Jodddo August 18, 2017 for Model Number JGS905SEK2SS I'm getting the 'F7 db' error. I'm only able to click on the Start and Clear which I will get a sound, all other buttons are not responding. The only button that does anything is the Clear button which resets everything. I previously replaced the the ERB (AP4510170) about 2years ago, but wondering if the issue is now with the panel itself. Are you able to diagnose it as being an issue with the details or further analysis is needed to determine?
1 Answer Jodddo, The part number that would be needed for this issue would be WB27T10760. Read More...
Paul August 20, 2015 for Model Number JGS905SEK1SS Our GE range just started flashing an F7 message - there is a number on the other side (maybe 56). Understand this may be just a keypad (AP4510170) issue but were advised it could be the oven control (AP3860586) and that it would be best to replace both parts. Any danger of damaging the new part if only ordering the keypad and it turns out the oven control was bad? Any thoughts or advice?
1 Answer Hello Paul. Shorted matrix or START key. Determine if problem is with key panel or control by disconnecting ribbon cable and measuring flat cable. Allow up to 1000 ohms when pressing a key. If so, replace the control panel. If panel is good, replace the board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Andy October 13, 2014 for Model Number JD900BK2BB The Bake and Oven Light buttons quit working on my range panel, all other functions are fine.. no error codes, looks like I may need to replace the keypad WB27T10760 or maybe the oven control WB27T10416. I'm thinking it's the key pad ??? Any way to tell for sure?
1 Answer Hello Andy. Yes, based on the information you provided you will need to order and replace the keypad assembly on the unit. Read More...
Michelle L September 12, 2013 for Model Number JS900SKSS How do I replace Keypad WB27T10760 Myself? Can you please advise? Keypad was beeping and displaying error code F7 dC. I have to turn off at breaker after using cooktop. thanks Michelle L
1 Answer Hello Michelle. 1. Turn the power off to the unit. 2. Remove all knobs. 3. Unscrew all faceplate retainers while holding the faceplate against the control trim. The retainers must only be handtightened. 4. Faceplate can now be removed. Read More...
Matthew October 14, 2011 for Model Number PGS908SEM1SS Hello - The Part number on the GE website ( KEYPANEL SUPT ASM (BK) 17 WB27T10760 $122.00) is different than the part number on Appliance Parts Pros. Why is that? Thanks, Matthew
1 Answer Hi Matthew. Even though it is the exact orgional part, we need our own part #'s to keep up with inventory data of our own. Part # is WB27T10760. Thank You. Read More...