Krystal July 17, 2020 for Model Number RF20HFENBBC/AA Will this drain clip work for my specific model?
1 Answer Al, Yes, this drain clip will work for your unit. Also, along with installing this clip. Pull the unit out and remove the drain, inside of it there will be what is know as a duckbill. Clip the duckbill end off so that there is an opening in the end of it. This should help keep the unit drain from getting clogged. Read More...
Kelly June 28, 2020 for Model Number RF217ACRS Hi, Will this part work for the model number RF217ACRS. Thanks, Kelly
1 Answer Kelly, it is possible that the drain clip DA61-14306A might work with your unit, however, the manufacturer recommended drain clip is part number DA61-03644A. Read More...
James June 21, 2020 for Model Number RF26HFENDBC/AA Icing up at drain. Plates of ice under crisper drawers. Which heater drain clip to fix it?
1 Answer James, That drain clip could help and will work. The reason it is backing up is that the defrost drain is clogged.DA97-04049D Read More...
Steve June 05, 2020 for Model Number RF260BEAESR/AA Can this defrost clip DA61-06796A be used as a replacement for the original part.
1 Answer Hello Steve, Yes, Sir, this clip can be used on the model provided. If you need a longer one, this one 819043 could also be used. Read More...
Matt June 02, 2020 for Model Number RF263BEAEWW/AA-0001 Ice maker clogs or stops making ice, what parts do I need?
1 Answer Matt, if the ice maker is having a lot of ice form around it, the refrigerator will need to be unplugged. From there, the ice will need to be removed using a small putty knife carefully. Once the ice is removed, the ice maker and auger assembly would need to be removed. This will allow for the air duct to be cleared, the sealant DA81-05595A to be applied to the seams of the bin section (inside and out, there will be some sealant that would need to be cleaned up during application), and the Y-clip assembly DA82-02367A to be installed. The ice forming is caused by an air leak between the ice bin section and the refrigerator wall. Read More...
John May 15, 2020 for Model Number RF18HFENBSR I have a similar looking clip on my Samsung refrigerator. Is this new one slightly larger and thus defrosts better, or keeps the ice from blocking the drain...DA61-06796A (part #)
1 Answer John, the drain clip DA61-14306A is longer than the drain clip DA61-07451A used with your model. As it is longer, it would conduct heat further towards the drain opening. However, it is recommended that the defrost drain tubes (DA97-11608A being farthest from the compressor and DA97-04049D being closest to the compressor) are inspected for any residue that may be causing them to clog up. Read More...
Bruce April 23, 2020 for Model Number RF263BEAESR/AA-0000 Does part #DA61-06796A work for Samsung Refrigerator Model RF263BEASESR/AA? The part shown appears to have a straight top, but the heater coil that it will be attach to -- has a very shallow U curve to it. And the heater coil feels quite solid and can't be straightened out.
1 Answer Bruce, the heater clip DA61-03644A would be used in the refrigerator and freezer sections. Read More...
Cheryl April 21, 2020 for Model Number RF263BEAESG/AA will part number DA61-O6796A fit the model given?
1 Answer Lana, That will clip around the defrost heater and the long end goes down into the drain hole so that it does not freeze up. Read More...