Crystal November 06, 2018 for Model Number 79577719700 Is there a wiring diagram available? I have received the new valve, but now realize the connection are not form fit unique... doh! I have for small connecters (bluwe and purple wires) coming from a red connector plugged in to the fridge and two larger connectors( one with a red wire) coming from a blue connector plugged in to the fridge. any help would greatly be appreciated!!
1 Answer Crystal, Unfortunately we would not have a wiring diagram for this model due to it being a Kenmore model. You may want to check with the manufacturer to see if they can get the wiring information for you. Read More...
Michael July 28, 2017 for Model Number model LRFD25850ST The replacement valve only has 6 electric connections, the original has 8...the replacement valve # is 5221jA2006D..is that the right valve for my LG?..if so which wires do I disregard?
1 Answer Michael, The correct replacement water valve for your unit will be part number 5221JB2006K. Read More...
George May 23, 2017 for Model Number LG 25860 Is there any information into which line should go in which hole in the inlet valve? There are 2 1/4 inch and 2 5/16 inch. Can someone confirm? Also from a wiring perspective the red and blue wires from the inlet valves that plug into the fridge, Can anyone with this fridge tell me is the blue on the left or the red when standing behind the fridge? I have a fridge someone had pulled the inlet valve out of and trying to put one back in and unsure of which connections go where.
1 Answer George, The 5/16" tubing that goes up to the filter will go on the green ring, the 1/4" coming back will go to the gray ring on the valve, the 1/4" from the icemaker will go to the orange and the other 5/16" tube will go to the white. We do not have information on the wires but should only go in one way. Read More...
Keith S March 09, 2017 for Model Number 795.77543600 I have a Kenmore elite, water dispenser is working OK in the door but there is no water going in through the water filter could this possibly be the water control valve or what would you may suggest it could be. Also the ice machine is working OK Just no water going to the filter.
1 Answer Keith, The water would be going through the filter head if the dispenser and icemaker are working and if there is no water going into the filter itself you will want to check to make sure that the filter is in all the way and if it is then the filter head would need replaced. Read More...
Anthony January 23, 2017 for Model Number 795.78713800 I need to replace the water valve with part no. 5221JB2006K but am not sure that the wiring is included with the part as most pictures do not show any wiring. Is there another part I need for the wiring or is it include with the above mentioned part?
1 Answer Anthony, The wiring is not included with the water valve assembly. The manufacturer is not showing the wire harness being available. Read More...
Bruce July 24, 2016 for Model Number 795.78549.800 Kenmore elite refig Replaced valve assembly because ice maker over flowed ice and very little water coming out of water filter. Plus valve was making a sound when using. Thought I put the wires and hoses back to the same position they ouyt came from(old assemble). Now No water coming out of filtered water. Is it possible I screwed up with installing new valve assembly. Like hoses reversed. Is there a assembly schematic to installed valve??
1 Answer Bruce, Unfortunately there is not a schematic showing the hookup of the water valve on this unit. If there is no water at all then it could be a clogged water filter or a bad filter head that is causing this issue. Normally if you have the tubing connected incorrectly, water will pour out at different locations than where it is supposed to and the wiring would be similar in that the water would come out of icemaker instead of dispenser. Read More...
John R March 10, 2016 for Model Number LG LRFD25850ST My ice maker stopped making ice. Water dispenser works, water pressure is fine, and temperature is good. I replaced the water intake valve with part 5221JB2006K. The ice maker is dry, water is not getting to maker. No ice in the fill tube. Is the problem with the ice maker assembly part 5989JA0002N?
1 Answer Hello John. If the valve is new and the fill tube is not frozen, you will need to replace the icemaker on the unit if the temp is 0 to 5°. Read More...
Carrie August 05, 2015 for Model Number 795.77549600 When I use the water dispenser in the door, there is a hummng in the back of the refrig. and water sparys out of the connection in the back. Does this mean the water is not getting through the water inlet valve? I get water and the ice maker appears to be working fine. The water only sprays out form the back connection if I use the water dispenser.
1 Answer Hello Carrie. This sounds like one of the water tubes is bad and will need to be repaired or replaced on the unit. You need to check and see where the water is spraying out from. Read More...
Jim September 12, 2014 for Model Number 795.71019.010 I have to replace the water assembly valve part 5221jb2006p. How do I remove the tubing without breaking it?
1 Answer Jim, To remove the tubing. There will be a clip between the ring around the tubing and the valve housing. Remove the clip and push in on the ring around the tubing. While holding the ring in pull out on the tubing. Read More...
Bob July 05, 2014 for Model Number 795.75544401 ice maker and water dispenser not work. I changed water filter, I defrosted refrigerator to ensure no lines were frozen. I also changed the Water inlet Valve part # 5220JB2001A. Can it be the filter head (is that where the water comes into the refrig since no water is getting to either water dispenser or ice maker part number 5230JA2003A . I am also trying to see how to disassemble this to replace, is all from the interior of the refrigerator or do I have to pull it out and disassemble from the back. THanks for your advice and I will use yor website to order any additional parts
1 Answer Bob, A way to determine if the water valve is faulty would be to check voltage at the valve. If the valve has voltage but not passing water through it then it would need to be replaced. The valve that would be needed is part number 5221JB2006K. If you disconnect the tube that is on the grey port and test push the water dispenser there should be water come out. This will tell you that water is getting through the filter head. Read More...