Adrian December 10, 2014 for Model Number RB195ACPN/XAA-0001 What tools do I need to take the motor off my fridge?
1 Answer Hello Adrian. Unscrew 5 phillips screws of cover compressor. Disengage the housing connector. Remove the hooker of support circuit motor by lifting the hooker up and pulling it out. Remove the screw with a flat blade screwdriver. Remove the motor fan by pulling the fan out while grasping the motor part. Unscrew 2 screws fixed in the motor. Remove the hook of the motor cover with a flat-blade (-) screwdriver and then remove the motor. Read More...
Kevin November 09, 2014 for Model Number RFG297AARS/XAA This is my first digital refrigerator and I got it and plug it in and the fans do not come on. Is there a certain temp it gets to before they do.
1 Answer Kevin, You will want to make sure that the unit is not in demo mode. To exit demo mode you will press the left 2 top keys on the display at the same time. Read More...
Ben July 22, 2014 for Model Number RS2630SH My fan condenser motor appears shot. I am ready to order a new condenser motor with the white "encasement". I note it does not come with the fan blade. That is fine, as the current fan blade is fine (other than a little dust). However, I am having a hard time removing the fan (blades) from the broken condenser motor. There is a small tri-headed "pin" attaching it to the old motor. How do I remove the fan blades? Thanks!
1 Answer Ben, The condenser fan blade is just a part that pulls straight off. It may be on there tight and have to use force to pull it off. Read More...
Kyle W April 22, 2014 for Model Number RS2630SH/XAA I have a new motor and fan blade for the samsung refrigerator. Which way does the fan blade install on the shaft? There was not an original one there for me as a guide. It's a used unit and the prior owner installed a small desk fan to replace the original.
1 Answer Hello Kyle. The fan blade should only press onto the shaft one way. If you try the wrong way, it will not press onto the shaft. Read More...
Jennie March 13, 2014 for Model Number 8138437837 Hello I have a samsung refrigerator and for some reason the condenser fan motor stop spinning and I am wonder what might the problem be and how can I fix it ? And I am wondering if the motor need to be replaced?
1 Answer Hello Jennie. If there is power coming to the fan motor, and the motor does not run, you will need to replace the fan motor on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Long T. May 27, 2013 for Model Number samsung RS 2530 BSH Is this the right one for replacing my condenser fan motor samsung refrigerator RS 2530 BSH?
1 Answer Long, the condenser fan motor DA97-01949A is the correct replacement for your model RS2530BSH. This is condenser fan motor comes with the bracket. Thanks. Read More...
Justin April 25, 2013 for Model Number Samsung RS2630SH Hi, is this the correct condenser fan for a Samsung RS2630SH refrigerator? Also, please provide the fan blade number for this model. Thank you.
1 Answer Justin, the condenser fan motor only is part number DA31-00103A and the blade is part number DA31-00010D. You can also use the fan motor assembly w/ the support, part number DA97-01949A. Thanks! Read More...
Waldir February 17, 2013 for Model Number http://www.appliancepartspros.com/samsung-condenser-fan-motor-da97-01949a-ap4170193.html#qa1 Does the condenser fan motor come with the blade? How can I get it as a kit?
1 Answer Hello Waldir! No, the condenser fan motor DA97-01949A does not include the blade. The blade is part number DA31-00010D. Unfortunately, the manufacturer does not offer these parts as a kit. Thanks! Read More...
Manny February 02, 2013 for Model Number rs2530bbp samsung side by side refrigerator Condenser fan motor is making lots of noise can this unit be rebuilt. If not. when I buy condenser fan motor do I need to buy new blade new housing and does it come with a screw to hold fan blade on shaft.
1 Answer Hello Manny, The condenser fan motor cannot be rebuilt and would have to be replaced. There would be no other components to replace other than the fan motor. The fan blade just slides on and off the shaft of the fan motor. Read More...
Mark January 05, 2013 for Model Number samsung fridge Where is the fan motor located? Inside the refrigerator, inside the freezer, or outside both?
1 Answer Hello Mark, The condenser fan DA97-01949A is located in the rear of the unit next to the compressor. Read More...