Sandra October 31, 2015 for Model Number KP26M1XLC The model # shown on my Black 6 Qt Stand Mixer is KP26M1XLC. There are 2 parts lists for KP26M1XLC4 and KP26M1XLC5. Which one is for my model? I am needing to replace the panetary, transmission houseing and most of the gears.
1 Answer Sandra, The parts for both of the planetary and other gears are the same between the 2 units. The part number for the planetary on your unit is W11123171. Read More...
Erin May 01, 2015 for Model Number 9707977 I ordered the Planetary to make a repair on my KitchenAid mixer (model KP26M1XPM). When trying to reassemble the planetary, it appears the hole in the shaft for the retaining pin is a few mm too low. Once the worm gear goes on, the hole for the retaining pin is slightly covered by the worm gear. I have even replaced the worm gear thinking that the original was warped, but the problem was still there. Short of shaving down the retaining pin, I have no clue what to do to get past this step. (All parts match the model number of my machine.) Could my mixer be an older version of the current model? Please help.
1 Answer Erin, You will want to make sure that you have the correct shims on the planetary shaft. If you have the wrong ones on there then the worm gear will sit over the retaining pin hole. Read More...
Jon M. November 20, 2014 for Model Number kp26m1xlc I have a KitchenAid KP26M1XLC 6-Qt. Professional 600 Series Licorice color. I need to replace the panetary. Which part do I need and why in the model number options are there a KP26M1XLC4 or KP26M1XLC5 but no KP26M1XLC?
1 Answer Jon, usually there is a number digit spaced off to the side of the model that is considered the model. The planetary listed for KP26M1XLC models is part number W11123171. Thanks. Read More...
Bret November 15, 2014 for Model Number kv25goxmc What color is that part? I am looking for a Chrome Metallic Planetary.
Shea July 24, 2014 for Model Number KP26M1XPM I'm looking for a replacement planetary for a KitchenAid 6qt. professional, model # KP26M1XPM. Can you tell me which part# I would need and what color it is? Thanks!
1 Answer Shea, the planetary listed for your model is part number WP9708175. This is pearl metallic in color. Thanks! Read More...
Pismo July 09, 2014 for Model Number 4KP26M1XPM5 Does the planetary (part 9707977) include the gears, clips and washers?
Kim April 14, 2014 for Model Number KP26MIXPM Hi, I had a question earlier. You stated that mine would be the pearl metallic. Is that a white color? Mine is like a gunmetal gray color. Just want to make sure I get the right one the first time. Thanks for you help.
1 Answer Kim, pearl metallic is a pearl grayish color. The planetary is part number WP9708175 for the given model. You may click on the part number to view the color of the planetary. Thanks. Read More...
Kim April 13, 2014 for Model Number KP26MIXPM My mixer model # does not show up on any list. It does not have a 4 or 5 at the end of it. Will this planetary fit my model #? My serial # is WR5225190 if that helps any. Thanks!
1 Answer Hello Kim! The planetary, part number WP9708175, is compatible with KP26M1XPM model. However, this is a dark pewter. Your model calls for a pearl metallic color which is part number WP9708175. Thanks! Read More...
Cindy January 26, 2014 for Model Number KP26M1XWH5 My planetary keep fall off what parts do I need to fix
1 Answer Hello Cindy. Check and see if the pin WP9707223 is broke and needs to be replaced on the unit. Read More...
Dale September 19, 2013 for Model Number KV25GOXGR I have a KitchenAid 5 qt Stand Mixer bowl lift Model # KV25GOXGR. What part # planetary do I order? The color seems to be a dark brown/gray and is textured. Thank You.
1 Answer Dale, you'll need the imperial gray planetary. The part number is WP9708173. Thanks. Read More...