Customer Questions and Answers for Washer Door Latch Assembly by Whirlpool

Kl, You will want to get door latch part number WP22003593.

Linda, It is very likely that the latch assembly will be the issue with the unit.

MK, the door latch assembly WP22004435 would be used for the model and serial number provided.

Dennis, For the model and serial you provided you will need to order part WP22003593

Lorie, The part number for the door latch assembly on this unit will be WP22003593.

Jeffrey, Even though all the keys work, this would be a faulty keypad due to when you hit start it beeps 3 times means the start button is bad and would need to replace the console for this.

Dick, the door latch solenoid more than likely has failed (door is fully shut and the hook is not bent). The solenoid can be tested and should measure within 30 to 100O. In regards to the latch used, if the serial number of your appliance starts with 17 or less, the latch WP22003593 would be used. If your serial number starts with 18 or higher, the latch WP22004435 would be used.

Rick, you may want to inspect the wiring harness to ensure there are no loose connections and that the wiring follows the side of the main control. If the wiring runs over the back of the main control, it can cause electrical interference and cause the unit to shut down randomly. If the wiring checks good, then the most likely issue is going to be a main control WP22004299 issue.

Jeffrey, the latch assembly for your series is going to be part number [WP22003593] as it is prior to the B5 series.

Hello Julie, WP22003593 does have a light made in it so you can connect those wires to the light socket.