Jeff December 24, 2012 for Model Number RS2530BWP MY condensor fan is squeaking really loud. I think the approrpriate replacement is DA97-01949A but I am unsure. Can you verify this? Thanks
Daniel November 06, 2012 for Model Number Samsung RS2630SH The condensing fan is squeaking BAD I can see a broken plastic piece on the motor. It looks like there is a downward lean to the motor shaft. I understand that I need to replace this motor; however can I reuse the fan and does the new motor come with a new shaft?
1 Answer Hello Daniel. Based on the information you provided, it sounds liek the condenser fan motor DA97-01949A will need to be replaced. Read More...
Petter October 06, 2012 for Model Number RS2630SH I need to know how much voltage for evaporator fan to run, is it 110V?
Fernando September 04, 2012 for Model Number RS2530BBP Refrigerator My Refrigerator is making a noise is coming from the condenser fan motor. What can I do with?
1 Answer Hello Fernando. If the noise is coming from the fan motor, you will need to replace the fan motor DA97-01949A on the unit. Read More...
Yared July 02, 2012 for Model Number RS2530BBP My fridgerator is realy hot on the side & between the freezer & fridge part. Is that because of the condensor fan? The condensor fan motor is completely not working,it looks like burned up.
1 Answer Hello Yared. Yes, the condenser fan motor DA97-01949A, if bad, will cause the issue you are having. If it is bad, you will need to replace it or it can damage the sealed system on the unit.Test for DC power, 7V~12VDC, to the fan motor. If there is power there, and the motor does not run, replace the motor. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Bill June 10, 2012 for Model Number Samsung rs2630sh I bought a Condenser Fan Motor (AP4136538) from you guys and it's not running. Any ideas what it could be?
1 Answer Hello Bill. Test and see if there is power coming to the fan motor. If not, it sounds like the PBA DA41-00219C is bad and will need to be replaced on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
An T. December 05, 2011 for Model Number rs2630sh As a preventive care, what other parts should I replace with this? While i have the fridge pull out and opened up. Thanks
1 Answer Hello An. If the condenser fan motor DA97-01949A is all that is bad, you should be fine with just replacing the fan motor. Hope this helps. Read More...
Ark R. July 14, 2011 for Model Number RS2623SH Hi, I just purchased a replace motor condenser assembly and it did not come with a blade. So now I'm stuck with the old condenser with the blade and the new one w/o. Can someone please tell me is there a way to take the old blade off the old unit w/o breaking it and placing it on the new one? Or do I have to buy a new blade and spring? Thank you
1 Answer Hello Ark. You can remove the old fan blade DA31-00010D from the condenser fan motor and install it onto the new fan motor DA97-01949A. To do this you will need to pull on the fan blade center, not the blades of the fan, and pull it off the motor shaft. Once removed, you will push the center of the fan blade onto the new fan motor. Hope this helps. Read More...
Rosa July 10, 2011 for Model Number rs2630 I checked everything you suggested, but the condenser fan motor is working very slow.
1 Answer Hello Rosa. It sounds like the condenser fan motor DA97-01949A is bad and will need to be replaced. It should turn fast enough to draw the heat from the compressor. Hope this helps. Read More...
Rosa July 08, 2011 for Model Number rs2630ww I have replaced the main board like you sugest me to do,but my fridge is still not working. I tested and the compressor is working, so what else can I try?
1 Answer Hi Rosa. There is a condenser fan motor right next to the compressor. If this fan motor is not turning, then it will boil your freon, and cause a "no - cool". This part # is DA97-01949A. Double check all connections for correct tightness. Are any harness plug connections under your top cover, not plugged in properly? Is the evaporator fan motor running? This part # is DA31-00103A. The compressor relay is part # DA35-00099G. Thank-you. Read More...