place? It sure does not look as though it was glued in the first place. Thank you!
1 Answer Hello Amy, The front bearing snaps into the front panel. It really isn't hard to remove or re-install. You just have to make sure not to pinch any wires. Note how the wires are routed before dis-assembly and maybe take a few pictures with your cell phone from different angles to prevent confusion during re-assembly and you will be fine. If the seal fits the front of the drum good it will not need replacement. If it does need replaced, it does glue in with high temperature adhesive (AP4284239). Read More...
Julie May 21, 2013 for Model Number DBVH512EF0GG I need to replace the top/front bearing. I know I need the 4 slides (2 white and 2 green). Do I need to order the felt or does that come with the front bearing? Also, do I need the whole rear bearing kit or just the bearing sleeve?
1 Answer Hello Julie. You need 2 white WE03X37318 and 2 green WE03X37317 slides. All other parts needed will need to be ordered separately to repair the unit. Read More...
Maria May 12, 2013 for Model Number DCVH515EF0WW I have GE dryer DCVH515EF0WW our clothes get stuck in the top of the bearing section and it is also making a squeaking grinding noise. Do you think it is just the felt belt? Thaks for your help Maria.
1 Answer Hello Maria. You will need to replace the 4 glides, front bearing, and the rear bearing kit on the unit to repair it. Read More...
Tara January 28, 2013 for Model Number DHDVH52EFOWW I know I need to replace front drum bearing kit and slides, but how do I know if I have to replace the rear bearing kit? Out of the previous questions, the rear bearing kit was only metioned once??
1 Answer Hello Tara. If the front bearing and glides are bad, it is best to go ahead and replace the rear bearing sleeve WE1M462 in the unit. If the front is bad, the tub drops and wears the sleeve in the unit. Read More...
Dave January 19, 2013 for Model Number Dbxr463eb0ww Can I substitute white dryer drum slides for green ones? Thanks
1 Answer Hello Dave, The white and green slides are made of 2 different composites and cannot be interchanged. Read More...
Lance January 06, 2013 for Model Number dcvh680ejomv I am ordering the top bearing support,What slides do I need for this? And which felt kit? Thanks in advance for your help..Lance
1 Answer Hello Lance, You will need bearing slide WE03X37318 and dryer felt seal WE09X27634 Read More...
Brian November 11, 2012 for Model Number dbvh512ef0ww general electric dryer I need to get a top bearing and slides and the piece of felt. I was hoping you could give me part numbers and the location of the slides, seems that there is two different colors. The one I'm repairing the bearing and slides were destroyed not much to go off of. Also, do I need to order seperate parts or is there a kit I can order? Thanks.
1 Answer Hello Brian! The top bearing is part number WE14M124, this includes the felt. You will need two white slides WE03X37318 and two green slides WE03X37317. Here is a link from our repair forum with information regarding the location of each slide. Thanks! http://forum.appliancepartspros.com/dryer-repair/38865-ge-dryer-front-drum-bearing-slides-glides.html Read More...
Kevin September 23, 2012 for Model Number dcvh515efoww Hi, my problem is that my cloths get stuck in the upper bearing housing is that bearing going bad.I also have a sqeaking sound in it now.
1 Answer Hello Kevin. You will need to order and replace the glides, upper bearing WE14M124, and the rear bearing kit WE25M40 on the unit. Read More...
John Q. June 12, 2012 for Model Number GE DBVH 512 EF0WW How do you get the old drum support bearing off and replace with the new one? Do I have to remove the dryer lint trap?
1 Answer Hello John. You will need to remove the front panel of the dryer to access and replace the drum support bearing in the unit. Then you can access and remove the screw securing the drum support in the unit. Read More...