1 Answer Hello Jeff, You will need to order WB27X32766. This is the only magnetron listed a s a satisfactory replacement for the model number provided. Read More...
Israel November 23, 2013 for Model Number JVM1790SK01 About the magnetron for this model can I use a 050GT insted of the 21GT that came in . Is the same model LG 2M246 what the diference
1 Answer Hello Israel. Based on the model number you need to order and use WB27X32766 for the magnetron. Read More...
1 Answer Hi Olin. Usually a high voltage issue will be noticed if there are sparks or a deep erratic growling noise along with it. Use a volt/ohm meter part #@ MA-DM1 to assist you in your diagnostics. Disconnect the mag. leads and measure the mag terminals for 1-ohm or less. (Good). Then measure each terminal to ground to check for no-(infinity) ohms that tells us the magnetron is not shorted. If it is then it is part # WB27X32766. Look at the individual external magnets for cracks. Check the diode part # WB27X10037 and the capacitor part # WB27X11031 for proper values. You can not check the supply voltage to a magnetron (or any high voltage device). It is approx. 14,000 volts and is a killer. Thank You. Read More...
Arnie S. March 24, 2012 for Model Number jvm1790 Need new magnetron, is there a kit or just replace magnetron?
1 Answer Arnie, there is no kit available. The replacement magnetron for GE microwave jvm1790* models is part number WB27X32766. Thanks! Read More...