Rob April 29, 2023 for Model Number NE59M4320SS/AA-00 What is the difference between DG44-01002A and DG44-01002B infinite switches?
Evelyn January 20, 2023 for Model Number NE59M4320SS I can't use the two large burners due to over heating.
1 Answer Evelyn, This issue would be caused by a faulty infinite switch which would be part number DG44-01002A. Read More...
Norman May 13, 2022 for Model Number NE59M4320SW/AA Do know the correct part number for the left front dual burner Infinite switch?
1 Answer Hello Norman, You will need to order DG44-01002A for the front left infinite switch. Read More...
Fred January 18, 2022 for Model Number NE58K9430SS/AA I can not cook on two burners at the same time one burner will not heat. a sperate problem is one burner stays on high all the time.
1 Answer Fred, in regards to the element that will stay on high regardless of where the switch is set, this would be an infinite switch failure. In regards to the surface elements not operating with more than one being on, the switches would need to be tested for 240VAC input and output to identify if there may be a wiring issue or a switch issue. Read More...
Andy November 07, 2021 for Model Number NE59K3310SW/A The right front burner goes immediately to high, can’t adjust intensity, you can turn the smaller one and the larger on separately though, but agin both go on hi right away
Claudette Mitchell January 06, 2021 for Model Number FER300SB/XAA My glass top samsung stove right dual burner only work on high will DG44-01006B switch work on it
1 Answer Claudette, The part number showing for the infinite switch on your model is DG44-01002A. Read More...
Rory November 13, 2020 for Model Number NE58K9850WS/AA The hot surface light stays on all the time for the large heater radiant. Would this be related to a faulty regulator?
1 Answer Rory, the hot surface indicator light would be turned on by the contacts closing between the two terminals separate from the rest on one of the surface elements. It would be recommended that the range power cord is unplugged and each element tested for continuity at these terminals to identify which one has failed. If there is continuity, the element has failed and would need to be replaced. Read More...
Yuriy Dalakyan March 21, 2020 for Model Number NE58F9710WS/AA- ... I have to replace both elements control switches on the left side of the range. Left front is a dual element ( with the bridge) 7", 1800 W ( Bridge 2600 W) Left rear is a single switch 7', 1800 W Original part# is: PER001-02 and PER001-01 Hard to pick one special if you don't now the last digit after the dash on the model # (-0000, -00, -01,-02, -03, -04, ) and not a lot of description on the product. Can you help me to pick the right one?
1 Answer Yuriy, The part numbers the switches will be left front DG44-01006A and left rear DG44-01009A. Read More...
Rc September 04, 2018 for Model Number NE58K9500SG/AA Both large front burners immediately go to high heat when switch is turned on regardless of setting used and remain on high heat throughout. Cannot use low settings. What is the cause?
1 Answer Hello RC, if you are referring to both the dual elements on your unit you will need to replace the infinite switch part number DG44-01006B. Thanks! Read More...